Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

About this Resource

Excerpt

Defines a SDES-SRTP Profile used by the Media List Profile Table.

REST API Methods for this Resource

Resource Schema

Configuration

Parameter Name Required Service Affecting Data Type Default Value Possible Values Description
DescriptionNoNostringnone64 - Max LengthDescribes this Media Crypto Profile so that it is easily identifiable.
OperationOptionNoNoEnum1Possible values:
  • 0 - soUnknown
  • 1 - soRequired
  • 2 - soOptional
  • 3 - soOff
Specifies how encryption is supported for this profile.
  • Required
    - This setting permits call connections only if security (encryption) can be used for the call.
  • If the peer device does not support SRTP (Secure Real Time Protocol) for voice encryption over the IP network, call setup will fail.
  • Supported
    - This setting advertises to the peer device that the SBC implements SRTP. However, a call connection is allowed in secure or unsecure mode depending on the peer preference and capability.
  • Off
    - This setting disables the use of SRTP for encrypted calling.
CryptoSuiteNoNoEnumstring1none64 - Max LengthPossible values:
  • 0 - scsCryptoSuite_32
  • 1 - scsCryptoSuite_80
  • 2 - scsCryptoSuite_Unknown
    This setting lets you configure the crypto suite that the SBC should use to negotiate with its peer device.
    MasterKeyLifeValueNoNoint31Possible values:
    • 0 - Minimum
    • 48 - Maximum
    The lifetime for the Master Key. The configured value is as power of 2.
    Info

    When this option is set to 0 means it never expires. Other wise it can take values from 1 to 48

    . This is applicable only for SBC 1000/2000 platforms.
    MasterKeyIdentifierLengthNoNoint1Possible values:
    • 0 - Minimum
    • 4 - Maximum
    The number of bytes that should be used for communicating the Master Key Identifier in the SRTP packets. The values 2 and 3 are applicable only for SBC 1000/2000 platforms.
    SessionKeyDerivationRateNoNoint0Possible values:
    • 0 - Minimum
    • 24 - Maximum
    The rate at which the session key should be refreshed during the SRTP session. The configured value is as power of 2. A value of 0 means that the session key will not be refreshed during the call. This is applicable only for SBC 1000/2000 platforms.
    Info

    This option is available when *Derive Session Key is Set* to a range 16 to 24.