Page History

...

1. In the SBC WebUI, click the Settings Tab.
2. In the left navigation pane, go to System > Licensing > Current Licenses.
3. Verify that Call Forking Feature is licensed as shown below.

1. is listed in the Feature Licenses.

Verify Lync/SBA Configuration and AD Integration

...

Related Information

...

Transformation Table Configuration

For details on field configuration, refer to Creating and Modifying Entries to Transformation Tables.

We will need three Transformation Tables created as shown below:

1. To SIP (Lync) transformation

   • Configure the "Calling Address/Number" and "Called Address/Number" translations

     Panel
     borderStyle none
     Caption 0 Figure 1 SIP Transformation Image Removed

     ..

2. To ipPhone attribute transformation:
   • Configure the "Called Address/Number" translations to normalize it to a "User Value" of AD attribute format (msRTCSIP-Line).

   • Configure the "User Value" translation to another AD attribute format "ipPhone"

     Panel
     borderStyle none
     Caption 0 Figure 1 ipPhone Attribute Transformation Image Removed

     .

3. To mobile attribute transformation:
   • Configure the "Called Address/Number" translations to normalize it to a "User Value" of AD attribute format (msRTCSIP-Line)

   • Configure the "User Value" translation to another AD attribute format "mobile"

     Panel

     borderStyle	none

     Caption

     0	Figure
     1	Mobile Attribute Transformation

     Image Removed

     .

     
     

     Pagebreak

Call Routing Table

We create three entries in a Call Route used for ISDN to Lync calls, as shown below:

. For details on field configuration, refer to Managing Call Routing Tables.

ISDN to Lync/SBA client route entry

...

• • Configure Fork Call

...

• • as Enabled.

  • Select Number/Name Transformation table for

...

• • ISDN to SIP

...

• • .

  • Select the applicable Destination Signaling Group.

    
    
    

ISDN to Lync/SBA client's ipPhone route entry

...

• • Configure Fork Call

...

• • as Enabled.

  • Select Number/Name Transformation Table for ipPhone.

  • Select the applicable Destination Signaling Group.

...

...

ISDN to Lync/SBA client's mobile device route entry

...

• • Configure Fork Call

...

• • as Disabled.

  • Select Number/Name Transformation Table for To Mobile.

  • Select the applicable Destination Signaling Group.
    
    

Inbound ISDN Signaling Group

The ISDN signaling group for inbound calls is must be configured to use the relevant Call Routing Table (configured in the previous section):

...

...

...

...