Page History

img.confluence-embedded-image { display: inline-block !important; }

...

1. Login into a terminal access software (such as Putty), and log into the KVM Hypervisor.
2. Start the Virtual Machine Manager.
3. From the list, click on the applicable VM instance.
4. Power down the VM.
5. Select Edit > Virtual Machine Details
6. Select View > Details or click the icon

7. From the menu, click CPUs.The 

   Spacevars
   0 product3

   supports 1, 2, 4 or 4 10 vCPUs.
   

   Pagebreak

   Caption
   0 Figure 1 Add vCPUs

8. Click Apply.

9. From the menu, click Memory. Each 

   Spacevars
   0 product3

   instance with 1 vCPU requires 1 GiB (1024 MiB) RAM; this amount is increased according to the number of vCPUs. Refer to SBC SWe Lite Hardware and Software Requirements.

   Caption
   0 Figure 1 Update Memory

10. Click Apply.
11. Start the VM instance. The 

    Spacevars
    0 product3

    is configured with the updated values.

...

1. Launch Hyper-V Manager from the Windows Start menu.
2. Power down the VM in which you will be adding vCPUs and RAM.
3. Right-click on the desired VM instance and select Settings.

4. Click on Memory. Each 

   Spacevars
   0 product3

   instance with 1 vCPU requires 1 GiB (1024 MiB) RAM; this amount is increased according to the number of vCPUs. Refer to SBC SWe Lite Hardware and Software Requirements.

   Caption
   0 Figure 1 Add memory

5. Enter the desired memory and click OK.

6. Click on Processor. The 

   Spacevars
   0 product3

   supports 1, 2, 4 or 4 10 vCPUs.

7. Enter the desired virtual processors and click OK.

   Caption
   0 Figure 1 Add vCPUs

8. Start the VM instance. The 

   Spacevars
   0 product3

   is configured with the updated values.

9. To verify the updated values, see Verify Update on SWe Lite.

...

1. Access vSphere Client.
2. Click on the applicable VM instance
3. Power down the VM.
4. From the Getting Started tab, click Edit virtual machine settings.

5. From the Hardware tab, click Memory.

    

   Caption
   0 Figure 1 Add Memory

6. Update the desired memory size. Each 

   Spacevars
   0 product3

   instance with 1 vCPU requires 1 GiB (1024 MiB) RAM; this amount is increased according to the number of vCPUs. Refer to SBC SWe Lite Hardware and Software Requirements.

7. From the Hardware tab, click CPUs.

   Caption
   0 Figure 1 Add vCPUs

8. Update the desired number of vCPUs. The 

   Spacevars
   0 product3

   supports 1, 2, 4 or 4 10 vCPUs.
9. Click OK.
10. Start the VM instance. The 

    Spacevars
    0 product3

    is configured with the updated values.

...