Page History

...

The following procedure describes how to install the 

1. Launch the EMA. Refer to Logging

...

1. into EMA in Platform Mode for guidance.

2. Navigate to Administration > System Administration > Software Install/Upgrade tab. The Packages screen is displayed.

3. Select the Package Name to install.

   Caption
   0 Figure 1 Selecting the SBC 5400 HA Application Package
   Image Modified

4. Click Install Software.
   The Install Software section expands and displays the Install Software, Management Ports (configured via the BMC) and System Configuration details.

   Caption
   0 Figure 1 Verifying the SBC 5400 HA Application
   Image Modified

5. Enter the System Configuration details.
   1. Select HA Pair in the HA Configuration field.
   2. Select System Name field and enter the system name.
   3. Select Local Hostname and enter local hostname.

   4. Select Peer Hostname and enter peer hostname.

      Caption
      0 Figure 1 SBC 5400 HA Configuration Screen
      Image Modified

   5. Choose the Active option for Server Role to designate the Active server.

...

1. 1. For SBC hardware type of installation, choose SBC Type

...

1. 1. as I-SBC.
      For SBC Type, choose from the options listed:

      SBC Type	Description
      I-SBC	Specifies an Integrated Signaling and Media network element (I-SBC). This is applicable for SBC on hardware environment (SBC 5000 Series, SBC 7000 Series, and SBC 5400).
      S-SBC	Specifies the SBC type as Signaling. The S-SBC (Signaling SBC) is applicable for SBC on Cloud environment.
      M-SBC	Specifies SBC type as Media. The M-SBC (Media SBC) is applicable for SBCona cloud environment.

   2. Select NTP Server IP field and enter the NTP server IP address. To identify your NTP Server IP, refer to Configuring SBC 5400 NTP Server Settings.
   3. Select NTP Server Time Zone field and enter the time zone.

2. Click Start Installation.
   The installation process begins and displays the installation status on the Installation Log section.
   The following actions are performed during the installation process:

   1. Pre-Installation Checks

      Caption
      0 Figure 1 Performing Pre-Install Checks for HA
      Image Modified

   2. Package content extraction:

      Caption
      0 Figure 1 Extracting the Package Contents for HA
      Image Modified

   3. Install

      Spacevars
      0 model5

       service.

      Caption
      0 Figure 1 Installing SBC Services for HA
      Image Modified

   4. Initialize

      Spacevars
      0 model5

       service and update the

      Spacevars
      0 model5

      host name.

      Caption
      0 Figure 1 Initializing SBC Service for HA
      Image Modified

...

...

1. 1. Reboot 

      Spacevars
      0 model5

       system.

      Caption
      0 Figure 1 Rebooting the SBC HA Application

...

1. 1. Image Added

2. Log on to EMA. The new SBC application version is displayed on the Monitoring > Dashboard > System and Software Info window.

   Caption
   0 Figure 1 SBC 5400 HA System and Software Info
   Image Modified

3. Verify the system status using Administration > System Administration > Platform Management menu.

...

...

2. From the EMA, install the SBC licenses required in order to use SBC application and its features. See 

...

1. Node-Locked

...

1. Licensing for

...

1. guidance.

2. Repeat steps 2 through 9 to install the SBC application on the Standby peer, but with the following changes to steps 5c, 5d, and 5e:

   • Step 5c. Enter Standby server name in Local Hostname field, which is typically the System Name with a letter “b” appended at the end.

   • Step 5d. Enter Active server name for Peer Hostname field, which is typically the System Name with a letter “a” appended at the end.

   • Step 5e. Choose Standby option for Server Role to designate the Standby server as the one you are configuring.

     Caption
     0 Figure 1 Standby Server Name in Local Hostname Field
     Image Modified

3. Click Start Installation.

4. Once the installation is completed, verify the system status for both "Active" and "Standby" servers using Monitoring > Dashboard > System and Software Info menu.

   Caption
   0 Figure 1 Verifying System Status for Active Server
   Image Modified

   Caption
   0 Figure 1 Verifying the System Status for Standby Server
   Image Modified

...

...

...

1.  

2. After the installation is complete on both the servers, verify the sync status using the show table system syncStatus CLI command: 
   
   

   Code Block
   admin@XXXX> show table system syncStatus SYNC MODULE STATUS --------------------------------------- Policy Data syncCompleted Disk Mirroring syncCompleted Configuration Data syncCompleted Call/Registration Data syncCompleted

   
   Status for all sync modules should be syncCompleted.

...