Page History

The EMS uses the EMS CALEACalea user role for all LI configuration operations and the admin user for communicating over netconf to the SBC. The EMS creates the SBC CALEA Calea user credentials automatically when an SBC registers to the EMS. Cloud Distributed SBC instances are registered dynamically in the EMS.

To configure the M-SBC LI through the CLI, refer to the following pages:

• Configuring M-SBC for Default LI using CLI
• Configuring M-SBC for IMS LI using CLI
• Configuring M-SBC for PCSI LI using CLI
• Configuring SBC For Lawful Interception

Prerequisites

To configure the CDC for a cloud an M-SBC instance:

• Instantiate an EMS SWe instance with LI interface support using an appropriate Heat template. For more information, refer to EMS Standalone Instantiation for Geographical Redundancy (GR) Deployment.
• Ensure that basic M-SBC configuration is completed as in M-SBC Cluster Configuration using SBC Configuration Manager.
• Enable the EMS CALEA EMS Calea user. For information, refer to Enabling Lawful Intercept on EMS Standalone.

Anchor
Configuring CDC using EMS CALEA User Account Configuring CDC using EMS CALEA User Account

Configuring CDC using the EMS

Calea User Account

For LI, CDC configuration is performed using the CDC Configuration Manager through the EMS. You can create CDC information only when logged in as the EMS CALEA EMS Calea user from the EMS CDC configuration window.

Anchor
config_cluster config_cluster

Configure Cluster CDC for

M-SBC Nodes

To configure a cluster CDC for cloud M-SBC nodes:

1. Log into EMS as an admin user.

2. Click Network > Cluster Management. The Cluster Management / Manage VNFs window opens listing the SBC clusters created on the EMS.

   Caption
   0 Figure 1 EMS Cluster/VNF List

3. Click the radio button adjacent to the name of the cluster you want to configure. The Details tab for the selected cluster opens by default. 

4. Click the Configurations tab. 

   Caption
   0 Figure 1 Cluster Configurations Tab

5. Click Edit Configuration. The SBC Configuration Manager opens in a separate window against the cluster's active OAM node.
6. Launch another EMS session as the CALEA userCalea user.
7. Under Monitoring, click Lawful Intercept. The Lawful Intercept window is displayed.

8. Click Cluster CDC. The Lawful Intercept/Cluster CDC window is displayed.

   Caption
   0 Figure 1 Lawful Intercept/Cluster CDC

9. Select the M-SBC cluster.

10. Click Launch CDC Configuration Manager. The SBC Configuration Manager window is displayed.

11. Create a call data channel for the M-SBC as described in the following procedure.

Anchor
Creating Call Data Channel for M-SBC Creating Call Data Channel for M-SBC

Creating a Call Data Channel for the M-SBC (Default, IMS, and PCSI LI)

The SBC SWe provides the ability to configure the IP address, TCP port, and other parameters used for communication towards the mediation server.

To create a new call data channel:

1. Perform the Configure Cluster CDC for M-SBC Nodes procedure.

2. In the SBC Configuration Manager window of the Calea user, navigate to Configuration > Intercept > Call Data Channel. The Call Data Channel window is displayed.

   Caption
   0 Figure 1 Call Data Channel Window

3. Select default from the Address Context drop-down menu. You can configure LI using the default Address Context only.

4. Click New Call Data Channel. The Create New Call Data Channel window is displayed.

5. Configure the Create New Call Data Channel panel for either the default, IMS, or PCSI LI. For descriptions of the parameters in the following tables, refer to Intercept - Call Data Channel.

   • Anchor
     default default

     To configure the CDC for the default LI, use the following table.

     Info
     title Note
     You cannot create or modify mediation servers for an M-SBC with a default LI. Since you cannot create mediation servers, you cannot configure the media TCP or media UDP for a default LI. For M-SBCs with a default LI, you can configure only the CDC. In the CDC configuration, you provide the IP Address and Port details.

     Caption
     0

   Figure

   • Table 1 Call Data Channel

   for M-SBC

   Image Removed

6. Click New Call Data Channel. The Create New Call Data Channel window is displayed.

7. • Parameters - Default LI

     Parameter Configuration Name Enter the name of the CDC configuration object. Intercept Standard Select one of the following options:Packetcable or Packetcable Plus Etsi. Vendor Id Select one of the following options: None, Utimaco, or Verint. Pri State Select Enabled. Sec State Select Enabled. Pri Mode Select Active. Sec Mode Select Active. Pri IP Address Enter the primary LI server's IP address where the SBC sends the CDC messages. Sec IP Address Enter the secondary LI server's IP address where the SBC sends the CDC messages. Pri Port Enter the primary LI server's UDP port where the SBC sends the CDC messages. KA Timer Enter the KA timer. Retries Enter the number of retries before the SBC considers the LI CDC as failed.

     See the following screen capture for an example configuration.

     Caption
     0 Figure 1 Create new Call Data Channel - Default LI
     Image Added

   • Anchor
     ims ims

     To configure the CDC for the IMS LI, use the following table.

     Caption
     0 Table 1 Call Data Channel Parameters - IMS LI
     Parameter Configuration Name Enter the name of the CDC configuration object. Intercept Standard Select one of the following options: Three Gpp or Etsi. Vendor Id Select one of the following options: None, Verint, Utimaco, or Group Two Thousand. Li Pol Dip For Regd Ood Msg Enable or disable the Li Pol Dip For Regd Ood Msg. Rtcp Interception Enable or disable the RTCP interception. Media IP Interface Group Name Select the name of the IP interface group you want to use. Dsr Protocol Version Enter the DSR protocol version.

     See the following screen capture for an example configuration

   Specify the following values:

8. Name: Type the name of the call data channel.

9. Intercept Standard: Select packetcable from the drop-down menu.

10. Vendor ID: Select ss8 from the drop-down menu.

11. RTCP Interception: Select Enabled.
Media IP Interface Group Name: Select the name of the media IP interface group you want to use from the drop-down menu

• .

  Caption
  0 Figure 1

Creating New

• Create new Call Data Channel - IMS LI

  Image Modified

• Anchor
  pcsi pcsi

  To configure the CDC for the PCSI LI, use the following table.

  Caption
  0 Table 1

Creating New

• Call Data Channel Parameters - PCSI LI

  Parameter Description Name

Specifies the

• Enter a name

of

• for the CDC configuration object. Intercept Standard

Specifies the intercept standard to use

• Select Packetcable. Vendor Id

Specifies the vendor of the LI server

• Select Ss8. RTCP Interception

Specifies whether to intercept RTCP data. The values are:

• Disabled (default) 
• Enabled

• Select Enabled. Media IP Interface

Media IP interface

• Group Name Select

a Media IP interface Group Name.

• the name of the media IP interface group you want to use.

  See the following screen capture for an example configuration.

  Caption
  0 Figure 1 Create new Call Data Channel - PCSI LI
  Image Added

12. Click Save. 

13. Click OK.

14. Click Apply Saved Changes and Close at the top-right of the SBC Configuration Manager window. When prompted,

15. Click Yes to confirm that you want to save and activate your configuration changesto close the window.

16. Return to the EMS session containing the SBC Configuration Manager for the OAM node and click click Apply Saved Changes and Close.

17. When prompted, confirm that you want to save and activate your configuration changes.
    

Creating Mediation Servers

After the call data channel is created, you must create mediation server objects associated with the call data channel. The CDC configuration supports up to eight mediation servers.

To create a mediation server object:

1. Perform the Configure Cluster CDC for M-SBC Nodes procedure.

2. In the SBC Configuration Manager window of the Calea user, navigate Navigate to Configuration > Intercept > Call Data Channel > Mediation Server. The Mediation Server window is displayed.

   Caption
   0 Figure 1 Mediation Server

3. Select default from the Address Context drop-down menu.

4. Select the Call Data Channel you created for the M-SBC from the drop-down menu.

5. Click New Mediation Server. The Create New Mediation Server window is displayed.

6. Type a mediation server name in Msname.

   Caption
   0 Figure 1 Creating New new Mediation Server

7. Click Save.

8. Click Ok. The object is created successfully.

   Info
   title Note
   You can repeat

   the

   the preceding steps to create

   up to

   a maximum of eight mediation servers for the M-SBC.

9. Click Close at the top-right of the SBC Configuration Manager window.

10. Click Yes to confirm that you want to close the window.

11. Return to the EMS session containing the SBC Configuration Manager for the OAM node and click Apply Saved Changes and Close.

12. When prompted, confirm that you want to save and activate your configuration changes.
    

Anchor
Mediation Server - Media - TCP Mediation Server - Media - TCP

Mediation Server - Media - TCP

This screen includes the LI Mediation Server TCP Media intercept parameters.

To view TCP parameters:

1. Perform the Configure Cluster CDC for M-SBC Nodes procedure.

2. In the SBC Configuration Manager window of the Calea user, navigate Navigate to Configuration > Intercept > Call Data Channel > Mediation Server > Media.

3. Click > TCP. The TCP window is displayed.

   Caption
   0 Figure 1 TCP

4. Select default from the Address Context drop-down menu.

5. Select the Call Data Channel from the drop down menu.

6. Select the Mediation Server from the drop-down menu. The configuration for the selected server opens. Caption0Figure1Editing TCP - Out of Service

   Image Removed

7. Use the following table to configure the server parameters. For more information, refer to Media - TCP.

   Info
   title Note:
   The mediation server parameters can only be updated when its State is Disabled and Mode is Out Of Service.

   Caption
   0 Table 1 TCP Parameters
   Parameter  Description IP Address V4 or V6 IPV4/IPV6 address of the mediation server for media interception over TCP.   Port Number Specifies the port number of the mediation server for media interception over TCP. Range is 0 - 65535. DSCP Value Specifies the DSCP value for intercepted media packets sent on TCP port. Default value is 16 and range is 0 - 63. Mode Specifies the mode of the TCP connection towards the mediation server for media interception. The options are: In Service Out of service (default) State Specifies the state of the TCP connection towards the mediation server for media interception. The options are: Disabled (default)  Enabled KA Time Specifies the duration between two keep alive transmissions while in idle condition. The default value is 180. KA Interval Specifies the duration between two successive keep alive re-transmissions, if acknowledgement to the previous keep alive transmission is not received. The default value is 30. KA Probe Specifies the number of re-transmissions to be carried out before declaring that the remote end is not available. The default value is 4.

   See the following screen capture for an example configuration.

   Caption
   0 Figure 1 Edit TCP - Out of Service
   Image Added

8. Click Save.
9. Click OK.

10. Enable the mediation server by changing its State to Enabled and Mode to In Service.

    Caption
    0 Figure 1 Edit TCP - In Service
    Image Added

11. Click Save to save the configuration.

12. Click Ok.

13. Click Apply Saved Changes and Close at the Close at the top-right of the SBC Configuration Manager window.
    

14. Click Yes to confirm that you want to close the window.

15. Return to the EMS session containing the SBC Configuration Manager for the OAM node and then click Apply Saved Changes and Close.

16. When prompted, confirm that you want to save and activate your configuration changes.
    

Mediation Server - Media - UDP

Use the following procedure to configure the media UDP.

1. Perform the Configure Cluster CDC for M-SBC Nodes procedure.
2. In the SBC Configuration Manager window of the Calea user, select Configuration > Intercept > Call Data Channel > Mediation Server > Media.

3. Click UDP.

   Caption
   0 Figure 1 UDP
   Image Added

4. Select default from the Address Context drop-down menu.

5. Select the CDC you created for the M-SBC from the Call Data Channel drop-down menu.

6. Select the mediation server you created for the M-SBC from the Mediation Server drop-down menu.

7. Use the following table to configure the Edit UDP panel. For descriptions of the parameters in this table, refer to Media - UDP.

   Info
   title Note
   You can update the mediation server parameters only when the State is Disabled and Mode is Out Of Service.

   Caption
   0 Table 1 UDP Parameters
   Parameter  Configuration IP Address V4 or V6 Enter the IPv4 or IPv6 address of the mediation server for the media interception over UDP. Port Number Enter the port number of the mediation server for the media interception over UDP. DSCP Value Enter the DSCP value of the intercepted media packets sent on the UDP port. Mode Select Out of Service. State Select Disabled.

   See the following screen capture for an example configuration.

   Caption
   0 Figure 1 Edit UDP - Out of Service
   Image Added

8. Click Save.
9. Click Ok.
10. Configure the Edit UDP panel with the following values to enable the mediation server:
    1. Mode: Select In Service.
    2. State: Select Enabled.

    Caption
    0 Figure 1 Edit UDP - In Service
    Image Added

11. Click Save.

12. Click Ok.

13. Click Close at the top-right top of the SBC Configuration Manager window.
    

14. Click Yes to confirm that you want to close the window.

15. Return to the EMS session containing the SBC Configuration Manager for the OAM node and then click Apply Saved Changes and Close.

16. when you have completed making configuration changes. When prompted, confirm that you want to save and activate your configuration changes. 
    

Anchor
Viewing Statistics for M-SBC Viewing Statistics for M-SBC

Viewing Statistics for M-SBC 

To view mediation server media statistics:

1. Log onto the EMS as the CALEA the Calea user.
2. Under Monitoring, click Lawful Intercept. The Lawful Intercept window is displayed.

3. ClickClick Cluster CDC. The Lawful Intercept/Cluster CDC window is displayed.

4. Select the M-SBC cluster.

5. Click View Nodes. The nodes list in the cluster is displayed.

   Caption
   0 Figure 1 View Nodes

6. Select the node to view the mediation server media status and click Launch Node LI Stats. The Mediation Server Media Status window is displayed.

   Caption
   0 Figure 1 Mediation Server Media Status