Page History
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Additional sections:
|
| Add_workflow_for_techpubs | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
| Include Page | ||||
|---|---|---|---|---|
|
Use
...
the Services window to edit parameters associated with various enhanced services and features for
...
a selected SIP trunk group.
To View and Edit Services
On the SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group >
...
SIP Trunk Group > Services
...
or
Configuration > System Provisioning > Category: SIP Carrier Peering > SIP Trunk Group > Services or
All > Address Context > Zone > SIP Trunk Group > Services
The Services window is displayed.
...
For the trunk group you want to edit, use the drop-down
...
boxes to select the
...
appropriate address context, zone, and SIP trunk group name. The Edit Services window is displayed for the selected trunk group.
| Caption | |||
|---|---|---|---|
|
...
| |
...
...
Use the following table to configure the options and then click Save.
| Caption | |||
|---|---|---|---|
|
...
| |
Parameter | Description |
|---|---|
DNS Support Type | Indicates whether to use the DNS server for just A-record lookups, or for full NAPTR/SRV/A lookup as specified in RFC3263.
|
Preconditions | Indicates level of preconditions support for incoming (only) requests. For precondition support of outgoing requests, see Transmit Preconditions |
...
below.
| ||||||
Transmit Preconditions |
...
| Specifies the level of preconditions support for outgoing |
...
| requests/ |
...
| responses. |
...
|
...
|
...
| |
Precondition Intwk Using183 | (This flag is for specific call flows and is not intended for generic use) Enable this flag to locally generate first 183 responses for preconditions interworking before egressing INVITE. If disabled, these responses are dropped.
|
...
Note: Do not enable Precondition Intwk Using183 when End-to-End Prack is configured.
| ||||||
| Honor Sdp Clock Rate | Enable this flag to allow the mapping of up to five DTMF Payload Types (PT), each with a different clock rate of a preferred or selected payload type for audio. If the flag is disabled, all DTMF PTs except 8 kHz (both send and receive) are dropped.
| |||||
Sip Ars Profile | Specifies the name of the SIP ARS (Address Reachability Service) profile. | |||||
Disconnect Treatment Profile | Specifies the name of the Disconnect Treatment Profile. | |||||
Emergency Call Profile | Specifies the name of the Emergency Call Profile. | |||||
| Hplmn Profile | Specifies the name of an HPLMN Profile to use in handling emergency calls from outbound roaming users when S8 Home Routing (S8HR) is in use. Refer to Emergency Call Handling for the Roaming Users in S8HR Model. | |||||
| Vplmn Profile | Specifies the name of a VPLMN Profile to use in handling emergency calls from outbound roaming users when S8 Home Routing (S8HR) is in use. Refer to Emergency Call Handling for the Roaming Users in S8HR Model. | |||||
Sip Security Profile | Specifies the name of the SIP Security Profile. | |||||
| Dynamic Blacklist Profile | Specifies the name of the Dynamic Blacklist Profile. | |||||
Emergency Call Handling Mode | Use this parameter to specify how to handle emergency calls |
...
. Note: To use any of the first three options, Use Psx Route For Emergency Call must also be enabled.
|
...
...
“Use Psx Route For Emergency Call” must also be enabled to use this option.
...
|
| Note |
|---|
“ |
...
|
| Note |
|---|
“ |
See Emergency Registration for emergency registration functionality. | |
JSRC Bandwidth Reservation | If disabled at the global level, the Trunk Group configuration will not be applied. The options are:
|
Remote EPreservation | If disabled at the global level, the Trunk Group configuration will not be applied. The options are:
|
SIP JIP Profile | Specifies the name of |
...
the SIP JIP Profile. defaultJipProfile is the name of the default SIP JIP profile assigned to SIP trunk groups. You can select the name of a custom profile you created. Refer to Service Profiles - SIP JIP Profile. Note: This parameter is only supported when the SBC is configured to use an external PSX. | |
SIP Jurisdiction Support | Enable this flag to allow |
...
sending JIP information in SIP-SIP, SIP-SIP-I and SIP-I to SIP scenarios.
|
...
| Note: This |
...
| parameter is only supported when the SBC is configured to use an external PSX. | |
| Transparency Profile | Specifies the name of the Transparency Profile to associate with this SIP Trunk Group. |
| SIP Rec Metadata Profile | Specifies the name of a SIP Rec Metadata Profile to associate with the SIP Trunk Group. This type of profile should be assigned to the SIP Trunk Group for the SIP Session Recording Server. Refer to Services - SIP Rec Metadata Profile for more information. |
| SIP Param Filter Profile | Specifies the name of the SIP Param Filter Profile (SPF). The SPF defines the Allowed, Supported and Required headers parameter is filter/passed. |
| Use Previous Learned IP Address | Enable this |
...
option to latch on Previous Learned IP Address before performing SRV DNS Lookups, while sending mid-dialog SIP requests.
| |||||||
| Hpc Call Profile | Specifies the name (1-23 characters) of the HPC Call Profile. The possible states are:
| ||||||
| Dialog Event Notification Supported | Use this flag to support notification for a SUBSCRIBE with dialog event in this Trunk Group.
| ||||||
| Colocated Pand Ecscf | Use this flag to support co-locating P-CSCF and E-CSCF on the ingress Trunk Group.
|
...
| Test Call Number Profile | The name (1-23 characters) of the Test Call Number Profile. The | ||||||||||||||||||||||||
| Privacy Profile | Select the name of Privacy Profile to apply to the SIP trunk group. Refer to Services - Privacy Profile for information. | ||||||||||||||||||||||||
| Sti Profile | Select a Secure Telephone Identify (Sti) Profile to apply to the SIP trunk group. Refer to Services - Sti Profile for information. |
Additional topics:
| Div | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
| Pagebreak |
|---|
Overview
Content Tools