Versions Compared

Old Version 8

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Add_workflow_for_techpubs
AUTH1eyoustra
REV5bscoggins
REV6bscoggins
REV3sashukla
REV1spanda

 

The Packet Port Status window displays a node's negotiation speed and link state.

From the

Spacevars
0product
 main screen, navigate to Monitoring > Dashboard >Ports > Ethernet Port > Packet Port Status. Status or
Monitoring > System > Category: Hardware Status > Ports > Ethernet Port > Packet Port Status
All > Ethernet Port > Packet Port Status

The Packet Port Status window displays.

Info
titleNote:

The following two figures show example Packet Port Status output. Depending on your hardware model and interface configuration, the output will differ.

Caption
0Figure
1 Packet Port Status - 4 x 1 Gbps Mode for Standalone 5400 Example

Caption
0Figure
1 Packet Port Status - 2 x 10 Gbps Mode for HA 5400 Example

 

The following fields are output is displayed:

Caption
0Table
1Packet Port Status parameters
ParameterDescription
CE NameThe server name.
Port NameThe name of this port.
If IndexThe unique interface index of this management NIF.
Mac AddressThe MAC address of the network interface.
Negotiated SpeedThe negotiated interface speed.
Max Bandwidth

This parameter shows the maximum bandwidth that the port is capable of supporting

For example,

  • For SBC 7000 Series platform, 95% of 10 Gigabit (Gb) port is 1,187,500,000 bytes/second.
  • For SBC 5000 Series platform, 95% of 1 Gb port is 118,750,000 bytes/second.
Allocated BandwidthThe bandwidth (bytes/second) allocated for a particular port for active media streams.
Rx Actual BandwidthThe actual Rx bandwidth, which is used for a particular port (bytes/second).
Tx Actual BandwidthThe actual Tx bandwidth, which is used for a particular port (bytes/second).
Bandwidth Usage This parameter shows the percentage of load (Allocated Bandwidth) for a particular port using the formula:
Allocated Bandwidth/Max Bandwidth * 100
Bandwidth DeviationThis parameter shows the percentage of deviation of actual bandwidth from allocated bandwidth.
Link StateThe state of the interface.

Pagebreak