Page History

...

Review Before you Begin - Latest Security BulletinsAnnouncements/Software/Security Patches Available and then select an option below that matches your system status.

Before you Begin - Latest Security

...

Announcements/Software/Security Patches Available

Security

...

Announcements

Security Vulnerability Bulletins Announcements provide information for protecting the SBC against specific security threats. To view the latest information about security bulletins announcements impacting

...

All software and security updates are available from Ribbon Support Portal.

...

1. Follow the installation and setup instructions in the Quick Start card (SBC 1000 Quick Start or  SBC 2000 Quick Start ) included with the device.
2. Run initial setup. Refer to Running Initial Setup.
3. Determine the software release version installed on the SBC. Refer to Viewing the Software Version and Hardware ID.
4. If required, download the latest software from the Ribbon Support Portal. For instructions, refer to the Ribbon SBC Edge Support Portal - Download Center.
   
   1. SBC Comms – UXCOMMSVC-releaseX.X.X.buildxxx.zip
   2. SBC Software – 

      Spacevars
      0 series

      (sbc1000-release-X.X.X.buildXXX.img), 

      Spacevars
      0 series2

      (sbc2000-release-X.X.X.buildXXX.img).

   3. ASM Roll-up – ASM-ROLLUP-UPDATESXXX-XX.zip

   4. ASM Cumulative Updates – ASM-UPDATES-XXX_YYY-ZZZ_UX1k2k-release3.0.x-and-later.zip  

      Note
      To identify the most current software, see Ribbon Support Portal.

5. Upgrade the SBC Comms. Refer to Upgrading the SBC Communication Service Version.
6. Upgrade the SBC software. Refer to Upgrading or Downgrading the SBC 1000/2000.

7. Upload and apply the ASM Roll-up. Refer to ASM Roll-up Update.

   Info
   To apply the ASM Roll-up, internet access is required. An alternative approach is to apply the ASM updates using a WSUS server deployed by your Enterprise. Refer to Installing a WSUS.

8. For the Skype/Lync SBA, download and apply the latest Cumulative Updates. Refer to Installing Cumulative Updates for Lync SBA.
9. Apply the Ribbon-approved Sophos Antivirus software (if desired). Refer to  Installing Sophos Antivirus and Ransomware Protection on the ASM.

Anchor
RunInitialSetupCCE RunInitialSetupCCE

For Systems with Cloud Connector Edition (CCE)

...

1. Follow the installation and setup instructions in the Quick Start card ( SBC 1000 Quick Start or  SBC 2000 Quick Start) included with the device.
2. Run initial setup. Refer to Running Initial Setup.
3. Determine the software release version installed on the SBC. Refer to Viewing the Software Version and Hardware ID.
4. If required, download the latest software from the Ribbon Support Portal. For instructions, refer to the Ribbon SBC Edge Support Portal - Download Center.
   
   1. SBC Software –

      Spacevars
      0 series

      (sbc1000-release-x.x.x.buildxxx.img), 

      Spacevars
      0 series2

      (sbc2000-release-x.x.x.buildxxx.img)
5. Upgrade the SBC software. Refer to Upgrading or Downgrading the SBC 1000/2000.
6. Configure the SBC for CCE-related data. Refer to Integrating With Office 365.
7. Apply the Ribbon-approved Sophos Antivirus software (if desired). Refer to Installing Sophos Antivirus and Ransomware Protection on the ASM .

...

1. Follow the installation and setup instructions in the Quick Start card (SBC 1000 Quick Start or SBC 2000 Quick Start) included with the device.
2. Run initial setup. Refer to Running Initial Setup.
3. Determine the software release version installed on the SBC. Refer to Viewing the Software Version and Hardware ID.
4. If required, download the latest software from the Ribbon Support Portal. For instructions, refer to the Ribbon SBC Edge Support Portal - Download Center.
   

   1. SBC Software – 

      Spacevars
      0 series

      (sbc1000-release-X.X.X.buildXXX.img), 

      Spacevars
      0 series2

      (sbc2000-release-X.X.X.buildXXX.img)
      
      

      Note
      To identify the most current software, see Ribbon Support Portal.

5. Upgrade the SBC software. Refer to Upgrading or Downgrading the SBC 1000/2000.
   
   

...

Anchor
InstallExistingASM InstallExistingASM

For Systems with SBA (Survivable Branch Appliance)

...

1. Determine the software release version installed on the SBC. Refer to Viewing the Software Version and Hardware ID.
2. For the latest software and security patches, download the necessary files from the Ribbon Support Portal. For instructions, refer to the Ribbon SBC Edge Support Portal - Download Center.
   1. SBC Comms – UXCOMMSVC-releaseX.X.X.buildXXX.zip
   2. SBC Software –

      Spacevars
      0 series

      (sbc1000-release-X.X.X.buildXXX.img), 

      Spacevars
      0 series2

      (sbc2000-release-X.X.X.buildXXX.img)

   3. ASM Roll-up – ASM-ROLLUP-UPDATESXXX-XX.zip

   4. ASM Cumulative Updates – ASM-UPDATES-XXX_YYY-ZZZ_UX1k2k-release3.0.x-and-later.zip
      

      Note
      To identify the most current software, see Ribbon Support Portal.

3. Upgrade the SBC Comms. Refer to Upgrading the SBC Communication Service Version.
4. Upgrade the SBC Software. Refer to Upgrading or Downgrading the SBC 1000/2000.

5. Upload and apply the ASM Roll-up. Refer to ASM Roll-up Update.

   Info
   To apply the ASM Roll-up, internet access is required. An alternative approach is to apply ASM updates using a WSUS server deployed by your Enterprise. Refer to Installing a WSUS.

6. For the ASM deployed as a Skype/Lync SBA, download and apply the latest Cumulative Updates. Refer to Installing Cumulative Updates for Lync SBA.
7. Apply the Ribbon-approved Sophos Antivirus software (if desired). Refer to Installing Sophos Antivirus and Ransomware Protection on the ASM.
   
   

...

1. Determine the software release version installed on the SBC. See Viewing the Software Version and Hardware ID.
2. For the latest software, download the necessary files from the Ribbon Support Portal. Refer to the Ribbon SBC Edge Support Portal - Download Center.
   1. SBC Firmware – 

      Spacevars
      0 series

      (sbc1000-release-X.X.X.buildXXX.img), SBC 2000

      Spacevars
      0 series2

      (sbc2000-release-X.X.X.buildXXX.img)
3. Verify the configuration for accepting CCE automatic updates. Refer to Managing Your Office 365 Tenant.
4. Verify the configuration for accepting Windows updates automatically or manually. Refer to Managing Your Office 365 Tenant.

...

1. Determine the software release version installed on the SBC. Refer to Viewing the Software Version and Hardware ID.
2. For the latest software and security patches, download the necessary files from the Ribbon Support Portal. For instructions, refer to the Ribbon SBC Edge Support Portal - Download Center.
   

   1. SBC Software –

      Spacevars
      0 series

      (sbc1000-release-X.X.X.buildXXX.img), 

      Spacevars
      0 series2

      (sbc2000-release-X.X.X.buildXXX.img)

      Note
      To identify the most current software, see Ribbon Support Portal.

3. Upgrade the SBC Software. Refer to Upgrading or Downgrading the SBC 1000/2000.

...