...
| Info |
|---|
For the | | Ribbon 2000 CAS Signaling Group Guidlines |
|
- Ribbon recommends that no more than 24 FXS ports are assigned to an Analog CAS Signaling Group.
- If FXS Hotline is enabled, the maximum number of ports assigned to a
SBC 2000, each Analog - CAS Signaling Group is limited to
a maximum of 24 FXS ports.- 24 ports. On an SBC 2000 (which supports 48 FXS ports), two CAS signaling groups are required to cover all 48 ports.
|
To create or modify an existing CAS Signaling Group:
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Specifies the call information digit separating calling and called numbers. Select from the drop down list. Valid entry: A, B, D, # or *. Default entry: *. This field is available only when Call Information Format is set to Calling-Called or Called-Calling. |
End Digit
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Specifies the last digit of call information sent or received. Select from the drop down list. Valid entry: A, B, D, # or *. Default entry: *. This field is available only when Call Information Format is set to Calling-Called or Called-Calling. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Specifies a specific phone number to assign to a channel. |
Enable FXS Hotline| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables a user or device to seize an FXS line on the SBC and have it automatically routed to a pre-configured destination number. If enabled, this number is configured in the Hotline Number field. Valid entries: Yes or No. |
...