Page History

Anchor

	top
	top

Tip
Usage of the Easy Config wizard to configure the Sonus SBC 1000/2000 does not modify existing configuration. The wizard will simply add the new configuration elements to the Sonus SBC 1000/2000.

Info
SBC Easy Configuration supports IPv4 only, not IPv6.

The Sonus SBC 1000/2000 Easy Config interface includes a built-in step-by-step setup configuration wizard, which enables end-users to quickly deploy Sonus SBC 1000/2000 and Skype for Business/Lync. The Sonus SBC 1000/2000 can be configured to connect a Skype for Business/Lync environment to a SIP trunk using the automatic setup wizard as described in the section below.

The following SIP Trunks are supported:

Generic SIP Trunk
AT&T IP Flexible Reach
Verizon Managed Service
KDDI SIP Trunk

Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.

Table of Contents

maxLevel	3

Step 1 - Select Scenario

Note
These instructions assume the SBC Easy Config wizard is running. See Running Easy Configuration Wizard.

Select the Application type (SIP ↔ Microsoft UC). Enter the scenario configuration details based on your deployment settings. Once completed, click Next to move to Step 2 (or Cancel to return to the main WebUI screen).

Scenario Parameters - Field Definitions

Section

Column

width	600px

Panel

borderStyle	none

Caption

0	Figure
1	Step 1

Image Removed

Add_workflow_for_techpubs

AUTH1	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb41059c, userName='null'}
JIRAIDAUTH	SYM-27506
REV5	UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}
REV6	UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}
REV3	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ca2f03d1, userName='null'}
REV1	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cc5207f0, userName='null'}

The SBC Easy Config interface includes a built-in, step-by-step setup configuration wizard to enable quick and easy deployment of an SBC and Skype for Business/Lync or Teams in a Microsoft On Premises environment.

Info
Using the Easy Configuration wizard to configure the (SBC) does not modify existing configuration. The wizard will simply add the new configuration elements to the SBC.

The following SIP Trunks are supported:

ATT SIP Trunk
KDDI SIP Trunk
NTT DOCOMO Officelink
Other SIP Trunk
Softbank White Office
Telstra Enterprise SIP Connect
Verizon SIP Trunk

Info
NTT DOCOM Officelink, Softbank White Office and Telstra Enterprise SIP Connect are supported in SBC Edge 1000-2000 only.

Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.

Table of Contents

maxLevel	3

Step 1 - Select Scenario

Select the Application type (SIP ↔ Microsoft On Premises). Specify the scenario details in the fields that apply for your deployment. When you have selected values for all fields, click Next to move to Step 2. Or, click Cancel to return to the main WebUI screen.

Info
These instructions assume the SBC Easy Config wizard is running. See Using the Easy Configuration Wizard.

Scenario Parameters - Field Definitions

Caption

0	Figure
1	Step 1

Image Added

Application

Panel

bgColor	#FAFAFA
borderStyle	none

Click the arrow to select the scenario that describes your deployment. In this case, select SIP Trunk ↔ Microsoft On Premises.

Scenario Description

Panel

bgColor	#FAFAFA
borderStyle	none

Type up to 32 characters as a descriptive name for the SIP Trunk ↔ Microsoft On Premises scenario.

Info
The Easy Config adds the scenario description as a prefix for all SBC configuration elements created for this deployment.

Telephone Country

Panel

bgColor	#FAFAFA
borderStyle	none

The country in which the SIP ↔ Microsoft On Premises deployment originates.

Emergency Services

Panel

bgColor	#FAFAFA
borderStyle	none

Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below.

Options: ELIN Identifier, E911/E112 or None.

Info
The E911 ELIN number from the "CompanyName" field configured in Lync location services is used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Setup. For more information, see Creating and Modifying Entries to Transformation Tables.

Emergency Callback Number 1

Panel

bgColor	#FAFAFA
borderStyle	none

Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.

Emergency Callback Number 2

Panel

bgColor	#FAFAFA
borderStyle	none

Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.

PSAP Number

Panel

bgColor	#FAFAFA
borderStyle	none

Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters.

SIP Sessions

Panel

bgColor	#FAFAFA
borderStyle	none

Number of simultaneous SIP sessions allocated. Valid entry 1 - 960.

Name (SIP Trunk)

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP trunk used for connection to the Microsoft UC environment. Valid options are: ATT SIP Trunk, KDDI SIP Trunk, NTT DOCOMO Officelink, Other SIP Trunk,SoftBank White Office, Telstra Enterprise SIP Connect, and Verizon SIP Trunk.

The SIP Trunk selected determines the field options displayed in Step 2. See See Step 2 - Configure SIP Details for Endpoint.

Version (Microsoft On Premises)

Panel

bgColor	#FAFAFA
borderStyle	none

Defines the version of Microsoft On Premises. Valid options: Skype for Business, Lync 2010/2013, or Microsoft Cloud Connector Edition.

Step 2 - Configure SIP Details for Endpoint

Enter the scenario configuration details based on the SIP Trunk selected in Step 1 - Select Scenario. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).

ATT SIP Trunk - Field Definitions

These fields apply if you selected ATT SIP Trunk in Step 1 - Select Scenario.

Caption

0	Figure
1	ATT SIP Trunk

Image Added

Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

The FQDN or IP address of the Remote Peer service provider.

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP.

Port Number

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.

Use Secondary Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

Enables or disables the secondary Remote Peer service provider configured.

Secondary Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

Port Number

Panel

bgColor	#FAFAFA
borderStyle	none

The Port Number is used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.

AT&T Simultaneous Ring Supported (AT&T Services)

Panel

bgColor	#FAFAFA
borderStyle	none

Enables/disables AT&T Simultaneous Ring. Valid option: Yes or No.

AT&T IP Toll Free

...

Panel
bgColor #FAFAFA
borderStyle none
The scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ Microsoft UC.
...
Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled.

IP Toll Free Access Number

Panel

bgColor	#FAFAFA
borderStyle	none

Enter the name to describe Microsoft UC setup.

Info
This value will be prefixed on all the Sonus SBC 1000/2000 configuration elements created by the Setup Wizard pertaining to this deployment.

...

The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled.

Server Pool Host (Skype for Business)

Panel

bgColor	#FAFAFA
borderStyle	none

The country in which the SIP ↔ Microsoft UC setup originates.

Emergency Services

Note
The E911 Elin number from the "CompanyName" field configured in Lync location services is used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Setup. For more information, see Creating and Modifying Entries to Transformation Tables.

Pool name of the Lync Server (FQDN).

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP.

Port Number (Server Pool)

Panel

bgColor	#FAFAFA
borderStyle	none

Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below.

Options: ELIN Identifier, E911/E112 or None.

Emergency Callback Number 1

Panel

bgColor	#FAFAFA
borderStyle	none

Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.

Emergency Callback Number 2

The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host.

Pagebreak

KDDI SIP Trunk - Field Definitions

These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.

Caption

0	Figure
1	KDDI SIP Trunk
3	KDDI SIP Trunk

Image Added

SIP Server

Panel

bgColor	#FAFAFA
borderStyle	none

Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.

...

Type the FQDN for the service provider's SIP server.

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters.

...

Hardcoded to UDP.

Port Number

Panel

bgColor	#FAFAFA
borderStyle	none

Number of simultaneous SIP sessions allocated. Valid entry 1 - 960.

...

Type the port number used for sending and receiving SIP messages between the SBC and the Border Element Server.

Main Telephone Number

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP trunk used for connection to the Microsoft UC environment. Valid options: Generic SIP Trunk, AT&T IP Flexible Reach, Verizon Managed Service, and KDDI SIP Trunk.

The SIP Trunk selected determines the field options displayed in Step 2. See See Step 2 - Configure SIP Details for Endpoint.

...

main telephone number for the KDDI SIP trunk

Called Prefix (FMC Service)

Panel

bgColor	#FAFAFA
borderStyle	none

Type the city code and office code for setting up transformation rules for the FMC service.

Address of Record URI

Panel

bgColor	#FAFAFA
borderStyle	none

Defines

Type the

version of Microsoft UC. Valid options: Skype for Business, Lync 2010/2013 or Microsoft Cloud Connector Edition

Noprint
Back to top

Step 2 - Configure SIP Details for Endpoint

Enter the scenario configuration details based on the SIP Trunk selected in Configure SIP Trunk with Microsoft UC. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).

Generic SIP Trunk - Field Definitions

These fields apply if you selected Generic SIP Trunk in Configure SIP Trunk with Microsoft UC.

Section

Column

width	600px

Panel

borderStyle	none

Caption

0	Figure
1	Generic SIP Trunk

Image Removed

Address of Record of the client that is registered on the SIP server.

Static Host (SIP Profile)

Panel

bgColor	#FAFAFA
borderStyle	none

Type the host and port information for the FQDN or IP address used in the From Header. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port

Pagebreak

Authentication ID (Remote Authorization Entry)

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies a user name to use in response to a challenge.

Password

Panel

bgColor	#FAFAFA
borderStyle	none

The password for the Authentication ID.

Confirm Password

Panel

bgColor	#FAFAFA
borderStyle	none

Re-enter the password for the Authentication ID.

DNS Server IP (Split DNS Table)

...

Panel
bgColor #FAFAFA
borderStyle none
The FQDN or IP address of the Session Border Controller service provider.
...
(IPv4 or IPv6) of the DNS server. The DNS Server IP address is for an SBC 1000/2000 that uses Split DNS with a primary DNS server, secondary DNS server, and a domain-specific DNS server for resolving FQDNs as required on internal and external networks.

Domain Name

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP.

Port Number (Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.

Use Secondary Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

Enables or disables the secondary Session Border Controller service provider configured.

...

Domain name associated with the DNS IP address.

Caption

0	Figure
1	Select ISDN Ports

Image Added

Pagebreak

NTT DOCOMO Officelink- Field Definitions

These fields apply if you selected NTT DOCOMO Officelink in Step 1 - Select Scenario.

Caption

0	Figure
1	NTT DOCOMO Officelink Trunk

Image Added

Office Link FOMA-R

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.

...

The Host IP address of the SIP Server.

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

...

The IP protocol used for sending and receiving SIP messages between SBC and the SIP Server. Default value: UDP.

Port Number

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP Server Port Number number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is EnabledSIP Server. Default value: 5062.

CUG Domain Name

Panel

bgColor	#FAFAFA
borderStyle	none

The FQDN of the SIP Server.

Server Pool Host (Skype for Business)

Panel

bgColor	#FAFAFA
borderStyle	none

The Pool name FQDN or IP Address of the Lync Server (FQDN).

Protocol

...

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol used to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host. Valid entry: TLS or TCP.

Port

...

bgColor	#FAFAFA
borderStyle	none

number

The Port Number (via TLS or TCP) used for sending and receiving SIP messages between

...

SBC

...

and the Server

...

Pool Host. Default value: 5067.

Other SIP Trunk

Noprint
Back to top

...

- Field Definitions

...

borderStyle	none

These fields apply if you selected AT&T IP Flexible Reach in Configure SIP Trunk with Microsoft UC.

...

width	600px

Other SIP Trunk in Step 1 - Select Scenario.

Caption

1
0	Figure

...

Other SIP Trunk

Image Added

...

Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

The FQDN or IP address of the Session Border Controller the Remote Peer service provider.

...

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP.

Port Number

...

Panel
bgColor #FAFAFA
borderStyle none
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.

Use Secondary Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

Enables or disables the secondary Session Border Controller secondary Remote Peer service provider configured.

Secondary Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.

Protocol

...

Panel
bgColor #FAFAFA
borderStyle none
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

Port

...

Number

Panel

bgColor	#FAFAFA
borderStyle	none

The Port Number is used for sending and receiving messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.

AT&T Forking Feature

Server Pool Host (Skype for Business)

Panel

bgColor	#FAFAFA
borderStyle	none

Enables/disables AT&T Forking Feature. Valid option: Yes or No.

...

The Pool name of the Lync Server (FQDN).

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled.

...

The IP protocol used for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP.

Port Number (Server Pool)

Panel

bgColor	#FAFAFA
borderStyle	none

The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled.

Server Pool Host

Panel

bgColor	#FAFAFA
borderStyle	none

The Pool name of the Lync Server (FQDN).

...

Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host.

Pagebreak

SoftBank White Office - Field Definitions

These fields apply if you selected SoftBank White Office in Step 1 - Select Scenario.

Caption

0	Figure
1	SoftBank White Office

Image Added

WAN Link

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host. Valid entry: TLS or TCP.

...

method used for connecting networks. Options are: Routerless and Router. On selection of Routerless, the Easy Config displays the Signaling/Media Source IP field and the SIP Server field. On selection of Router, the Easy Config displays the SIP Server field only.

Signaling/Media Source IP

Panel

bgColor	#FAFAFA
borderStyle	none

The Port Number (via TLS or TCP) used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host.

Noprint
Back to top

Verizon Managed Service - Field Definitions

These fields apply if you selected Verizon Managed Service in Configure SIP Trunk with Microsoft UC.

Section

Column

width	600px

Panel

borderStyle	none

Caption

0	Figure
1	Verizon Managed Service

Image Removed

Click the arrow and select the user-specified IP address to be used for SIP signaling messages. The Signaling/Media Source IP field does not display when the option selected for the WAN Link field is Router.

SIP Server

Panel

bgColor	#FAFAFA
borderStyle	none

The host IP address or FQDN for the SIP server

Gateway ID (Remote Authorization Entry)

Panel

bgColor	#FAFAFA
borderStyle	none

The ID used for authenticating with the router at the gateway of the network

Gateway Password

...

Panel
bgColor #FAFAFA
borderStyle none
The FQDN or IP address of the Session Border Controller service provider.
...
password used for authenticating with the router at the gateway of the network.

Confirm Password

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. This value is fixed at UDP.

...

Re-entry of the password for the router serving as network gateway.

Address of Record URI (Contract Registrant Entry)

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Serverpublic address that points to the domain for users, for use in the Contact Registrant Entry. For example, enter GatewayID@SIPServer.

Server Pool Host

Panel

bgColor	#FAFAFA
borderStyle	none

The Pool name FQDN or IP Address of the Skype for Business / Lync Server (FQDN).

Protocol

...

Panel
bgColor #FAFAFA
borderStyle none
The IP protocol used to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host. Valid entry: TLS or TCP.

Port

...

bgColor	#FAFAFA
borderStyle	none

number

The Port Number (via TLS or TCP) used for sending and receiving SIP messages between

...

SBC

...

and the Server Pool Host.

...

Default value: 5067.

Telstra Enterprise SIP Connect

Noprint
Back to top

...

- Field Definitions

...

These fields apply if you selected KDDI SIP Trunk in Configure SIP Trunk with Microsoft UC.

...

width	600px

Telstra Enterprise SIP Connect in Step 1 - Select Scenario.

Caption

1
0	Figure

...

Telstra Enterprise SIP

...

Connect

...

Image Removed

Image Added

NAT Public Interface

...

Panel
bgColor #FAFAFA
borderStyle none
The FQDN or IP address of the Session Border Controller service provider.
...
public interface used for Network Address Translation (NAT).

State

Panel

bgColor	#FAFAFA
borderStyle	none

Hardcoded to UDP.

...

The state to use in configuring the outbound proxy for the Provider SIP Trunk. Options include: Australia Capital Territory, New South Wales, Northern Territory, Queensland, South Australia, Tasmania, Victoria, and Other (a user-specified FQDN).

Protocol and Port

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.

Called Prefix

Panel

bgColor	#FAFAFA
borderStyle	none

Used for setting up transformation rules for the FMC service.

...

Hard coded as UDP and Port 5060.

SIP Connect DNS IP

Panel

bgColor	#FAFAFA
borderStyle	none

Address of Record of the client that is registered on the SIP server.

...

The IPv4 address used to create a Split DNS entry for the Telstra domain.

SIP Connect Domain/Realm

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies the host portion of the FQDN used in the From Header. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port

...

The SIP Connect Domain or Realm to which the specified IP address will map.

Authentication User ID (SIP Connect Authentication)

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies a user name to use in response to a challenge.

The User ID for use in authentication.

Authentication Password

Panel

bgColor	#FAFAFA
borderStyle	none

The password for the Authentication to use when authenticating with the User ID.

Confirm Password

Panel

bgColor	#FAFAFA
borderStyle	none

ReThe re-enter the entered password for the Authentication IDconfirmation.

...

Trunk Pilot Number

Panel

bgColor	#FAFAFA
borderStyle	none

IP address (IPv4 or IPv6) of the DNS server.

...

The 9-digit pilot number Telstra assigned for use with the SIP Connect trunking service.

Server Pool Host (Skype for Business)

Panel

bgColor	#FAFAFA
borderStyle	none

Domain name associated with the DNS IP address.

...

The Pool FQDN or IP Address of the Lync Server (FQDN).

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies the physical T1/E1 port used for this Signaling Group. Valid option: T1 or E1.

DS1 Ports

...

bgColor	#FAFAFA
borderStyle	none

The physical T1/E1 port number to which the PSTN line is physically connected. DS1 entries are configured with the following command buttons: Up (move a DS1 port up in the list), Down (move a DS1 port down in the list), Add (adds a DS1 port), and Remove (deletes a DS1 port).

The IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP.

Port number

Panel

bgColor	#FAFAFA
borderStyle	none

The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. Default value: 5067.

Verizon SIP Trunk - Field Definitions

These fields apply if you selected Verizon SIP Trunk in Step 1 - Select Scenario

...

.

Caption

1
0	Figure

...

Image Removed

...

	Verizon Managed Service

Image Added

Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

The FQDN or IP address of the Remote Peer service provider.

Protocol

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies the ISDN variant for the port type in the ISDN Signaling Group.

For T1

ATT 4EES
ATT 5EES
DMS 100
N12
Euro ISDN
QSIG
Japanese ISDN

For E1:

Euro ISDN
QSIG

ISDN Number Translation

The IP protocol to use for sending and receiving SIP messages between SBC and the Border Element Server. This value is fixed at UDP.

Port Number

Panel

bgColor	#FAFAFA
borderStyle	none

Determines if the Sonus SBC 1000/2000 should translate dialed PSTN digits as phone extensions. Valid options: Translation Extension (translates digits into phone extensions) or Passthrough Untranslated (does not translate digits).

...

The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.

Server Pool Host (Skype for Business)

Panel

bgColor	#FAFAFA
borderStyle	none

The numbers to prefix for the translated phone extension. This field is available only when ISDN Number Translation is set to Translation Extension.

...

Pool name of the Skype for Business / Lync Server (FQDN).

Protocol

Back to top

Panel

bgColor	#FAFAFA
borderStyle	none

The number of digits used to account for the PSTN extension. Valid options: 2, 3, 4, or 5.This field is available only when ISDN Number Translation is set to Translation Extension.

Noprint

IP protocol used for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP.

Port Number

Panel

bgColor	#FAFAFA
borderStyle	none

The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host.

Pagebreak

Step 3 - Confirm and Submit Configuration

This step displays a summary of the the configuration items from Step 1 and Step 2. Click Finish (to cancel the configuration, click Cancel).

...

width	600px

...

borderStyle	none

This example displays a SIP ↔ Microsoft UC On Premises configuration with a KDDI SIP Trunk.

...

Caption

0	Figure
1	Step 3

...

Image Added

Pagebreak

Space shortcuts

Page tree

Page History

Versions Compared

Old Version 8

New Version Current

Key

Step 1 - Select Scenario

Scenario Parameters - Field Definitions

Step 1 - Select Scenario

Scenario Parameters - Field Definitions

Application

Scenario Description

Telephone Country

Emergency Callback Number 1

Emergency Callback Number 2

PSAP Number

SIP Sessions

Name (SIP Trunk)

Version (Microsoft On Premises)

Step 2 - Configure SIP Details for Endpoint

ATT SIP Trunk - Field Definitions

Border Element Server

Protocol

Port Number

Use Secondary Border Element Server

Secondary Border Element Server

Protocol

Port Number

AT&T Simultaneous Ring Supported (AT&T Services)

AT&T IP Toll Free

PanelbgColor#FAFAFAborderStylenoneThe scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ Microsoft UC....Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled.

IP Toll Free Access Number

Server Pool Host (Skype for Business)

Emergency Services

Protocol

Port Number (Server Pool)

Emergency Callback Number 1

Emergency Callback Number 2

KDDI SIP Trunk - Field Definitions

SIP Server

Protocol

Port Number

Main Telephone Number

Called Prefix (FMC Service)

Address of Record URI

Step 2 - Configure SIP Details for Endpoint

Generic SIP Trunk - Field Definitions

Static Host (SIP Profile)

Authentication ID (Remote Authorization Entry)

Password

Confirm Password

DNS Server IP (Split DNS Table)

Domain Name

Port Number (Border Element Server)

Use Secondary Border Element Server

NTT DOCOMO Officelink- Field Definitions

Other SIP Trunk

- Field Definitions

Border Element Server

Protocol

Port Number

PanelbgColor#FAFAFAborderStylenoneThe SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.

Use Secondary Border Element Server

Secondary Border Element Server

Protocol

PanelbgColor#FAFAFAborderStylenoneThe Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

Port

Number

AT&T Forking Feature

Server Pool Host (Skype for Business)

Protocol

Port Number (Server Pool)

Server Pool Host

SoftBank White Office - Field Definitions

WAN Link

Signaling/Media Source IP

Verizon Managed Service - Field Definitions

SIP Server

Gateway ID (Remote Authorization Entry)

Panel
bgColor #FAFAFA
borderStyle none
The scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ Microsoft UC.
...
Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled.

Panel
bgColor #FAFAFA
borderStyle none
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.

Panel
bgColor #FAFAFA
borderStyle none
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

Panel
bgColor #FAFAFA
borderStyle none
The FQDN or IP address of the Session Border Controller service provider.
...
password used for authenticating with the router at the gateway of the network.

Panel
bgColor #FAFAFA
borderStyle none
The IP protocol used to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host. Valid entry: TLS or TCP.

Panel
bgColor #FAFAFA
borderStyle none
The FQDN or IP address of the Session Border Controller service provider.
...
public interface used for Network Address Translation (NAT).