Versions Compared

Old Version 7

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Add_workflow_for_techpubs
AUTH1
JIRAIDAUTHSBX-75414
REV5
REV6
REV3
REV1
 

Panel

In this section:

Table of Contents
maxLevel4

 

This section explains the prerequisites and the configurations to be done on the SBC SWe cluster and PSX Manager so that the SBC cluster has the view of the PSX cluster and the PSX has the view of the SBC cluster. To configure SBC SWe clusters as gateways in the PSX SWe Manager, refer to "Configuring SBC Cluster ID as Gateway" in the PSX documentation.  

Prerequisites

  • EMS instance is up and running
  • PSX Master instance is up and running

The PSX instances within a cluster must be visible to the instances within the SBC SWe cluster.  Registering the PSX cluster FQDN in the Remote Policy Server, instead of the IP address, allows the SBC SWe to have a view of the PSX instances within the cluster. When a new instance is created, it will query the PSX using the FQDN.

Access the SBC Configuration Manager

Excerpt Include
Address Context - LI-IPsec
Address Context - LI-IPsecConfiguring an SBC SWe Cluster using the EMSConfiguring an SBC SWe Cluster using the EMS
nopaneltrue

Disable the PSX Local Server

  1. Navigate: All > System > Policy Server > Local Server. or
    Configuration     > Policy Server > Local   Select the PSX_LOCAL_SERVER.

  2. Change the State to Disabled and Mode to Out of Service.

  3. Click Save.

    Caption
    0Figure
    1Local Server

Add a Remote Policy Server with the PSX Cluster FQDN

  1. Navigate through : All > System > Policy Server > Remote Server or
    Configuration > Policy Server > Remote Server. The following screen appears:Remote Server window opens.

    Caption
    0Figure
    1Remote Policy Server Window

  2. Click New Remote Server and add the required values, for example:

    1. Enter the Name as the cluster In Name enter a name (PSX_15).

    2. Enter the FQDN of the PSX Clustercluster, for example "psx2.sonusnetrbbn.com".

    3. Check Select the radio button for Enabled.

    4. Change the Mode to Standby.

      Caption
      0Figure
      1Remote Policy Server Values

    5. Click Save.

      Caption
      0Figure
      1Remote Policy Server List

    6. Create another Remoter Server with the following details:

      1. Name: PSX_14
      2. FQDN: psx1.sonusnetrbbn.com (example)
      3. Mode: Active

The PSX Master cluster FQDN is added to the SBC configuration.

Info
titleNote

You can configure either the FQDN or IP address, but not both.

maxPolicyServerCount is the number of IP addresses the SBC selects and registers with from the FQDN resolution result. The default value is 1.

Saving and Activating the Configuration in the Cluster

Once you have completed making configuration changes, click Apply Saved Changes and CloseClick Save at the top-right of the SBC Configuration Manager window when you have completed making configuration changes. When prompted, confirm that you want to save all and activate your changes and push the configuration to all nodes in the SBC cluster.configuration changes. The SBC Configuration Manager window closes. 

 

Pagebreak