...
Select the Signaling Group used for Microsoft Teams Direct Routing.
From the RTCP Multiplexing drop down list, select Enable.
Caption | ||||
---|---|---|---|---|
| ||||
From the ICE Support drown drop down list, select Enable.
From the ICE Mode drop down list, select Lite.
Caption | ||||
---|---|---|---|---|
| ||||
|
Note |
---|
Before configuring Outbound NAT Traversal, obtain the Public IP address for your network (the Public IP address specified in the screen graphic is an example only). |
From the NAT Public IP (Signaling/Media) drop down list, enter the Public IP Address assigned on this media port (the Public IP used in the screen is an example only; use the Public IP for your network).
Caption | ||||
---|---|---|---|---|
| ||||
Click Apply.
...
Configure the fields to be identical to the Non Bypass SIP Profile, except the FQDN in From Header and the FQDN in Contact Header are set to Static.
Info | ||
---|---|---|
| ||
If you expect the port number of the Contact header in the outbound SIP messages, you must configure the Static Host FQDN/IP field with the Listen Port number of the SIP signaling group because the FQDN in Contact Header field is set to Static. |
Available_since
Caption | ||||
---|---|---|---|---|
| ||||
|
Configure the fields identical to the Non Bypass Signaling Group, except the Listen Ports must be different.
From the RTCP Multiplexing drop down list, select Enable.
Caption | ||||
---|---|---|---|---|
| ||||
From the ICE Support drown down list, select Enable.
From the ICE Mode drop down list, select Lite.
Caption | ||||
---|---|---|---|---|
| ||||
For an SBC deployment behind a NAT only:
From the NAT Public IP (Signaling/Media) drop down list, enter the Public IP Address of the NAT device assigned on this media port (the Public IP used in the screen is an example only; use the Public IP for your network).
Caption | ||||
---|---|---|---|---|
| ||||
Click Apply.
...