...
Configuring the
for this type of deployment requires specific configuration steps to be completed in the following order:
Caption |
---|
|
Image Added |
...
Configuration Overview
The configuration process comprises the following 10 steps, each of which is explained in detail in the body of this article.
...
- In the WebUI, click on Settings.
- In the left navigation pane, go to System > Node-Level Settings.
Verify that the settings are configured correctly as indicated below.
Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | Node-Level Settings |
---|
| Image Modified |
|
SIP Server Table
- In the WebUI, click the Settings tab.
- In the left navigation pane, go to SIP > SIP Server Tables.
- Create a new IP Server Table. Click on the Create () icon.
The SIP Server Tables page is a table of SIP Server Tables.
Configure the new SIP Server Table as shown in the illustration below.
Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | Create SIP Server Table |
---|
| Image Modified |
|
- In the left navigation pane, go to SIP > SIP Server Tables > (The table you created in the previous step).
- Click the Create SIP Server > IP/FQDN.
- Enter the IP address of the eUM Server in the Host as shown below.
Click OK.
Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | Create SIP Server Entry |
---|
| Image Modified |
|
Transformation Table
- In the WebUI, click the Settings tab.
- In the left navigation pane, go to Transformation.
- Click the Create () icon.
Create a new Transformation Table.
Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | Create Transformation Table |
---|
| Image Modified |
|
- In the left navigation pane, go to Transformation >(the table created in the previous step).
Add an entry as shown below.
Panel |
---|
|
Caption |
---|
| Image RemovedImage Added |
|
Call Routing Table
- In the WebUI, click the Settings tab.
- In the left navigation pane, go to Call Routing Table.
Create two entries (Calls from ISDN, Calls to ISDN) as shown below.
Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | Create Two Entries |
---|
| Image Modified |
|
Port Configuration
- In the WebUI, click the Settings tab.
- In the left navigation pane, go to Node Interfaces > Ports.
- Click the port that you wish to connect to the physical PRI line.
Fill in the fields as shown below.
Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | Port Configuration |
---|
| Image Modified |
|
Signaling Groups
- In the WebUI, click the Settings tab.
- In the left navigation pane, go to Signaling Groups.
Click Create Signaling Group and select ISDN Signaling Group text at the top of the table.
Fill in the fields as shown below.
Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | Create ISDN Signaling Group |
---|
| Image Modified |
|
- In the WebUI, click the Settings tab.
- In the left navigation pane, go to Signaling Groups.
- Click Create Signaling Group and select SIP Signaling Group.
Fill in the fields as shown below.
Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | Create SIP Signaling Group |
---|
|
|
|
...
Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | Signaling Group Table |
---|
| Image Modified |
|
Call Routing Table Entries
- In the WebUI, click the Settings tab.
- In the left navigation pane, go to Call Routing Table > (call route entry for ISDN).
Fill in the fields as shown below.
Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | Call Route Entry for ISDN |
---|
| Image Modified |
|
- In the WebUI, click the Settings tab.
- In the left navigation pane, go to Call Routing Table > (call route entry for SIP)
Fill in the fields as shown below.
Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | Call Route Entry for SIP |
---|
| Image Modified |
|
System Timing Configuration
- In the WebUI, click the Settings tab.
- In the left navigation pane, go to System > System Timing.
Configure the Clock Source either as System or the Network, depending on your PBX timing settings.
In this exercise, the
SBC 1000/2000 node is reading the system time from the network therefore the configuration is done as shown below:
For more information about system timing see, Configuring the System Clock Source. Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | System Timing Configuration |
---|
| Image Modified |
|
Exchange 20xx UM Server Configuration Steps
...
Panel |
---|
|
Caption |
---|
| Image Modified |
|
Common Use Case
...