Parameter | Length/Range | Description |
|---|
tlsProfileNametlsProfile
| 1-23 | <name> - Name assigned to this Transport Layer Security (TLS) profile. You can create a maximum of 16 TLS Profiles.
|
acceptableCertValidationErrors | N/A | Use this parameter to specify if certificate chain validation errors are acceptable while validating the peer certificate. invalidPurpose none (default)
|
allowedRoles
| N/A | Allowed TLS roles for this TLS profile. clientandserver – (default) Choose to select both a TLS client and server role, depending on the request direction. This is primarily for peering applications.server – The will only be a TLS server. This is primarily for access applications.
|
appAuthTimer
| 1-60 | The higher layer authentication timer in seconds. (default = 5). |
authClient
| N/A | Indicates whether or not a TLS client is forced to authenticate itself within TLS. If set to false, the client is not required to authenticate itself at the TLS layer, but must complete authentication within a higher-level protocol after the TLS connection is established (that is, SIP registration). |
cipherSuite1
| N/A | Use this parameter to specify the first TLS Cipher Suite choice for this profile. See Supported Cipher Suites table below for the list of cipher suites. |
cipherSuite2
| N/A | Use this optional parameter to specify the second TLS Cipher Suite choice for this profile. See Supported Cipher Suites table below for the list of cipher suites. |
cipherSuite3
| N/A | Use this optional parameter to specify the third TLS Cipher Suite choice for this profile. See Supported Cipher Suites table below for the list of cipher suites. |
clientCertName
| 1-23 | The name of the default Client Certificate to be used by this TLS profile, created using the SECURITY PKI configuration object. |
handshakeTimer
| 1-60 | The time (in seconds) in which the TLS handshake must be completed. The timer starts when the TCP connection is established. (default = 5) |
ocspProfileName | 1-23 | Name of OCSP profile object referenced by TLS profile. |
peerNameVerify | N/A | This flag is used to verify the authenticity of a client certificate. When enabled, the validates the TLS peer name of the SIP peer against either a Common Name (CN) present in the subject or the DNS names or IP addresses in the Subject Alternate Name Extension (SAN) field in the certificate presented by the peer.For example, if the establishes a TLS session with "sonus.customer.net", this feature verifies the CN in the subject (or a DNS entry in the SAN field) of the certificate contains "sbc.customer.net" as the value.disabled (default)
enabled
NOTE: This flag is used in conjunction with the trunk group parameter, tlsPeerName, which associates the TLS peer name with a trunk group. Refer to SIP TG - Signaling - TLS Peer Name - CLI for details. |
serverCertName
| 1-23 | Specifies the name of the Server Certificate to be used by this TLS profile, created using the SECURITY PKI configuration object. |
sessionResumpTimer
| 0-86400 | The TLS session resumption period (in seconds) for which cached sessions are retained. TLS allows successive connections to be created within one TLS session (and the resumption of a session after a TLS connection is closed or after a server card failover) without repeating the entire authentication and other setup steps for each connection, except when the space must be reclaimed for a new session. (default = 3600) |
suppressEmptyFragments | N/A | Enable flag to prevent the SBC from inserting empty fragments when sending packets on TLS over TCP connection in support of older versions of TLS implementation.disabled (default)
enabled
|
v1_0 | N/A | TLS protocol version 1.0 (see note below) disabled enabled (default)
|
v1_1 | N/A | TLS protocol version 1.1 (see note below) disabled (default)
enabled
|
v1_2 | N/A | TLS protocol version 1.2 (see note below) disabled (default)
enabled
|