| CSS Stylesheet |
|---|
img.confluence-embedded-image { display: inline-block !important; } |
| Tip |
|---|
Usage of the Easy Config wizard to configure the Sonus SBC 1000/2000 does not modify existing configuration. The wizard will simply add the new configuration elements to the Sonus SBC 1000/2000. |
| Info |
|---|
SBC Easy Configuration supports IPv4 only, not IPv6. |
The Sonus SBC 1000/2000 Easy Config interface includes a built-in step-by-step setup configuration wizard, which enables end-users to quickly deploy Sonus SBC 1000/2000 in an Enterprise's Lync environment with a SIP Trunk Provider to an IP phone. The Sonus SBC 1000/2000 can be configured to use a SIP trunk to connect to IP phones using the automatic setup wizard as described in the section below.
The following SIP Trunks are supported:
- ATT&T IP Flexible Reach
- Generic SIP Trunk
- Verizon Managed Service
- KDDI SIP Trunk
- Broadsoft Trunk
| Note |
|---|
Broadsoft Trunk is applicable only if the user endpoint is an IP phone. |
Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.
Step 1 - Select Scenario
| Note |
|---|
These instructions assume the SBC Easy Config wizard is running. See Running Easy Configuration Wizard. |
Select the Application type (SIP Trunk ↔ IP Phones). Enter the scenario configuration details based on your deployment settings. Once completed, click Next to move to Step 2 (or Cancel to return to the main WebUI screen).
Scenario - Field Definitions
| Section |
|---|
| Column |
|---|
| | Panel |
|---|
| | Caption |
|---|
|  Image Removed
|
|
|
|
Application
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ IP Phones.
|
| Add_workflow_for_techpubs |
|---|
| AUTH1 | UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb41059c, userName='null'} |
|---|
| JIRAIDAUTH | SYM-27506 |
|---|
| REV5 | UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'} |
|---|
| REV6 | UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'} |
|---|
| REV3 | UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ca2f03d1, userName='null'} |
|---|
| REV1 | UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cc5207f0, userName='null'} |
|---|
|
| Tip |
|---|
Usage of the Easy Config wizard to configure the (SBC) does not modify existing configuration. The wizard will simply add the new configuration elements to the SBC. |
The SBC Easy Config interface includes a built-in step-by-step setup configuration wizard, which enables end-users to quickly deploy SBC in an Enterprise's VoIP environment with a SIP Trunk Provider to an IP phone. The SBC can be configured to use a SIP trunk to connect to IP phones using the automatic setup wizard as described in the section below.
The following SIP Trunks are supported:
- ATT SIP Trunk
- KDDI SIP Trunk
- NTT DOCOMO Officelink
- Other SIP Trunk
- SoftBank White Office
- Telstra Enterprise SIP Connect
- Verizon SIP Trunk
- Broadsoft Trunk
| Note |
|---|
NTT DOCOMO Officelink, Softbank White Office and Telstra Enterprise SIP Connect are supported in SBC Edge 1000-2000 only. |
| Note |
|---|
Broadsoft Trunk is applicable only if the user endpoint is an IP phone. |
Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.
Step 1 - Select Scenario
| Note |
|---|
These instructions assume the SBC Easy Config wizard is running. See Using the Easy Configuration Wizard. |
Select the Application type (SIP Trunk ↔ IP Phones). Enter the scenario configuration details based on your deployment settings. Once completed, click Next to move to Step 2 (or Cancel to return to the main WebUI screen).
Scenario - Field Definitions
| Caption |
|---|
|
 Image Added
|
Scenario Parameters
Application
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ IP Phones.
|
Scenario Description
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enter the name to describe the SIP Trunk ↔ IP Phone setup. | Info |
|---|
This value will be prefixed on all the SBC configuration elements created by the Setup Wizard pertaining to this deployment. |
|
Telephone Country
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The country in which the SIP Trunk ↔ IP Phones originates. |
Emergency Services
| Note |
|---|
The E911 Elin number from the "CompanyName" field configured in Lync location services is used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Setup. For more information, see Creating and Modifying Entries to Transformation Tables. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
This field defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below. Options: ELIN Identifier, E911/E112 or None. |
Emergency Callback Number 1
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services. |
Emergency Callback Number 2
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services. |
PSAP Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters. |
SIP Sessions
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Number of simultaneous SIP sessions allocated. Valid entry 1 - 960. |
SIP Trunk Fields
Name (SIP Trunk)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP trunk used for connection to the IP phones. Valid options: ATT SIP Trunk, Other SIP Trunk, Verizon SIP Trunk, KDDI SIP Trunk, Broadsoft Trunk, SoftBank White Office, and NTT DOCOMO Officelink. The SIP Trunk selected determines the field options displayed in Step 2. See Step 2 - Configure SIP Details for Endpoint. |
Broadsoft Trunk Type
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the Broadsoft Trunk Type. Valid entry: Enterprise or Access. This field is available only when the SIP Trunk type is Broadsoft Trunk. |
User Type (IP Phone Registrar)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| IP Phone Registrar. This field is fixed. |
Step 2 - Configure SIP Details for Endpoint
Enter the scenario configuration details based on your endpoint. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).
ATT SIP Trunk - Field Definitions
These fields apply if you selected AT&T SIP Trunk in Step 1 - Select Scenario.
| Caption |
|---|
|
 Image Added
|
Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The FQDN or IP address of the Remote Peer service provider. |
Protocol (Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP. |
Port Number (Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
Use Secondary Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables or disables the secondary Remote Peer service provider configured. |
Secondary Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
Protocol (Secondary Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
Port Number (Secondary Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number is used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
AT&T Simultaneous Ring Supported
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables/disables support for the AT&T Simulataneous Ring feature. Valid option: Yes or No. |
AT&T IP Toll Free
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled. |
IP Toll Free Access Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Added) icon. Enter the Network IP and Network Mask and click OK. |
| Caption |
|---|
|
 Image Added
|
KDDI SIP Trunk - Field Definitions
These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | KDDI SIP Trunk |
|---|
| 3 | KDDI SIP Trunk |
|---|
|
 Image Added
|
SIP Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The FQDN or IP address of the Session Border Controller service provider. |
Protocol
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP. |
Port Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
Main Telephone Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The main telephone number associated with the SIP trunk. |
Called Prefix (FMC Service)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Used for setting up transformation rules for the FMC service.
|
Address of Record URI (Contact Registrant Entry)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Address of Record of the client that is registered on the SIP server.
|
Static Host (SIP Profile)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Address of Static Host. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port |
Authentication ID (Remote Authorization Entry)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The user identification to use in authentication. |
Enter Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The password to use when authenticating with the user ID. |
Confirm Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Re-enter the password to use with authentication for confirmation. |
DNS Server IP (Split DNS Table)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| IP address (IPv4 or IPv6) of the DNS server. The DNS Server IP address is for an SBC 1000/2000 that uses Split DNS with a primary DNS server, secondary DNS server, and a domain-specific DNS server for resolving FQDNs as required on internal and external networks. |
Domain Name
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enter the name to describe the SIP Trunk ↔ IP Phone setup. | Info |
|---|
This value will be prefixed on all the Sonus SBC 1000/2000 configuration elements created by the Setup Wizard pertaining to this deployment. |
|
Telephone Country
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The country in which the SIP Trunk ↔ IP Phones originates. |
Emergency Services
...
| Domain name associated with the DNS IP address. |
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Add Split DNS Entry |
|---|
|
|
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan (IP Phone Registrar)
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below. Options: ELIN Identifier, E911/E112 or None. |
Emergency Callback Number 1
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. For SIP Registrar, refer to |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services. |
...
| The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services. |
PSAP Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters. |
SIP Sessions
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Number of simultaneous SIP sessions allocated. Valid entry 1 - 960. |
Name (SIP Trunk)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP trunk used for connection to the IP phones. Valid options: Generic SIP Trunk, AT&T IP Flexible Reach, Verizon Managed Service, and Broadsoft Trunk. The SIP Trunk selected determines the field options displayed in Step 2. See Step 2 - Configure SIP Details for Endpoint. |
...
| The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. |
NTT DOCOMO Officelink - Field Definitions
These fields apply if you selected NTT DOCOMO Officelink Trunk in Step 1 - Select Scenario.
| Note |
|---|
For an IP Phone as the user end point, Easy Configuration loads a generic template which follows the “National Numbering Plan” guidelines. |
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | NTT DOCOMO Officelink Trunk |
|---|
|
 Image Added |
Office Link FOMA-R
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The Host IP address of the SIP Server. |
Protocol
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the Broadsoft Trunk Type. Valid entry: Enterprise or Access. This field is available only when the SIP Trunk type is Broadsoft Trunk. |
...
| The IP protocol used for sending and receiving SIP messages between SBC and the SIP Server. Default value: UDP. |
Port
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| IP Phone Registrar. This field is fixed. |
Step 2 - Configure SIP Details for Endpoint
Enter the scenario configuration details based on your endpoint. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).
Generic SIP Trunk - Field Definitions
These fields apply if you selected Generic SIP Trunk in Step 1 - Select Scenario.
| Section |
|---|
| Column |
|---|
| | Panel |
|---|
| | Caption |
|---|
| 0 | Figure |
|---|
| 1 | Generic SIP Trunk |
|---|
| Image Removed |
|
|
|
...
| The SIP Server Port number used for sending and receiving SIP messages between the SBC and the SIP Server. Default value: 5062. |
CUG Domain Name
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The FQDN of the SIP Server. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Defines the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The FQDN or IP address of the Session Border Controller service provider. |
...
Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP. |
Port Number (Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. |
Use Secondary Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables or disables the secondary Session Border Controller service provider configured. |
...
|
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. - Network IP. IP address for the destination host or subnet in which the IP phone resides.
- Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the (  Image Added) icon. Enter the Network IP and Network Mask and click OK. |
| Caption |
|---|
|
Image Added |
Other SIP Trunk - Field Definitions
These fields apply if you selected Other SIP Trunk in Step 1 - Select Scenario.
| Caption |
|---|
|
 Image Added
|
Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
Protocol (Secondary Border Element Server)
The FQDN or IP address of the Remote Peer service provider. |
Protocol
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol used for sending and receiving SIP messages between the and the |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the Secondary Border Element Server. Valid entry : UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
Port Number
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP Server Port Number number used for sending and receiving SIP messages between Sonus SBC 1000/2000 the and the Secondary Border Element server. This field is available only when Server. Default entry: 5060. |
Use Secondary Border Element Server
...
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
...
Enables or disables the secondary Remote Peer service provider configured. |
Secondary Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Defines the number of users. Valid entry 1 - 1000. |
...
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
Protocol
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Secondary Border Element Server. Valid entry: UDP or TCP. |
Port Number (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
...
This field is available only when Use Secondary Border Element Server is Enabled. |
Port Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the (  Image Removed) icon. Enter the Network IP and Network Mask and click OK. | Caption |
|---|
| Image Removed |
|
AT&T IP Flexible Reach - Field Definitions
These fields apply if you selected AT&T IP Flexible Reach in Step 1 - Select Scenario.
| Section |
|---|
| Column |
|---|
| | Panel |
|---|
| | Caption |
|---|
| 0 | Figure |
|---|
| 1 | AT&T IP Flexible Reach |
|---|
| Image Removed
|
|
|
|
Border Element Server
The Port Number used for sending and receiving messages between the and the Secondary Border Element server. Default entry: 5060. This field is available only when Use Secondary Border Element Server is Enabled. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The FQDN or IP address of the Session Border Controller service providerDefines the number of users. Valid entry 1 - 1000. |
Protocol (
...
IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol Protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Servercommunicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (
...
IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP Server Port number Number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. |
Use Secondary Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables or disables the secondary Session Border Controller service provider configured. |
...
| and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
Protocol (Secondary Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
Port Number (Secondary Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number is used for sending and receiving messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
AT&T Forking Feature
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables/disables AT&T Forking Feature. Valid option: Yes or No. |
...
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP: IP address for the destination host or subnet in which the IP phone resides. Netmask: The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Added) icon. Enter the Network IP and Network Mask and click OK. |
| Caption |
|---|
|
Image Added |
SoftBank White Office - Field Definitions
These fields apply if you selected SoftBank White Office in Step 1 - Select Scenario.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | SoftBank White Office |
|---|
|
 Image Added
|
WAN Link
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled. |
...
The method used for connecting networks. Options are: Routerless and Router. On selection of Routerless, the Easy Config displays the Signaling/Media Source IP field and the SIP Server field. On selection of Router, the Easy Config displays the SIP Server field only. |
Signaling/Media Source IP
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled. |
...
user-specified IP address to be used for SIP signaling messages. The Signaling/Media Source IP field does not display when the option selected for the WAN Link field is Router. |
SIP Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
...
The host IP address or FQDN for the SIP server. |
Gateway ID
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define the number of users. Valid entry 1 - 1000. |
...
The ID used for authenticating with the router at the gateway of the network. |
Gateway Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol password used for communicating with the IP phone. Valid entry: UDP or TCP. |
...
authenticating with the router at the gateway of the network. |
Confirm Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
...
Re-entry of the password for the router serving as the network gateway. |
Address of Record URI
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Removed) icon. Enter the Network IP and Network Mask and click OK. |
| Panel |
|---|
|
| Caption |
|---|
| Image Removed |
|
Verizon Managed Service - Field Definitions
These fields apply if you selected Verizon Managed Service in Step 1 - Select Scenario.
| Section |
|---|
| Column |
|---|
| | Panel |
|---|
| | Caption |
|---|
| 0 | Figure |
|---|
| 1 | Verizon Managed Service |
|---|
| Image Removed |
|
|
|
...
The public address that points to the domain for users, for use in the Contact Registrant Entry. For example, specify: GatewayID@SIPServer. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Defines the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The FQDN or IP address of the Session Border Controller service provider. |
...
Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. This value is fixed at UDP. |
Port Number (Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. |
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
|
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the (Image Added) icon. Enter the Network IP and Network Mask and click OK. |
| Caption |
|---|
|
Image Added |
Telstra Enterprise SIP Connect - Field Definitions
These fields apply if you selected Telstra Enterprise SIP Connect in Step 1 - Select Scenario.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Telstra Enterprise SIP Connect Trunk |
|---|
|
 Image Added
|
NAT Public Interface
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
...
| The public interface used for Network Address Translation (NAT). |
State
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
...
state to use in configuring the outbound proxy for the Provider SIP Trunk. Options include: Australia Capital Territory, New South Wales, Northern Territory, Queensland, South Australia, Tasmania, Victoria, and Other (a user-specified FQDN). |
Protocol and Port
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Removed) icon. Enter the Network IP and Network Mask and click OK. |
| Panel |
|---|
|
| Caption |
|---|
| Image Removed |
|
KDDI SIP Trunk - Field Definitions
These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.
| Section |
|---|
| Column |
|---|
| | Panel |
|---|
| | Caption |
|---|
| 0 | Figure |
|---|
| 1 | KDDI SIP Trunk |
|---|
| 3 | KDDI SIP Trunk |
|---|
| Image Removed |
|
|
|
...
Hard coded as UDP and Port 5060. |
SIP Connect DNS IP
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IPv4 address used to create a Split DNS entry for the Telstra domain. |
SIP Connect Domain/Realm
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP Connect Domain or Realm to which the specified IP address will map. |
Authentication User ID
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The User ID for use in authentication. |
Authentication Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The password to use when authenticating with the User ID. |
Confirm Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The re-entered password for confirmation. |
Trunk Pilot Number
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The 9-digit pilot number Telstra assigned for use with the SIP Connect trunking service. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The FQDN or IP address of the Session Border Controller service providerDefines the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The IP protocol Protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number
...
(IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. |
Call Prefix
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| ??? |
...
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| ??? |
Static Host
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Address of Static Host. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port |
Authentication ID
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| ??? |
Enter Password
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| ??? |
...
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Added) icon. Enter the Network IP and Network Mask and click OK. | Caption |
|---|
| Image Added |
|
Verizon SIP Trunk - Field Definitions
These fields apply if you selected Verizon Managed Service in Step 1 - Select Scenario.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Verizon SIP Trunk |
|---|
|
 Image Added
|
Border Element Server
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| ??? |
...
The FQDN or IP address of the Remote Peer service provider. |
Protocol (Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| IP address (IPv4 or IPv6) of the DNS server. |
Domain Name
|
The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. This value is fixed at UDP. |
Port Number (Border Element Server)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
| Domain name associated with the DNS IP address.
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define Define the number of users. Valid entry 1 - 1000. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| The The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image RemovedImage Added) icon. Enter the Network IP and Network Mask and click OK. |
...
Image Added |
...
...
Broadsoft Trunk - Field Definitions
...
...
These fields apply if you selected Broadsoft Trunk in Step 1 - Select Scenario.
...
...
...
 Image Added |
Server Domain
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The FQDN of the server domain. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables/disables Enterprise Trunking. This field is available only when Enterprise Trunking is selected in the Broadsoft Trunk Type field. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define the number of users. Valid entry 1 - 1000. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in which the IP phone resides. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Removed Image Added) icon. Enter the Network IP and Network Mask and click OK. |
...
Image Added |
...
...
Back to top
Step 3 - Confirm and Submit Configuration
This steps displays a summary of the the configuration items from Step 1 and Step 2. Click Finish (to cancel the configuration, click Cancel).
...
This example displays a SIP ↔ IP Phones with a Generic SIP Trunk.
...
...
| Caption |
|---|
|
 Image Added
|
...
