Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Include Page
Services - Hpc Call Profile
Services - Hpc Call Profile

Panel

In this section:

Table of Contents
maxLevel2

Info
iconfalse

Related articles:

Children Display

 

High Probability of Completion (HPC) features comprise a set of functionalities that provide an enhanced probability of call completion to authorized Government Emergency Telecommunications Service (GETS) and Wireless Priority Service (WPS) users during network stress and/or congestion.

There are two methods in HPC call classification:

  • Early HPC classification—an HPC call is recognized based on the received SIP RPH content in the incoming INVITE or the code point in Calling Party's Category (CPC) parameter of the ISUP-MIME. For ANSI, the CPC parameter is National Security/Emergency Preparedness (NS/EP) and for ITU, the CPC parameter is International Emergency Preference Scheme (IEPS).
  • Late HPC classification—An HPC call can also be recognized by PSX during analysis of the Called Party Number.

HPC capable switches such as GSX9000 enable HPC calls to receive additional network support to increase the chances of successful call completion.

For more information on GSX9000’s GETS and WPS feature, refer to GSX documentation Support for Government Emergency Telecommunications Service and Wireless Priority Service.

SBC is enhanced to support a subset of GSX9000's HPC capabilities and the capabilities are as follows:

  • HPC call classification that is, early or late HPC classification.
  • Call Admission Control (CAC) treatment: ingress CAC for early HPC classified calls and egress CAC treatment for early and late HPC classified calls.
  • The Resource-Priority header (RPH) is used for treating and marking SIP calls as HPC calls.
  • Network Wide HPC (NW-HPC) License enforcement.
Note

To View Hpc Call Profile

On the SBC Main screen, go to Configuration > Profile Management > Category: Service Profiles > Hpc Call Profile. The Hpc Call Profile window is displayed.

Caption
0Figure
1Hpc Call Profile Window

Image Removed

To Edit Hpc Call Profile

To edit any of the created Hpc Call Profiles, click the radio button next to the specific Hpc Call Profile entry.

Caption
0Figure
1Hpc Call Profile Highlighted

Image Removed

 

The Edit Selected Hpc Call Profile window is displayed below.

Caption
0Figure
1Hpc Call Profile Edit Window

Image Removed

 

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

To Create Hpc Call Profile

To create a new Hpc Call Profile, click New Hpc Call Profile tab on the Hpc Call Profile List panel.

Caption
0Figure
1Hpc Call Profile Fields

Image Removed

The Create New Hpc Call Profile window is displayed.
Caption
0Figure
1Hpc Call Profile Create Window

Image Removed

 

The following fields are displayed:

Caption
0Table
1Hpc Call Profile parameters

Parameter

Description

NameSpecifies the name of the HPC Call Profile.
State

Specifies whether HPC Call Profile entry is enabled or disabled. The options are:

  • Disabled (default)
  • Enabled

To Copy Hpc Call Profile

To copy any of the created Hpc Call Profile and to make any minor changes, click the radio button next to the specific Hpc Call Profile entry to highlight the row.

Caption
0Figure
1Hpc Call Profile Highlighted

Image Removed

 

Click Copy Hpc Call Profile tab on the Hpc Call Profile List panel.

Caption
0Figure
1Hpc Call Profile Fields

Image Removed

 

The Copy Selected Hpc Call Profile window is displayed along with the fields which can be edited.

Caption
0Figure
1Hpc Call Profile Copy Window

Image Removed

 

The following fields are displayed:

Caption
0Table
1Hpc Call Profile parameters

Parameter

Description

NameSpecifies the name of the HPC Call Profile.
State

Specifies whether HPC Call Profile entry is enabled or disabled. The options are:

  • Disabled (default)
  • Enabled
Rph 
Ets Default ValueSpecifies the default value used for the ETS namespace. The value ranges from 0 to 4 and the default value is 0.
Use Wps Precedence

Specifies whether SBC must use ingress precedence, if available as ETS value when adding RPH header. The options are:

  • Disabled (default)
  • Enabled
Use Incoming Ets

Specifies whether SBC uses the received ETS value if available, when adding RPH and it has the highest precedence in deciding ETS value when adding RPH. The options are:

  • Disabled (default)
  • Enabled
Use Precedence

Specifies whether to use precedence Multilevel Precedence and Preemption or Wireless Priority Service (MLPP/WPS) from ingress side to be sent on egress side. The options are:

  • Disabled (default)
  • Enabled
Ets CPC Precedence

Controls the SBC behavior when it receives conflicting Emergency Telecommunications Services (ETS) (RPH and CPC (ISUP-MIME)) values. The options are:

  • Hpc (default)
  • Cpc
  • Ets
Wps Mlpp Precedence

Specifies the SBC behavior when there is a conflict between precedence derived from RPH WPS namespace and ISUP-MIME (SIP-I) MLPP values. The options are:

  • Wps
  • Mlpp (default)
Include Require

Specifies whether a Require: Resource-Priority header is included in an egress INVITE or not. The options are:

  • Disabled (default)
  • Enabled
Reject Not Ets DnIf SBC classifies a call as HPC based on received RPH and rejectNotEtsDn is enabled and if PSX determines that the dialed digits do not match the PSX's configuration for Government Emergency Number Prefix, the call will be rejected. The options are:
  • Disabled (default)
  • Enabled
Include Accept In417Specifies whether SBC includes the Accept-Resource-Priority header or not when sending a 417 response. The options are:
  • Disabled (default)
  • Enabled

Make the required changes to the fields and click Save to save the changes. The copied Hpc Call Profile entry is displayed at the bottom of the original entry in the Hpc Call Profile List panel.

To Delete Hpc Call Profile

To delete any of the created Hpc Call Profile entry, click the radio button next to the specific Hpc Call Profile entry which you want to delete.

Caption
0Figure
1Hpc Call Profile Highlighted

Image Removed

 

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Caption
0Figure
1Hpc Call Profile Delete Confirmation message

Image Removed

 

Click Yes to remove the specific Hpc Call Profile entry from the list.

...