. Info |
---|
This configuration is available when Monitor is set to SIP Options |
|
PeerUserName | No | No | string | Anonymous | 64 - Max Length | The username of SIP server. Info |
---|
This configuration is available when Monitor is set to SIP Options |
|
---|
Priority | Yes | No | int | 0 | Possible values: | Specifies the priority of this server. The priority is used to order the server when more than 1 is configured. |
---|
RemoteAuthorizationTableID | No | No | int | 0 | Possible values: - 0 - Minimum
- 65534 - Maximum
| Specifies a Remote Authorization table for this SIP Server, from a list of authorization tables defined in the Remote Authorization Tables. The Remote Authorization table is used by a Signaling group when a challenge (401/407) is issued by the server. The table contains a realm, user name, and password. There are used to provide credentials to he server issuing the challenge. |
---|
ContactRegistrantTableID | No | No | int | 0 | Possible values: - 0 - Minimum
- 65534 - Maximum
| Specifies a Contact Registration Table for this SIP Server,from a list of registration tables defined in the Contact Registrant Tables. The Contact Registration is used by a Signaling Group to register one or more contacts to a registrar. The contact information contains the SIP address of record and the methods which can be used to establish sessions to this Signaling group. |
---|
StaggerRegistration | No | No | Enum | 0 | Possible values: | If more than one Contact Registrant Entry is in Contact table, stagger Register Requests by 1 second. Applies to UnRegister also. This will only be displayed and applicble if Contact Registract Table is something other than None. |
---|
ClearRemoteRegistrationOnStartup | No | No | Enum | 0 | Possible values: | When enabled, a Register with Expires: 0 will be sent to the SIP Server on power up. After the Unregister (Expires: 0) is complete, a Register (Expires: non-zero) will then be sent. |
---|
SessionURIValidation | No | No | Enum | 0 | Possible values: - 0 - edsLiberal
- 1 - edsStrict
| Selects whether the Request URI of the incoming request needs to be validated. edsStrict ensures that the request URI is validated, edsLiberal ensures no validation is done. |
---|
ContactURIRandomizer | No | No | Enum | 0 | Possible values: | If enabled, the following will occur: -Random user values will be generated and put into the Contact-URI of each outgoing Register message. -The random user portion will be saved and compared to incoming Invite Request-Uri's. If the prefix of the R-URI contains SBCxxxx, then if there is a match, SBCxxxx will be stripped and the remaining number used to route (if no match, Invite is not accepted). If there is no SBCxxxx in R-URI, then the number is sent as-is for routing. |
---|
RetryNonStaleNonce | No | No | Enum | 1 | Possible values: | This value will only be visible if Remote Authorization Table are defined in SIP Server. When true, if stale=false is received in 401/407, the SBC will set failed retry timer and re-attempt to send Register with same credentials at expiration. When false, if stale=false is received in 401/407, the SBC will never resend a challenged request with the same credentials.(this is RFC behavior) |
---|
TLSProfileID | No | No | int | 0 | Possible values: - 0 - Minimum
- 65534 - Maximum
| If TLS is selected this specifies the TLS profile this server will use for secure SIP messages. Info |
---|
This option is available if Protocol is set to TLS. |
|
---|
AuthorizationOnRefresh | No | No | Enum | 1 | Possible values: | This value will only be visible if both Contact Registrant Table and Remote Authorization Table are defined in SIP Server. When true, the SBC will include authorization headers obtained from previous 401/407 exchange in registration refresh messages. When false, the SBC will not include authorization headers obtained from previous 401/407 exchange in registration refresh messages. |
---|