Use this window to specify SBC handling when modem tones are detected.
...
Use the Codec Entry - Modem window to configure options for a selected Codec Entry that specify how to handle modem tones when they are detected.
On the
main screen, go to Configuration > Profile Management > Category: Media Profiles > Codec Entry >...
Modem or
All > Profiles > Media > Codec Entry > Modem
The Modem window opens. Select a Codec Entry from the drop-down list to view
...
and edit its modem parameters. Be aware that not all codec entries are based on codecs that support modem parameters.
...
| Codec Entry - Modem Window |
|
 Image Modified
|
Use the following table to
...
edit modem parameters and then click Save.
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Codec Entry - Modem Parameters |
|---|
|
Parameter | Description |
|---|
Failure Handling | Specifies the behavior when a modem tone is detected but the treatment fails for any reason. The behavior can be: - Disconnect—Release the call.
- Continue (default)—Continue to process the call.
|
|
Tone Treatment | Specifies the treatment taken when modem tones are detected, which can be: - None (default)—Do nothing when modem tones are detected.
- Notify Peer—Notify the peer when modem tones are detected.
- Disconnect—Disconnect the call when modem tones are detected.
- Fallback To G711—Fall back to G.711 when modem tones are detected.
- Apply Fax Treatment—Treat the modem tone as a fax tone, and apply the fax treatment for the selected codec.
|
|
| Honor Tone Detection | Enable this option for G.711 to G.711 transcoded calls to cause the SBC to initiate a re-invite upon modem tone detection when the modem Tone Treatment configuration is Fallback To G711. When disabled, the SBC ignores the modem tone. This option only applies to a G.711 codec without silence suppression. |
|
| Info |
|---|
|
For G.711 calls, Notify Peer and Disconnect require a compression resource to be allocated. |
...