...
The firmware on the SBC as well as the firmware on the ASM (SbcComms) must be at version 5.0 or above. See Upgrading or Downgrading the SBC 1000/2000 for the upgrade procedure.
...
Note |
---|
Check the device for a Lync 2013 SBA license label. If the label is attached, no further licenses are required to operate the Lync 2013 SBA. If the label is not attached, you will need to acquire a Lync 2013 SBA license. See Working with Licenses. If a license is acquired, see Attach License Label for attaching the label on the unit. |
Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | If Factory License Is Windows Server 2008R2 |
---|
| Image Modified |
|
Case 2: Your Windows factory license is 'Windows 2012R2'
...
Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | If Factory License Is Windows 2012R2 |
---|
| Image Modified |
|
3. Confirm Availability of the Lync 2013 SBA image
...
Panel |
---|
|
Caption |
---|
| Image RemovedImage Added |
|
If Lync 2013 SBA is not listed on the drop down menu, follow the instructions on Updating the ASM Recovery Partition.
...
- Re-initializing the ASM
- Upgrading the SBC Communication Service Version
- Deploying the SBA (Survivable Branch Appliance) Preparing for SBA Deployment - First Steps
Info |
---|
|
Deploy the SBA in the same manner as Lync 2013 SBA on Windows Server 2008 R2.
|