Page History

...

Noprint

Panel

borderColor	green
bgColor	transparent
borderWidth	2

Back to Table of Contents

Back to CLI Configure Mode

Back to System - CLI

Panel

In this section:

Table of Contents

maxLevel	3

Use the admin object to configure the following system administration-related parameters in object on the

Spacevars

0	series4

system. You can configure , such as audit log state, system location, IP version usedaccount manageent, local authentication, password rules and other parameters.

Set Command

Command Syntax

Command syntax for the set command is shown below.

Code Block

title	Account Management

% set system admin <SYSTEM NAME> accountManagement
	accountAging
		accountAgingPeriod <30-180>
		state <disabled | enabled>
	bruteForceAttack
		allowAutoUnlock <disabled | enabled>
		consecutiveFailedAttemptAllowed <1-10>
		state <disabled | enabled>
		unlockTime <30-3600 seconds>
	maxSessions <1-5>
	passwordAging
		passwordAgingPeriod <30-180>
		passwordExpiryWarningPeriod <3-14> 
		state <disabled | enabled>
	sessionIdleTimeout 
		idleTimeout <1-120>
		state <disabled | enabled>

Code Block

title	Audit Log State

% set system admin <SYSTEM NAME> auditLogState <disabled | enabled>

Code Block

title	Banner

% set system admin <SYSTEM NAME> banner <system name>
	ackBanner <disable | enable>
	bannerText <text>

Code Block

title	CLI Set Warning Support

% set system admin <SYSTEM NAME> cliSetWarningSupport <disabled | enabled>

Code Block

title	Contact

% set system admin <SYSTEM NAME> contact <contact_info>

Code Block

title	DOD

% set system admin <SYSTEM NAME> dod
	cliAccess <disabled | enabled>
	mode <disabled | enabled>
	pmAccess <disabled | enabled>

Code Block

title	DSP Mismatch Action

% set system admin <SYSTEM NAME> dspMismatchAction <preserveCapacity | preserveRedundancy>

Code Block

title	External Authentication

% set system admin <SYSTEM NAME> externalAuthenticationEnabled <false | true>

Code Block

title	FIPS-140-2 Mode

% set system admin <SYSTEM NAME> fips-140-2 mode <disabled | enabled>

Code Block

title	Local Authentication

% set system admin <SYSTEM NAME> localAuthenticationEnabled <false | true>

Code Block

title	Location

% set system admin <SYSTEM NAME> location <location_info>

...

title	Password Rules

...

Code Block

title	REST State

% set system admin <SYSTEM NAME> rest state <disabled | enabled>

Code Block

title	Standby Server State

% set system admin <SYSTEM NAME> standbyServerState <disabled | enabled>

Code Block

title	Resource Monitor Stats Interval

% set system admin <SYSTEM NAME> utilMonitorStatsInterval <#>

Code Block

title	Number of Past Resource Monitor Stats

% set system admin <SYSTEM NAME> utilMonitorStatsNumOfPastInterval <#>

Noprint
Back to Top

Command Parameters

...

0	Table
1	System Admin Parameters (set)

Specifies time interval for system resource monitoring statistics. This parameter defines the range of timer interval in minutes used by configuration management for measuring the statistics of certain resources. (default = 15).

Div

class	pdf8pttext

Parameter

Length/Range

Description

admin

N/A

Use this object to specify system name.

accountManagement

N/A

Use this feature to manage system level account and password related settings. See Account Management Parameters table below for details.

auditLogState

N/A

Use this flag to specify the management audit log state.

disabled
enabled (default)

banner

1-23

Use this parameter to customize the post-login banner from EMA and CLI applications.

ackBanner – Enable flag to require user to acknowledge (accept) the banner before gaining access to the system each time the user logs into the system.
- disabled (default)
- enabled
bannerText – Use this parameter to specify the banner text to display when users login to EMA and CLI applications.

Note
"Field Service" and "Operator" user types are not allowed to change the Login Banner configuration.

cliSetWarningSupport

N/A

When this flag is enabled, warning prompts are configured for the "set" command.

disabled
enabled (default)

contact

N/A

Use parameter to specify system contact information. (default is "Unknown")

dod

N/A

Use this object to enable DoD mode, and to enable/disable CLI and/or EMA access for temporary troubleshooting and diagnostics.

cliAccess – Use this flag to temporarily enable CLI for troubleshooting and diagnostic while the SBC is in DoD mode.
- disabled (default)
- enabled
mode – Use this flag to enable/disable DoD Mode.
- disabled (default)
- enabled
pmAccess – Use this flag to temporarily enable EMA's Platform Mode for troubleshooting and diagnostic while the SBC is in DoD mode.
- disabled (default)
- enabled

Warning
Enabling CLI and/or EMA for DoD mode lowers the security posture of the SBC. Remember to disable CLI and PM access once troubleshooting and/or diagnostics is completed.

dspMismatchAction

N/A

Use this parameter to specify the action to take if a DSP mismatch is detected between the active and standby servers.

preserveCapacity – The Active
Spacevars
0 product
continues to use the extra DSP capacity, as needed, assuming appropriate session licenses are in place; partial redundancy is in effect.
Note
If a switchover occurs, calls using the extra, non-matching DSP capacity on Active are not protected during switchover (i.e. partial redundancy).
preserveRedundancy (default) – The Active automatically triggers a graceful dry-up in an attempt to align DSP hardware capabilities. Once dry-up completes, the Active SBC uses the protected, matching DSP capacity to preserve redundancy.
Note
During the dry-up period, active calls using the extra, non-matching DSP capacity are not protected in the event that a switchover occurs before the dry up completes.

externalAuthenticationEnabled

N/A

The confd CLI user information stored on remote RADIUS server is available for authentication.

false (default)
true

fips-140-2 mode

N/A

Use this object to enable FIPS-140-2 mode.

disabled (default)
enabled

Note
Once fips-140-2 mode is enabled, it cannot be 'disabled' through the configuration. A fresh software installation is required to set the FIPS-140-2 mode back to 'disabled'.

For complete details of configuring the

Spacevars

0	product

for FIPS 140-2 compliance, see Enabling SBC for FIPS 140-2 Compliance page.

localAuthenticationEnabled

N/A

The confd CLI user information stored locally is available for authentication.

false
true (default)

location

N/A

Specifies the physical location of the system.

passwordRules

N/A

The rules implementing confd user password policy.

maximumRepeatingCharsCount – Maximum number of consecutive repeating characters in the password. (range: 3-16 / default = 3).
minimumDiffWithOldPassword – The minimum differences between the old and the new passwords (range 1-8 / default - 4).
minimumLength – Minimum number of characters that should be present in the password. (range: 8-24 / default = 8)
minimumNumberOfDigits – Minimum number of digits that should be present in the password. (range: 0-16 / default = 1)
minimumNumberOfLowercaseChars – Minimum number of lower case characters that should be present in the password. (range: 0-16 / default = 1)
minimumNumberOfOtherChars –-Minimum number of non-alpha-numeric characters that should be present in the password. (range: 0-16 / default = 1)
minimumNumberOfUppercaseChars – Minimum number of upper case characters that should be present in the password. (range: 0-16 / default = 1)
passwordHistoryDepth –The number of latest passwords that should be prevented from re-use. (range: 0-10 / default = 4)

rest

N/A

Enable this flag to allow

Spacevars

0	series4

to support REST API. For REST API details, see REST API User's Guide.

disabled (default)
enabled

standbyServerState

N/A

Use this flag to manually enable or disable standby server if the active server fails.

disabled
enabled (default)

utilMonitorStatsInterval

5-60

Include Page

IntervalStatsMustMatchEMS IntervalStatsMustMatchEMS

utilMonitorStatsNumOfPastInterval

1-12

The number of past intervals that can be configured for retrieving the statistics data. (default = 4).

Noprint
Back to Top

Caption

0	Table
1	Account Management Parameters
3	Account Management Parameters

Div

class	pdf8pttext

Parameter

Length/Range

Description

accountAging

N/A

Use this parameter to enable account aging, and to specify the account expiration duration.

accountAgingPeriod – The number of days to elapse, after which the account is locked if left unused (range: 30-180 / default = 30).
state – Set flag to "enabled" to enable account aging system-wide.
- disabled
- enabled (default)

bruteForceAttack

N/A

Configuration for defense against brute force OAM password guessing attempts.

allowAutoUnlock – Enable Auto Unlock of an account blocked due to consecutive wrong password attempts.
- disabled (default)
- enabled
consecutiveFailedAttemptAllowed – Number of consecutive failed login attempts allowed before account is locked. As a safety measure, the system will not lock out the last/only active Administrator user on
Spacevars
0 product
platform. (range: 1-10 / default = 3)
Note
You must first set state to 'disabled' before changing the value of consecutiveFailedAttemptAllowed.
state – Enable/disable defense against brute force OAM password guessing attempts
- disabled (default)
- enabled
unlockTime – If allowAutoUnlock flag is enabled, this parameter specifies the time (in seconds) to elapse before a locked account automatically unlocks. (range: 30-3600 / default = 30)

bruteForceAttackOS

N/A

Use this configuration to defend against brute force attacks to Linux OS.

OSstate – Enable this flag to defend the Linux OS against brute force attacks.
- enabled
- disabled (default)
allowOSAutoUnlock – Enable this flag to automatically unlock the Linux OS account after a configurable number of seconds set by unlockOSTime parameter.
- enabled
- disabled (default)
consecutiveFailedOSAttemptAllowed – Number of consecutive failed login attempts allowed before account is locked. (range: 1-10 / default = 3)
unlockOSTime – Time interval after which the disabled Linux OS account will automatically unlock. (range: 30-5400 seconds / default = 30 seconds)

maxSessions

1-5

Maximum number of simultaneous sessions allowed per user (default = 2).

passwordAging

N/A

Password expiration related configuration.

passwordAgingPeriod – The number of days to elapse, after which a password expires (range: 30-180 / default = 90).
passwordExpiryWarningPeriod – The number of days prior to the password expiry date on which the user receives a warning to change the password (range: 3-14 / default = 12).
state – Use this flag to enable/disable password aging feature.
- disabled
- enabled (default)

sessionIdleTimeout

N/A

Session idle timeout related configuration.

- idleTimeout – The amount of idle time, in minutes, to elapse before ending a session due to inactivity (range: 1-120 / default = 10).
- state – To use this feature, set this flag to "enabled".
  - disabled
  - enabled (default)

Noprint
Back to Top

Request Command

Command syntax for the request command is shown below.

Command Syntax

Multiexcerpt

MultiExcerptName	adminRequestSyntax

Code Block

language	none

% request system admin <SYSTEM NAME>
	identify duration <0-255 seconds>
	loadConfig
		allowOldVersion <no | yes>
		filename 
	reGenerateSshRsaKeys
	reKeyConfdEncryptionKeys
	removeSavedConfig fileName <filename>
	restart
	saveConfig fileNameSuffix <suffix>
	setHaConfig
		bondMonitoring <currentValue | direct-connect | network-connect> 
		leaderElection <currentValue | enhanced | standard>
	softReset
	switchover
	verifyDatabaseIntegrity <activeAndStandbyPolicy | activeConfigAndActivePolicy | all>
	zeroizePersistenKeys

Noprint
Back to Top

Command Parameters

...

MultiExcerptName	adminRequestParameters

Caption

0	Table
1	System Admin Parameters (request)

...

class	pdf8pttext

...

Parameter

...

Description

...

identify

...

Turn on/off the locator LED of the specified server for the amount of time set with the duration sub-parameter below.

duration – The duration (in seconds) to illuminate the locator LED of specified server (range: 0-255). The LED illuminates for the specified number of seconds and then extinguishes. A duration of "0" turns off the locator LED and a duration of "255" turns on the locator LED indefinitely. If the duration is not specified, 15 seconds is set as the default value.

...

loadConfig

Load saved configuration and restart the system without rebooting the servers.

...

no
yes

...

filename – Enter the configuration file to load.

style	padding-left:1%;
id	indent

Children Display

style	h5

Pagebreak

Note
In a redundant system, using `loadConfig` restarts both CEs.

Note

If "reason Configuration file version not compatible with current software version. matrixFileNotAvailable" error is returned, the lswuMatrixSBX5000.bin/lswuMatrixSBX5000.txt file is missing from the/opt/sonus directory. You must must restore these files from the release package of the currently running software with the name pattern of "sbc-V0X.YY.ZZRQQQ.x86_64.tar.gz". Unzip and untar the current release's tar.gz file in that directory, return to the CLI and perform the command again.

...

Use this control to regenerate system configuration database encryption keys.

Note

Spacevars

0	company

recommends backing up current encrypted parameters in plaintext, if possible.

Spacevars

0	company

further recommends performing a full configuration backup immediately after this activity has successfully completed.

...

removeSavedConfig

...

Remove the saved configuration from the system.

fileName – Specify filename of configuration to remove from the system.

...

restart

...

Restart system (all CEs).

...

saveConfig

...

Save the current configuration.

fileNameSuffix – Use this parameter to specify the filename suffix to use when saving the configuration.

...

Use this action command to configure SBC for Geographical Redundancy High Availability (GRHA) mode when active and standby servers are located in two different data centers to protect SBCs against data center and network failures. To configure/change just one setting, use currentValue option for the other setting.

bondMonitoring – Select the bond monitoring type for GRHA mode.
- currentValue
- direct-connect
- network-connect
leaderElection – Select the leader election algorithm type to use for GRHA mode.
- currentValue
- enhanced
- standard

References:

Refer to SBC Redundancy for feature details.
Refer to show table system or show status system for statistics details
Refer to Enabling SBC Core Geographical Redundancy HA Mode best practice for configuration details.

...

softReset

...

Restart the applications on the system without rebooting the server(s).

...

switchover

...

Perform a switchover of the management applications and restart all applications on currently active server.

...

Use this command to verify that the

Spacevars

0	product

policy and configuration databases on the active server are in sync and that the policy databases on the active and standby servers are in sync. Because these commands take a few seconds to execute, it is not advisable to constantly run these commands on systems.

activeAndStandbyPolicy – Check if policy databases on the active and standby servers are in sync.
activeConfigAndActivePolicy – Check if the policy and configuration databases on the active server are in sync.
all – Perform both of the above checks.

To view the results of the above checks, use the 'show table system databaseIntegrity' command. See show table system for details.

...

Use this control to securely erase all persistent CSPs from the system. The

Spacevars

0	product

server reboots after confirmation.

Noprint
Back to Top

Command Examples

The following example displays system administrative information:

Code Block

language	none

% show system admin
admin sbx1 {
    auditLogState       enabled;
    dspMismatchAction   preserveRedundancy;
    passwordRules {
        minimumLength                 8;
        minimumNumberOfUppercaseChars 1;
        minimumNumberOfLowercaseChars 1;
        minimumNumberOfDigits         1;
        minimumNumberOfOtherChars     1;
        passwordHistoryDepth          4;
        maximumRepeatingCharsCount    3;
        minimumDiffWithOldPassword    4;
    }
    fips-140-2 {
        mode disabled;
    }
    dod {
        mode disabled;
    }
}

The following example turns on locator LED for 60 seconds:

Code Block

language	none

% request system admin SBC01 identify duration 60  
result success  
reason Identifying server(s)...  
[ok][2012-12-28 08:46:19]

The following example sets the Banner content to require user acknowledgement:

Code Block

language	none

% set system admin SBC01 banner ackBanner enabled bannerText "This computer system, including all related equipment and network devices (including Internet access), are provided for authorized use only"
% commit

The following example uses the Account Management feature to accomplish the following actions:

Allows a locked account to unlock after five minutes
Enables
Spacevars
0 product
to defend against brute force attacks
Sets the number of consecutive failed attempts to "3"

Code Block

language	none

% set system admin MYSBC accountManagement bruteForceAttack state enabled allowAutoUnlock enabled consecutiveFailedAttemptAllowed 3 unlockTime 300

% show system admin MYSBC accountManagement bruteForceAttack
state                           enabled;
consecutiveFailedAttemptAllowed 3;
allowAutoUnlock                 enabled;
unlockTime                      300;

To set bond monitoring type to 'network-connect' and leader election algorithm type to 'enhanced':

Code Block

language	none

% request system admin sbx1 setHaConfig bondMonitoring network-connect leaderElection enhanced

To set bond monitoring type to 'direct-connect' and retain current setting of leader election algorithm:

Code Block

language	none

% request system admin sbx1 setHaConfig bondMonitoring direct-connect leaderElection currentValue

Pagebreak

NoprintBack to Top

Space shortcuts

Page tree

Versions Compared

Old Version 5

New Version Current

Key

Set Command

Command Syntax

Command Parameters

Request Command

Command Syntax

Command Parameters

Command Examples