Page History

Anchor

	top
	top

Tip
Usage of the Easy Config wizard to configure the Sonus SBC 1000/2000 does not modify existing configuration. The wizard will simply add the new configuration elements to the Sonus SBC 1000/2000.

Info
SBC Easy Configuration supports IPv4 only, not IPv6.

The Sonus SBC 1000/2000 Easy Config interface includes a built-in step-by-step setup configuration wizard, which enables end-users to quickly deploy Sonus SBC 1000/2000 in an Enterprise's Lync environment with a SIP Trunk Provider to an IP phone. The Sonus SBC 1000/2000 can be configured to use a SIP trunk to connect to IP phones using the automatic setup wizard as described in the section below.

The following SIP Trunks are supported:

ATT&T IP Flexible Reach
Generic SIP Trunk
Verizon Managed Service
KDDI SIP Trunk
Broadsoft Trunk

Note
Broadsoft Trunk is applicable only if the user endpoint is an IP phone.

Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.

Table of Contents

maxLevel	3

Step 1 - Select Scenario

Note
These instructions assume the SBC Easy Config wizard is running. See Running Easy Configuration Wizard.

Select the Application type (SIP Trunk ↔ IP Phones). Enter the scenario configuration details based on your deployment settings. Once completed, click Next to move to Step 2 (or Cancel to return to the main WebUI screen).

Scenario - Field Definitions

Section

Column

width	600px

Panel

borderStyle	none

Caption

0	Figure
1	Step 1

Image Removed

Application

Panel

bgColor	#FAFAFA
borderStyle	none

The scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ IP Phones.

Add_workflow_for_techpubs

AUTH1	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ccb8089c, userName='null'}
JIRAIDAUTH	SYM-22206
REV5	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ccb8089c, userName='null'}
REV6	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ccb8089c, userName='null'}
REV3	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ce8a0be9, userName='null'}
REV1	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26c9da0352, userName='null'}

Tip

Usage of the Easy Config wizard to configure the

Spacevars

0	product

(SBC) does not modify existing configuration. The wizard will simply add the new configuration elements to the SBC.

The SBC Easy Config interface includes a built-in step-by-step setup configuration wizard, which enables end-users to quickly deploy SBC in an Enterprise's Lync environment with a SIP Trunk Provider to an IP phone. The SBC can be configured to use a SIP trunk to connect to IP phones using the automatic setup wizard as described in the section below.

The following SIP Trunks are supported:

ATT&T IP Flexible Reach
Generic SIP Trunk
Verizon Managed Service
KDDI SIP Trunk
Broadsoft Trunk

Note
Broadsoft Trunk is applicable only if the user endpoint is an IP phone.

Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.

Table of Contents

maxLevel	3

Step 1 - Select Scenario

Note
These instructions assume the SBC Easy Config wizard is running. See Using the Easy Configuration Wizard.

Select the Application type (SIP Trunk ↔ IP Phones). Enter the scenario configuration details based on your deployment settings. Once completed, click Next to move to Step 2 (or Cancel to return to the main WebUI screen).

Scenario - Field Definitions

Section

Column

width	600px

Panel

borderStyle	none

Caption

0	Figure
1	Step 1

Image Added

Application

Panel

bgColor	#FAFAFA
borderStyle	none

The scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ IP Phones.

Scenario Description

Panel

bgColor	#FAFAFA
borderStyle	none

Enter the name to describe the SIP Trunk ↔ IP Phone setup.

Info
This value will be prefixed on all the SBC configuration elements created by the Setup Wizard pertaining to this deployment.

Telephone Country

Panel

bgColor	#FAFAFA
borderStyle	none

The country in which the SIP Trunk ↔ IP Phones originates.

Emergency Services

Note
The E911 Elin number from the "CompanyName" field configured in Lync location services is used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Setup. For more information, see Creating and Modifying Entries to Transformation Tables.

Panel

bgColor	#FAFAFA
borderStyle	none

Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below.

Options: ELIN Identifier, E911/E112 or None.

Emergency Callback Number 1

Panel

bgColor	#FAFAFA
borderStyle	none

Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.

Emergency Callback Number 2

Panel

bgColor	#FAFAFA
borderStyle	none

Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.

PSAP Number

Panel

bgColor	#FAFAFA
borderStyle	none

Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters.

SIP Sessions

Panel

bgColor	#FAFAFA
borderStyle	none

Number of simultaneous SIP sessions allocated. Valid entry 1 - 960.

Name (SIP Trunk)

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP trunk used for connection to the IP phones. Valid options: Generic SIP Trunk, AT&T IP Flexible Reach, Verizon Managed Service, KDDI SIP Trunk and Broadsoft Trunk.

The SIP Trunk selected determines the field options displayed in Step 2. See Step 2 - Configure SIP Details for Endpoint.

Broadsoft Trunk Type

...

Panel
bgColor #FAFAFA
borderStyle none
Enter the name to describe the SIP Trunk ↔ IP Phone setup.
Info
This value will be prefixed on all the Sonus SBC 1000/2000 configuration elements created by the Setup Wizard pertaining to this deployment.
...
Defines the Broadsoft Trunk Type. Valid entry: Enterprise or Access.
This field is available only when the SIP Trunk type is Broadsoft Trunk.

User Type (IP Phone Registrar)

Panel

bgColor	#FAFAFA
borderStyle	none

The country in which the SIP Trunk ↔ IP Phones originates.

Emergency Services

Note
The E911 Elin number from the "CompanyName" field configured in Lync location services is used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Setup. For more information, see Creating and Modifying Entries to Transformation Tables.

Panel

bgColor	#FAFAFA
borderStyle	none

Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below.

Options: ELIN Identifier, E911/E112 or None.

IP Phone Registrar. This field is fixed.

Step 2 - Configure SIP Details for Endpoint

Enter the scenario configuration details based on your endpoint. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).

Generic SIP Trunk - Field Definitions

These fields apply if you selected Generic SIP Trunk in Step 1 - Select Scenario.

Section

Column

width	600px

Panel

borderStyle	none

Caption

0	Figure
1	Generic SIP Trunk

Image Added

Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

The FQDN or IP address of the Session Border Controller service provider.

Protocol (Border Element Server)

...

Panel
bgColor #FAFAFA
borderStyle none
Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.
...
borderStyle none
The IP protocol to use for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP.

Port Number (Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.

...

The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.

Use Secondary Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters.

...

Enables or disables the secondary Session Border Controller service provider configured.

Secondary Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

Number of simultaneous SIP sessions allocated. Valid entry 1 - 960.

...

Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.

Protocol (Secondary Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP trunk Protocol used for connection to the IP phonescommunicating with the Secondary Border Element Server. Valid options: Generic SIP Trunk, AT&T IP Flexible Reach, Verizon Managed Service, and Broadsoft Trunk.

The SIP Trunk selected determines the field options displayed in Step 2. See Step 2 - Configure SIP Details for Endpoint.

...

entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

Port Number (Secondary Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

Defines the Broadsoft Trunk Type. Valid entry: Enterprise or Access.

The Port Number used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when the SIP Trunk type is Broadsoft Trunk.

...

Use Secondary Border Element Server is Enabled.

IP Phone Numbering Plan

Panel

bgColor	#FAFAFA
borderStyle	none

IP Phone Registrar. This field is fixed.

Noprint
Back to top

Step 2 - Configure SIP Details for Endpoint

Enter the scenario configuration details based on your endpoint. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).

Generic SIP Trunk - Field Definitions

These fields apply if you selected Generic SIP Trunk in Step 1 - Select Scenario.

Section

Column

width	600px

Panel

borderStyle	none

Caption

0	Figure
1	Generic SIP Trunk

Image Removed

Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.

Number of Users

Panel

bgColor	#FAFAFA
borderStyle	none

Defines the number of users. Valid entry 1 - 1000.

Protocol (IP Phone)

Panel

bgColor	#FAFAFA
borderStyle	none

The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.

Port Number (IP Phone)

Panel

bgColor	#FAFAFA
borderStyle	none

The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.

IP Phone Network Addresses

...

Panel
bgColor #FAFAFA
borderStyle none
The FQDN or IP address of the Session Border Controller service provider.

Protocol (Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol to use for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP.

Port Number (Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.

Use Secondary Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

Enables or disables the secondary Session Border Controller service provider configured.

...


borderStyle	none

Configure a network address and Netmask for the host or subnet in in which the IP phones reside.

Network IP. IP address for the destination host or subnet in which the IP phone resides.

Netmask. The network mask of the destination host or subnet in which the IP phones resides.

To create a network address, click the ( Image Added) icon. Enter the Network IP and Network Mask and click OK.

Caption

0	Figure
1	Add Network/Mask

Image Added

AT&T IP Flexible Reach - Field Definitions

These fields apply if you selected AT&T IP Flexible Reach in Step 1 - Select Scenario.

Section

Column

width	600px

Panel

borderStyle	none

Caption

0	Figure
1	AT&T IP Flexible Reach

Image Added

Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is EnabledThe FQDN or IP address of the Session Border Controller service provider.

Protocol (

...

Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

The Protocol IP protocol used for communicating with the Secondary sending and receiving SIP messages between SBC and the Border Element Server. Valid entry : UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

Port Number (

...

Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP Server Port Number number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Server.

Use Secondary Border

...

Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.

...

Enables or disables the secondary Session Border Controller service provider configured.

Secondary Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

Defines the number of users. Valid entry 1 - 1000

Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.

Protocol (

...

Secondary Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

The Protocol used for communicating with the IP phone. Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

Port Number (

...

Secondary Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

The Port Number is used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060.

...

Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.

AT&T Forking Feature

Panel

bgColor	#FAFAFA
borderStyle	none

Configure a network address and Netmask for the host or subnet in in which the IP phones reside.

Network IP. IP address for the destination host or subnet in which the IP phone resides.

Netmask. The network mask of the destination host or subnet in which the IP phones resides.

To create a network address, click the ( Image Removed) icon. Enter the Network IP and Network Mask and click OK.

Caption

0	Figure
1	Add Network/Mask

Image Removed

Noprint
Back to top

AT&T IP Flexible Reach - Field Definitions

These fields apply if you selected AT&T IP Flexible Reach in Step 1 - Select Scenario.

Section

Column

width	600px

Panel

borderStyle	none

Caption

0	Figure
1	AT&T IP Flexible Reach

Image Removed

Enables/disables AT&T Forking Feature. Valid option: Yes or No.

AT&T IP Toll Free

Panel

bgColor	#FAFAFA
borderStyle	none

Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled.

IP Toll Free Access Number

Panel

bgColor	#FAFAFA
borderStyle	none

The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled.

IP Phone Numbering Plan

Panel

bgColor	#FAFAFA
borderStyle	none

Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.

Number of Users

Panel

bgColor	#FAFAFA
borderStyle	none

Define the number of users. Valid entry 1 - 1000.

Protocol (IP Phone)

Panel

bgColor	#FAFAFA
borderStyle	none

The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.

Port Number (IP Phone)

...

Panel
bgColor #FAFAFA
borderStyle none
The FQDN or IP address of the Session Border Controller service provider.
...
Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.

IP Phone Network Addresses

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP.

Port Number (Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.

Use Secondary Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

Enables or disables the secondary Session Border Controller service provider configured.

Secondary Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.

Protocol (Secondary Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.

Port Number (Secondary Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

The Port Number is used for sending and receiving messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.

AT&T Forking Feature

Configure a network address and Netmask for the host or subnet in which the IP phone resides.

Network IP. IP address for the destination host or subnet in which the IP phone resides.

Netmask. The network mask of the destination host or subnet in which the IP phones resides.

To create a network address, click the ( Image Added) icon. Enter the Network IP and Network Mask and click OK.

Panel

borderStyle	none

Caption

0	Figure
1	Add Network/Mask

Image Added

Pagebreak

Verizon Managed Service - Field Definitions

These fields apply if you selected Verizon Managed Service in Step 1 - Select Scenario.

Section

Column

width	600px

Panel

borderStyle	none

Caption

0	Figure
1	Verizon Managed Service

Image Added

Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

Enables/disables AT&T Forking Feature. Valid option: Yes or No.

...

The FQDN or IP address of the Session Border Controller service provider.

Protocol (Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled.

...

The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. This value is fixed at UDP.

Port Number (Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

The Toll Free Access Number to use when the AT&T IP Toll Free option is enabledSIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.

IP Phone Numbering Plan

Panel

bgColor	#FAFAFA
borderStyle	none

Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.

Number of Users

Panel

bgColor	#FAFAFA
borderStyle	none

Define the number of users. Valid entry 1 - 1000.

Protocol (IP Phone)

Panel

bgColor	#FAFAFA
borderStyle	none

The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.

Port Number (IP Phone)

Panel

bgColor	#FAFAFA
borderStyle	none

The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060.

IP Phone Network

...

Addresses

Panel

bgColor	#FAFAFA
borderStyle	none

Configure a network address and Netmask for the host or subnet in which the IP phone resides.

Network IP. IP address for the destination host or subnet in which the IP phone resides.

Netmask. The network mask of the destination host or subnet in which the IP phones resides.

To create a network address, click the (

...

Image Added) icon. Enter the Network IP

...

Panel

borderStyle	none

Caption

0	Figure
1	Add Network/Mask

Image Removed

Noprint
Back to top

Verizon Managed Service - Field Definitions

These fields apply if you selected Verizon Managed Service in Step 1 - Select Scenario.

600px

and Network Mask and click OK.

Section

Column
width

Panel

borderStyle	none

Caption

0

Figure

1

Verizon Managed Service

Image Removed

Border Element Server

Panel

bgColor	#FAFAFA
borderStyle	none

The FQDN or IP address of the Session Border Controller service provider.

Protocol (Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. This value is fixed at UDP.

Port Number (Border Element Server)

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.

IP Phone Numbering Plan

Panel

bgColor	#FAFAFA
borderStyle	none

Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.

	Figure
1	Add Network/Mask

Image Added

Pagebreak

KDDI SIP Trunk - Field Definitions

These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.

Section

Column

width	600px

Panel

borderStyle	none

Caption

0	Figure
1	KDDI SIP Trunk
3	KDDI SIP Trunk

Image Added

SIP Server

...

Panel
bgColor #FAFAFA
borderStyle none
Define the number of users. Valid entry 1 - 1000 The FQDN or IP address of the Session Border Controller service provider.

Protocol

...

Panel
bgColor #FAFAFA
borderStyle none
The Protocol IP protocol used for communicating with the IP phone. Valid entry: sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP.
...

Port Number

Panel

bgColor	#FAFAFA
borderStyle	none

The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.

Called Prefix

Panel

bgColor	#FAFAFA
borderStyle	none

The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060.

IP Phone Network Addresses

Configure a network address and Netmask for the host or subnet in which the IP phone resides.

Network IP. IP address for the destination host or subnet in which the IP phone resides.

Netmask. The network mask of the destination host or subnet in which the IP phones resides.

To create a network address, click the ( Image Removed) icon. Enter the Network IP and Network Mask and click OK.

Panel

borderStyle	none

Caption

0	Figure
1	Add Network/Mask

Image Removed

Noprint
Back to top

KDDI SIP Trunk - Field Definitions

These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.

Figure : KDDI SIP Trunk

Image Removed

SIP Server

Panel
The FQDN or IP address of the Session Border Controller service provider.

Protocol

Panel
The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. Valid entry UDP or TCP.

Port Number

Panel
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server.

Call Prefix

Panel

Address of Record URI

Panel

Static Host

Panel

Authentication ID

Panel

Password

Panel

Confirm Password

Panel

DNS Server IP

Panel

Domain Name

Panel

Server Pool Host

Panel
The Pool name of the Lync Server (FQDN).

Protocol

Panel
The IP protocol used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host. Valid entry: TLS or TCP.

Port Number (Server Pool)

Panel
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Server Pool Host.

...

Used for setting up transformation rules for the FMC service.

Address of Record URI

Panel

bgColor	#FAFAFA
borderStyle	none

Address of Record of the client that is registered on the SIP server.

Static Host

Panel

bgColor	#FAFAFA
borderStyle	none

Address of Static Host. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port

Authentication ID

Panel

bgColor	#FAFAFA
borderStyle	none

Specifies a user name to use in response to a challenge.

Enter Password

Panel

bgColor	#FAFAFA
borderStyle	none

The password for the Authentication ID.

Confirm Password

Panel

bgColor	#FAFAFA
borderStyle	none

Re-enter the password for the Authentication ID.

DNS Server IP

Panel

bgColor	#FAFAFA
borderStyle	none

IP address (IPv4 or IPv6) of the DNS server.

Domain Name

Panel

bgColor	#FAFAFA
borderStyle	none

Domain name associated with the DNS IP address.

IP Phone Numbering Plan

Panel

bgColor	#FAFAFA
borderStyle	none

Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.

Number of Users

Panel

bgColor	#FAFAFA
borderStyle	none

Define the number of users. Valid entry 1 - 1000.

Protocol (IP Phone)

Panel

bgColor	#FAFAFA
borderStyle	none

The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.

Port Number (IP Phone)

Panel

bgColor	#FAFAFA
borderStyle	none

The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.

IP Phone Network Addresses

Panel

bgColor	#FAFAFA
borderStyle	none

Configure a network address and Netmask for the host or subnet in which the IP phone resides.

Network IP. IP address for the destination host or subnet in which the IP phone resides.

Netmask. The network mask of the destination host or subnet in which the IP phones resides.

To create a network address, click the ( Image Added) icon. Enter the Network IP and Network Mask and click OK.

Caption

0	Figure
1	Add Network/Mask

Image Added

Pagebreak

...

Broadsoft Trunk - Field Definitions

...

Section

Column

width	600px

Panel

borderStyle	none

Caption

0	Figure
1	Broadsoft Trunk

Image RemovedImage Added

Server Domain

Panel

bgColor	#FAFAFA
borderStyle	none

The FQDN of the server domain.

...

Panel

bgColor	#FAFAFA
borderStyle	none

Enables/disables Enterprise Trunking. This field is available only when Enterprise Trunking is selected in the Broadsoft Trunk Type field.

IP Phone Numbering Plan

Panel

bgColor	#FAFAFA
borderStyle	none

Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.

Number of Users

Panel

bgColor	#FAFAFA
borderStyle	none

Define the number of users. Valid entry 1 - 1000.

Protocol (IP Phone)

Panel

bgColor	#FAFAFA
borderStyle	none

The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.

Port Number (IP Phone)

Panel

bgColor	#FAFAFA
borderStyle	none

The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060.

IP Phone Network Addresses

Back to top

Panel

bgColor	#FAFAFA
borderStyle	none

Configure a network address and Netmask for the host or subnet in which the IP phone resides.

Network IP. IP address for the destination host or subnet in which the IP phone resides.

Netmask. The network mask of the destination host or subnet in which the IP phones resides.

To create a network address, click the ( Image Removed Image Added) icon. Enter the Network IP and Network Mask and click OK.

Caption

0	Figure
1	Add Network/Mask

Image Removed

Noprint

Image Added

Pagebreak

Step 3 - Confirm and Submit Configuration

...

Section

Column

width	600px

Panel

borderStyle	none

Image Removed

Caption

0	Figure
1	Step 3

Image Added

Pagebreak

Space shortcuts

Page tree

Page History

Versions Compared

Old Version 4

New Version Current

Key

Step 1 - Select Scenario

Scenario - Field Definitions

Application

Step 1 - Select Scenario

Scenario - Field Definitions

Application

Scenario Description

Telephone Country

Emergency Services

Emergency Callback Number 1

Emergency Callback Number 2

PSAP Number

SIP Sessions

Name (SIP Trunk)

Broadsoft Trunk Type

User Type (IP Phone Registrar)

Emergency Services

Step 2 - Configure SIP Details for Endpoint

Generic SIP Trunk - Field Definitions

Border Element Server

Protocol (Border Element Server)

Port Number (Border Element Server)

Use Secondary Border Element Server

Secondary Border Element Server

Protocol (Secondary Border Element Server)

Port Number (Secondary Border Element Server)

IP Phone Numbering Plan

Step 2 - Configure SIP Details for Endpoint

Generic SIP Trunk - Field Definitions

Number of Users

Protocol (IP Phone)

Port Number (IP Phone)

IP Phone Network Addresses

PanelbgColor#FAFAFAborderStylenoneThe FQDN or IP address of the Session Border Controller service provider.

Protocol (Border Element Server)

Port Number (Border Element Server)

Use Secondary Border Element Server

AT&T IP Flexible Reach - Field Definitions

Border Element Server

Protocol (

Border Element Server)

Port Number (

Border Element Server)

Use Secondary Border

Element Server

Secondary Border Element Server

Protocol (

Secondary Border Element Server)

Port Number (

Secondary Border Element Server)

AT&T Forking Feature

AT&T IP Flexible Reach - Field Definitions

AT&T IP Toll Free

IP Toll Free Access Number

IP Phone Numbering Plan

Number of Users

Protocol (IP Phone)

Port Number (IP Phone)

PanelbgColor#FAFAFAborderStylenoneThe FQDN or IP address of the Session Border Controller service provider....Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.

IP Phone Network Addresses

Port Number (Border Element Server)

Use Secondary Border Element Server

Secondary Border Element Server

Protocol (Secondary Border Element Server)

Port Number (Secondary Border Element Server)

AT&T Forking Feature

Verizon Managed Service - Field Definitions

Border Element Server

Protocol (Border Element Server)

Port Number (Border Element Server)

IP Phone Numbering Plan

Number of Users

Protocol (IP Phone)

Panel
bgColor #FAFAFA
borderStyle none
The FQDN or IP address of the Session Border Controller service provider.

Panel
bgColor #FAFAFA
borderStyle none
The FQDN or IP address of the Session Border Controller service provider.
...
Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.

Panel
bgColor #FAFAFA
borderStyle none
Define the number of users. Valid entry 1 - 1000 The FQDN or IP address of the Session Border Controller service provider.

Panel
bgColor #FAFAFA
borderStyle none
The Protocol IP protocol used for communicating with the IP phone. Valid entry: sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP.
...