Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Add_workflow_for_techpubs
AUTH1UserResourceIdentifier{userKey=8a00a0c87e188912017e4c24a00e0016, userName='null'}
JIRAIDAUTHSBX-129976
REV5UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cd5909df, userName='null'}
REV6UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cd5909df, userName='null'}
REV3UserResourceIdentifier{userKey=8a00a0c85c46b657015d40f792c70014, userName='null'}
REV4UserResourceIdentifier{userKey=8a00a0c863e7fa350164008cd796001e, userName='null'}
REV1UserResourceIdentifier{userKey=2c909b3082500ff4018285cda0df001f, userName='null'}


Internal_display_only
serverRibbon JIRA
columnIdsissuekey,summary,issuetype,created,updated,duedate,assignee,reporter,priority,status,resolution
columnskey,summary,type,created,updated,due,assignee,reporter,priority,status,resolution
serverIdd45d42c2-4546-3f1b-bbde-ff79196e8c48
keySBX-127169


Include Page
_EMS in EMA, CLI, API
_EMS in EMA, CLI, API


Panel

In this section:

Table of Contents
maxLevel2


Include Page
_SBC 5100 5200 Unsupported
_SBC 5100 5200 Unsupported

Include Page
_Call_Stats_Terms
_Call_Stats_Terms

Excerpt Include
Resource Monitoring and Statistics
Resource Monitoring and Statistics
nopaneltrue

Include Page
_Interval Stats Must Match RAMP
_Interval Stats Must Match RAMP

System

Command Syntax

The command syntax of the objects related to the show table systemcommand is shown below.

Code Block
languagenone
show table system
	activeConfigFile
    activeRevision
	admin
	announcements
	baseMacAddress
	bfdSessionStats
	clusterAdmin
    configMode
	congestion
	coredumpList
	coredumpSummary
	cpuTranscodeStatus
    cpuUtilCurrentStatistics
	cpuUtilIntervalStatistics
	databaseIntegrity
	daughterBoardAdmin 
	daughterBoardStatus
	dodModeStatus
	dsbc
	dspPad
	dspRes
	dspStatus
    ems
	ethernetPort
	fanStatus
	fileStatisticsAdmin
	fileStatisticsStatus
	fipsFSMState
	gpuStatus
    gpuTranscodeStatus
    haConfig
	hardDiskStatus
	hardDiskUsage
	highAvailabilityPort
	intervalStatistics
	ipPolicing
    isOAM
	jsrcServer
	ledStatus
    licenseDomainBundleInfo
	licenseInfo
	licenseNodeLockedBundleInfo
	licenseRequired
	licenseStatus
	loadBalancingService
	logicalMgmtIpInterface
	logicalMgmtIpInterfaceStatus
	macAddressStatus
	media
	mediaProfile
	memoryUtilCurrentStatistics
	memoryUtilIntervalStatistics
	metavariable
    metaVariableDynamic
	mgmtIpInterfaceGroup
	mgmtStaticRoute
	networkProcessorStatistics
    networkSegmentTable
    niceLicense
	ntp
	objectStoreParameters
	pathCheckPath
    pdcsLicense
	policyServer
	powerSupplyStatus
	rgStatus
	savedConfigList
    sbcliLicense
	sbcPersonalityStatus
	security
	serverAdmin
	serverSoftwareUpgradeStatus
	serverStatus
    serviceDiscovery
	slb
	softwareUpgradeDetailedStatus
	softwareUpgradeStatus
	standbySyncStatus
	sweActiveProfile
	sweCapacityEstimate
	sweCodecMixProfile
	sweConfigProfileSelection
    sweProcessorCapacity
	sweTrafficProfiles
	syncStatus
	systemCongestionCurrentStatistics
	systemCongestionIntervalStatistics
	systemCongestionStatus
    transcodeInfo
    transcodeType

Command Parameters

Multiexcerpt
MultiExcerptNameSystem Parameters

Shared Common Parameters - 'show status system' and 'show table system'

Parameter

Description

activeConfigFileDisplays the file name of the last retrieved file from the external object store service.
activeRevision

Numeric identifier for the active configuration revision level. (SBC SWe N:1 HA deployments only) The revision number is incremented when executing the saveAndActivate action or restoring a cluster configuration.

CAUTION: In certain scenarios, a managed node is unable to apply changes due to unexpected configuration conflicts or network error conditions. Such situations trigger a sonusSbxManagedNodeUnableToReceiveConfigUpdates alarm and set the activeRevision number for the node to “-1.” When a node is in a “-1” state, some operations may be prevented until the situation resolves. Recovery requires a reboot of the impacted node. However, a reboot can be service impacting, proceed with caution.

admin

Basic configuration (name, location, etc) for the system. See Admin Attributes table below for details.

announcements

Announcement file status and statistics. See Announcements Attributes table below for details.

baseMacAddress

Displays base MAC address of servers.

  • activeBaseAddress – The base MAC address assigned to the active server.
  • assignedBaseAddress – The base MAC address assigned to this server.
bfdSessionStats

Displays the status of the active BFD sessions.

  • sessionId -The session ID to display the unique session.
  • activeDesiredMinTx - The minimum interval to transmit the packets (PKTs).
  • addrCntxtId - The address context ID for the BFD session.
  • connectType - The connection type for the BFD session, which is either multi-hop (indirect) or single-hop (direct).
  • creationTime - The session creation time.
  • detectTime - The timeout for the session.
  • downLastTime - The down time for the session.
  • dscp - The DSCP value for the BFD session.
  • lifGroupId - The LIF group for the BFD session.
  • linkId - The link detection ID.
  • localDiag - The diagnostic field for the BFD session.
  • localDiscr - The local discriminator for the BFD session.
  • localIP - The local IP address for the BFD session.
  • localPort - The local port for the BFD session.
  • remoteDiscr - The remote discriminator for the BFD session.
  • remoteIP - The remote IP address for the BFD session.
  • remoteMinRxInterval - The minimum interval to receive the PKT.
  • remotePort - The remote port for the BFD session.
  • rxPktCount - The total received packets for the BFD session.
  • sessionState - The session state for the BFD session.
  • txPktCount - The total transmitted packets for the BFD session.
  • upLastTime - The up time for the session.
clusterAdmin

Displays cluster-specific configuration details.

  • mgmtInterfaceGroup – The Management Interface Group used for intra-cluster communication
  • mgmtIpAddress – The management IP address used for intra-cluster communication
  • type – The interface type used during intra-cluster communication
configMode

Indicates the configuration mode for the node.

  • oam - an OAM node in a cluster that uses the OAM configuration type.
  • managed-vm - a node, managed by an OAM node, in a cluster that uses the OAM configuration type.
  • direct-single - a node in a cluster that uses the Direct Single configuration type.
  • sbc - a non-clustered node such as a hardware-based SBC.

congestion

System congestion profile for the node.

  • adaptive – adaptive overload configuration.
  • levelMC1 – Configuration for congestion level MC1.
  • levelMC2 – Configuration for congestion level MC2.
  • levelMC3 – Configuration for congestion level MC3.
  • mode – Mode (static or adaptive) of the system overload control.
  • policer – System congestion Call Rate Policer configuration.

coredumpList

List of core dumps on the server(s). Fields include:

  • coredumpFileName
  • size
  • dateAndTime
  • newSinceLastStart (true/false)

coredumpSummary

Summary of core dump files on server(s).

  • <server name> – The name of the server.
  • coredumpAndTraceCount – Number of coredumps and trace files.
  • totalSize – Indicates the total size of the coredumps (KBytes).
cpuTranscodeStatus

Available only on SWe except S-SBC SWe. See CPU Transcode Status for details.

cpuUtilCurrentStatistics

The CPU utilization of the server for the current period.

  • <server name> – The name of the server.
  • average – The average CPU % utilization for this interval.
  • high – The high CPU % utilization for this interval.
  • low – The low CPU % utilization for this interval.

cpuUtilIntervalStatistics

The CPU utilization for the 'n' number of intervals.

  • number – The interval sequence number. The number of intervals to store are configurable. (Refer to Interval Statistics - CLI for status/statistics details)
  • ceName – The SBC server name.
  • cpu – The CPU number.
  • intervalValid – A setting of 'true' indicates the interval contains valid data during the time interval. Each interval is for a configurable fixed time (default interval is 15 minutes) starting on the hour. For example, if the system starts at 12:05, the first interval at 12:15 will not be valid because it is less than the 15-minute interval. Subsequent intervals will be valid upon meeting the 15-minute time interval. System switch-overs also cause invalid intervals because data is lost during the interval.
  • time – The system up time when the interval statistics are collected.
  • average – The average CPU % utilization for this interval.
  • high – The high CPU % utilization for this interval.
  • low – The low CPU % utilization for this interval.
databaseIntegrity

Displays SBC database sync status from executing the request system admin <system name> verifyDatabaseIntegrity command. (Refer to Admin - CLI)

The following command options are available to match the results of the 'show' command with the associated 'request' command:

activeAndStandbyPolicy – Display results of the sync check against policy databases on the active and standby servers.
activeConfigAndActivePolicy – Displays the results of the sync check against the policy and configuration databases on the active server.

Displayed results include the following fields:

  • syncModuleName – The database sync module name: activeAndStandbyPolicy, activeConfigAndActivePolicy
  • syncStatus – Possible results: inProgress, inSync, outOfSync, unknown.
  • timeStamp – Times tamp of when the command was executed.

daughterBoardAdmin

SBC 7000 daughter board administrative status from server/CE level.

  • ceName – The SBC server name.
  • disableCleanupAction – Identifies the type of disable cleanup action (forced/graceful)
  • dryUpTime – The set time, in minutes, for a graceful shutdown to occur (range: 0-60 / default = 10).
  • slot – Slot number designation for DSP20 (slot 1) and DSP25 (slots 1-4) cards.
  • state – Administrative state of daughter board.

NOTE: Not applicable for 5x00 or SWe systems.

daughterBoardStatus

Server Daughter Board (DB) status details. See Daughter Board Status Attributes table below for details.

dodModeStatus

DoD mode status details, with following details:

  • index – Index number
  • status – Specifies if DoD mode is enabled/disabled, as well as if CLI, EMA Platform Mode and sFTP are enabled for access while SBC is in DoD mode.
dsbc

Distributed SBC (D-SBC) statistics details.

  • dsbcSigPortStatisticsD-SBC signaling port statistics when communicating with the other D-SBC nodes. Fields include:
    • <IP address> – The IP address of the remote node
    • BytesReceivedThe total number of signaling bytes received from this remote node
    • BytesSentThe total number of signaling bytes sent to this remote node
    • Interface – The interface used for this link
    • PdusReceived – The total number of signaling PDUs received from the remote node
    • PdusSentThe total number of signaling PDUs sent to the remote node
    • StateThe current state of the signaling link of the remote node
  • dsbcSigPortStatus – D-SBC signaling port status details.
    • <index> – The D-SBC signaling port index.
    • state – The administrative state of the D-SBC signaling port.

dspPad

DSP PAD configuration service (must be restarted for new configuration to take effect). See DSP PAD Attributes table for details (for 'show table system' command only).

dspRes

DSP historical interval statistics. See DSP Resources Attributes table below for parameter details.

  • dspCallCurrentStatistics – The System Call DSP Resource Current table.
  • dspCallIntervalStatistics – The System Call DSP Resource Interval table.
  • dspUsageCurrentStatistics – The DSP Resource Current table.
  • dspUsageIntervalStatistics – The DSP Resource Interval table.

dspStatus dspUsage

Status of DSP resources. See DSP Status Attributes table below for details.

ems

EMS-specific configuration.

  • emsFqdn – the FQDN ofthe EMS to use for registration
  • emsIpAddress – the IP address of the EMS the SBC is currently registered with.
  • emsIpAddressOverride – list of IP addresses (up to 8) to use to override any other configuration that speciftes the EMS to register with.

Applies to SBC SWe systems only.

ethernetPort

Configuration for management, packet, and field service Ethernet ports. See Ethernet Port Attributes table for details.

fanStatus

Fan status on the server(s).

  • <system name>
  • <fan nomenclature>
  • speed
fileStatisticsAdmin

Displays whether the following interval statistics are enabled/disabled to write data to the statistics file.

  • CallFailIntervalStats
  • CallIntervalStats
  • DiamNodeRfIntervalStatistics
  • DnsGroupDnsServerStats
  • DspResDspCallIntervalStats
  • DspResDspUsageIntervalStats
  • H323SigPortStatisticsStats
  • IpAclOverallStats
  • IpAclRuleStats
  • IpPolicingSystemIntStats
  • LinkDetectionGroupStats
  • LinkMonitorStats
  • MtrmConnPortPeerStats
  • NBS5200TrunkGroupStatusStats
    NOTE: The EMS uses "SBC7KTrunkGroupStatusStats" for SBC 7000 series statistics.

  • SipIntervalStats
  • sipOcsCallIntervalStatistics
  • SipRegCountStats
  • SipSigPortStatisticsStats
  • SipSubCountStats
  • SysCpuUtilIntStatsSts
  • SysMemoryUtilIntStatsSts
  • SystemCongestionIntervalStats
  • TrafficControlStats
  • ZoneIntervalStatisticsStats

fileStatisticsStatus

Displays the current ID of the last performance statistics data written to the database.
fipsFSMState

FIPS finite state machine state.

  • issuer – FIPS FSM Issuer.
  • message – FIPS FSM message.
  • state – FIPS FSM state.
  • timeStamp – FIPS FSM timestamp.
gpuStatus

SWE only. Returns server name and GPU number for each attached GPU. See GPU Status table for details.

gpuTranscodeStatus

Returns GPU codec channel capacities. Available only on SBC SWe except S-SBC SWe. See GPU Transcode Status for details. 

haConfig

This statistic displays GRHA status details.

  • serverName
  • leaderElection – The current GRHA mode setting for the leader election algorithm type.
  • bondMonitoring – The current GRHA mode setting for bond monitoring type.

hardDiskStatus

Hard disk status on the server(s).

  • capacity – Capacity of the disk.
  • diskLifeRemaining – A calculated percentage estimating the life remaining of the device or N/A if not supported by the device.
  • diskStatus – Hard disk status that indicates if the disk is online/failed.
  • healthTest – Pass or Fail indicating the overall health of the device.
  • present – Indicates if the hard disk exists (true/false).
  • productId – Product ID of the hard disk as assigned by vendor.
  • revision – Revision of the hard disk as assigned by vendor  .

hardDiskUsage

Hard disk usage on the server(s).

  • freeDiskSpace – Indicates free hard disk space (KBytes).
  • role – Role of the server for the indicated partition (see Note below).
  • syncCompletion – Indicates partition's sync completion percentage.
  • syncStatus – Partition's synchronization status with peer server.
  • totalDiskSpace – Capacity of the disk (KBytes).
  • usedDiskSpace – Indicates used hard disk (%) .

NOTE: The role of the standby server is reflected as Primary for the root partition because the other partition, /var/log/sonus/sbx/evlog is not mirrored/mounted in the standby CE until a switch-over occurs and the Standby assumes the role of active.

highAvailabilityPort

Configuration and status for the HA ethernet ports.

  • statistics – Lists status/statistics details such as port name, number of packets transmitted/received, bytes transmitted/received, and errors transmitted/received.
    • <host name> – SBC host name.
    • allocRxBufFailRx – The number of receive buffer allocation errors.
    • byteRx – The number of bytes received.
    • byteTx – The number of bytes transmitted.
    • crcErrRx – The number of receive CRC errors.
    • errTx – The number of transmit errors.
    • noBufCntRx – The number of receive no buffer errors.
    • overErrRx – The number of receive overrun errors.
    • packetRx – The number of packets received.
    • packetTx – The number of packets transmitted.
  • status – List details such as port name, MAC address, IP address, negotiated speed and OOS reason.
    • ipAddress – The IP address of this port.
    • macAddress – The MAC address of this port.
    • negotiatedSpeed – The negotiated speed of this port.
    • oosReason – The reason this port is out of service.

intervalStatistics

The system- wide settings for interval statistics.

  • maxFileRetentionPeriod – The maximum retention period for statistics files stored on disk. (range: 60-1440 / default = 60)
  • nodeId – The EMS configured nodeID for this system to be used as part of the filename when writing the statistics  to the file. (default = 0)
  • numOfPastIntervals – The maximum number of past intervals display in CLI. (range: 1-12 / default = 4)
  • timeInterval – The time interval for interval statistics data.

ipPolicing

The MIB Module for IP Monitoring statistics. These statistics are divided into three categories: Offenders List/Offenders Interval statistics, Micro Flow statistics and System statistics.

Some or all of the following fields appear in the Offenders List/Offenders Int Stats statistics, depending on the type:

  • Role – Role of this statistic
  • Index – Index  number of this statistic
  • Address Context – Address context associated with this statistic
  • Interface Group Name – IP interface group name
  • Interface Name – Interface name
  • Source IP Address – Source IP address
  • Destination IP Address – Destination IP address
  • Source IP Port – Source IP port
  • Destination IP Port – Destination IP port
  • IP Protocol – IP protocol
  • Ether Type – This field indicates the decimal value representing which protocol is encapsulated in the payload of the Ethernet Frame. For example, a value of 2048 equates to 0800 hexadecimal, which in turn represents IPv4.
  • Discard Count – The number of packets dropped
  • Ring Type – Media ring type
  • Source Unique – Determines if all discards were from a unique source address

Offenders Lists: (See Offenders Lists for additional details about each type of list)

  • aclOffendersList – The table of statistics for the ACL policer offenders list
  • aggregateOffendersList – The table of statistics for the aggregate policer offenders list
  • arpOffendersList – The table of statistics for the ARP policer offenders list
  • badEtherIpHdrOffendersList – The table of statistics for the bad Ethernet/IP Header policer offenders list
  • discardRuleOffendersList – The table of statistics for the discard rule offenders list
  • ipSecDecryptOffendersList – The table of statistics for the IPsec Decrypt policer offenders list
  • mediaOffendersList – The table of statistics for the media policer offenders list
  • rogueMediaOffendersList – The table of statistics for the rogue media policer offenders list
  • srtpDecryptOffendersList – The table of statistics for the SRTP decrypt offenders list.

  • uFlowOffendersList – The table of statistics for the micro flow policer offenders list

Offenders Interval Statistics:

  • aclOffendersListIntStats – The table of statistics for the ACL policer offenders list
  • aggregateOffendersIntStats – The table of statistics for the aggregate policer offenders list
  • arpOffendersListIntStats – The table of statistics for the ARP policer offenders list
  • badEtherIpHdrOffendersIntStats – The table of statistics for the bad Ethernet/IP Header policer offenders list
  • discardRuleOffendersIntStats – The table of statistics for the discard rule offenders list
  • ipSecDecryptOffendersIntStats – The table of statistics for the IPsec Decrypt policer offenders list
  • mediaOffendersIntStats – The table of statistics for the media policer offenders list
  • rogueMediaIntStats – The table of statistics for the rogue media policer offenders list
  • srtpDecryptOffendersIntStats The table of statistics for the SRTP decrypt offenders list.

  • uFlowOffendersListIntStats – The table of statistics for the micro flow policer offenders list

Micro Flow statistics:

NOTE: This command displays any micro flow entry regardless of whether SIPFE or MRM (or any sub-system) created the micro flow.

System statistics:

isOAM

Indicates whether the node is an OAM node.

  • false
  • true

jsrcServer

JSRC server configuration.

  • globalConfig – This defines global configuration applicable to all the JSRC servers.
  • remoteServer – JSRC server configuration.
  • serverStatus – JSRC server status.

ledStatus

Displays status of various LEDs of the server.

  • ledColor – Indicates the LED color.
  • ledState – Indicates the LED state.
licenseDomainBundleInfoLicense details for the domain licenses available on the SBC. See License Attributes table for details.

licenseInfo

The license status for registered license features. See License Attributes table for details.

licenseNodeLockedBundleInfo

License details for the node-locked licenses stored on the

Spacevars
0product
. See License Attributes table for details.

licenseRequired

Displays the licenseRequired configuration: The configured maximum number of licenses for a particular feature for a specific node when network-wide domain licensing is in effect. See License Attributes table for details.

(Applies to 'show table' command only)

licenseStatus

The CE license status table describes the current CE license state, for example "dualCe". See License Attributes table for details.

loadBalancingService

The Load Balancing Service status/statistics details with the following fields. See one of the following tables, as applicable, for details:

logicalMgmtIpInterface

The logical management IP interface status/statistics details with following fields:

  • name – The name of the logical IP interface.
  • mgmtIpInterfaceGroupName
  • ipAddress
  • state

logicalMgmtIpInterfaceStatus 

The Logical Mgmt IP Interface status status/statistics details with following fields:

  • name – The name of the logical IP interface.
  • operStatus – Operational status.
macAddressStatus

Displays MAC addresses of the system server(s).

  • <server name> – SBC server name.
  • status – Status of the specified MAC address.

  • usedBy – Name of the server using this MAC address.

  • usedByPort – The port used by this MAC address.

media

System- wide media configurations, UDP port range and RTP/RTCP peer inactivity timeout.

  • mediaPeerInactivity – media peer inactivity configurables.
  • mediaPortRange – Allowed range of UDP port numbers for RTP/RTCP media.
  • mediaRtcpControl – RTCP session configurables.

mediaProfile

DSP Media Profile configuration. (The System Media Profile configuration applies to hardware platforms (5400 series, 7000) only.)

  • compression – Percentage (of DSP cores) for capability COMPRESSION.
  • tone – Percentage (of DSP cores) for capability TONE.

memoryUtilCurrentStatistics

The memory utilization for the current interval period. Fields include:

  • ceName – The SBC server name.
  • average – The average memory % utilization for this interval.
  • averageSwap – The average swap % memory utilization for this interval.
  • high – The high memory % utilization for this interval.
  • highSwap – The high swap % memory utilization for this interval.
  • low – The low memory % utilization for this interval.
  • lowSwap – The low swap memory % utilization for this interval.

memoryUtilIntervalStatistics

The memory utilization for the 'n' number of intervals.

  • number – The interval sequence number. The number of intervals to store are configurable. Refer to Interval Statistics - CLI for status/statistics details.
  • ceName – The SBC server name.
  • average – The average memory % utilization for this interval.
  • averageSwap – The average swap memory % utilization for this interval.
  • high – The high memory % utilization for this interval.
  • highSwap – The high swap memory % utilization for this interval.
  • intervalValid – A setting of 'true' indicates the interval contains valid data during the time interval. Each interval is for a configurable fixed time (default interval is 15 minutes) starting on the hour. For example, if the system starts at 12:05, the first interval at 12:15 will not be valid because it is less than the 15-minute interval. Subsequent intervals will be valid upon meeting the 15-minute time interval. System switch-overs also cause invalid intervals because data is lost during the interval.
  • low – The low memory % utilization for this interval.
  • lowSwap – The low swap memory % utilization for this interval.
  • time – The system up time when the interval statistic is collected.
metaVariable

Displays the system dynamic metavariable names and values.

  • ceNameDisplays the name of the instance along with its HA IP address.
  • nameDisplays the name of the interface definition parameters.
  • valueDisplays the value associated with the IDP.
metaVariableDynamic

Displays user-configured metavariables that add to the metadata available to an existing SBC SWe N:1 HA or cloud-based deployment.

  • ceName – Displays the name of the instance along with its HA IP address.
  • name – Displays the name of an interface definition parameter.
  • value – Displays the value assigned to the specified parameter.

mgmtIpInterfaceGroup

A group of management IP interfaces for the default address context. See Mgmt IP Interface Group Parameters table below for details.

mgmtStaticRoute

Static IP routes for this address context.

  • <destination IP address>
  • preference – Route preference value.
networkProcessorStatistics

NOTE: For internal debug use only.

Network Processor statistics details.See Network Processor Attributes table below for details.

networkSegmentTable

Stores and manages the configuration of floating IPs associated with the Network Segment.

niceLicenseReports whether the SBC NICE recording feature is dependent on the setting for the feature within the SBC's license. For deployments that upgraded and were already using the legacy license model, this status is set to "true" automatically and access to the NICE recording feature is maintained without the need to install a new license. If the status is set to "false" your installed license must have NICE recording explicitly enabled to enable the feature.

ntp

NTP services management details. See NTP Attributes table below for details.

objectStoreParametersParameters used to specify an object store service to upload or download a configuration file ( SBC SWe cloud-based deployments only)
pathCheckPath

Path for ICMP ping mechanism

  • name – Path Check Path name
  • sourceIpAddress – Source IP address of the ping path
  • targetIpAddress – Target IP address of the ping path
  • reportSignalIpAddress – Reported Signaling IP address of the ping path
  • reportSignalIpPort – Reported Signaling Port of the ping path
  • pathCheckProfile – Path Check profile name used when pinging this peer
  • addressContext – Address Context where the corresponding Interface Group is present
  • zone – Zone name used when pinging this peer
  • ipInterfaceGroup – IP Interface Group where the corresponding IP Interface is present.
  • ipInterface – IP interface from which ping should be generated.
  • state – Administrative state of pathCheckPath (active pinging state).

NOTE: This field applies to the 'show table' command only.

pdcsLicenseReports whether the SBC feature which enables lawful call interception based on receipt of a SIP P-DCS-LAES header is dependent on the setting for the feature within the SBC's license. For deployments that upgraded and were already using the legacy license model, this status is set to "true" automatically and access to the P-DCS-LAES feature is maintained without the need to install a new license. If the status is set to "false" your installed license must have the P-DCS-LAES feature explicitly enabled to enable the feature.

policyServer

Softswitch servers and client services status/statistics details. See Policy Server Attributes table below for details.

powerSupplyStatus

Power consumption/state of the server.

  • <server name>
  • partNum – Identifies the part number of the module.
  • powerFault – Indicates if there is power fault.
  • present – Indicates if the module is present or not.
  • productName – Identifies the name (as given by manufacturer) of power supply module.
  • serialNum – Identifies the serial number of the power supply module.
  • voltageFault – Indicates if there is voltage fault.
rgStatus

Displays the status of the instances in a redundancy group.

NOTE: This command applies to N:1 redundancy configurations only.

savedConfigList

List of configurations saved on the system.

  • <index of saved config. file>
  • fileName – The file name of the saved configuration.
  • size – Indicates size of the saved configuration file (KBytes).
  • version – The software version name of the saved configuration.
sbcliLicenseReports whether the SBC feature which enables lawful interception (LI) service using ERE is dependent on the setting for the feature within the SBC's license. For deployments that upgraded and were already using the legacy license model, this status is set to "true" automatically and access to the feature is maintained without the need to install a new license. If the status is set to "false" your installed license must have the LI feature explicitly enabled to enable the feature.
sbcPersonalityStatus

Displays the personality role of the

Spacevars
0product2
instance. Choices are isbc, msbc and ssbc.

security

Security management status/statistics details. See Security Attributes table for details.

serverAdmin

The serverAdmin table describes the configuration of each server module.

  • name – The node name.
  • actualCeName
    • Cloud platform: The ceName provided in the user data.
    • Non-cloud platform: The
      Spacevars
      0product
      name entered during the
      Spacevars
      0product
      application installation.
  • coredumpProfile – The core dump settings for this server.
  • role – If set to ‘primary’, role designates a server for internal processing.
  • deviceSmartAttrib – The smart control attribute value that reports disk life remaining. A value of 0 means that no overriding attribute is available. The SBC could still be using an internal value based on pre-defined settings of known disk types. If the SBC is unable to retrieve a value (reports "n/a") for "Disk Life Remaining" when you run the hardDiskStatus command you may be able to specify the integer ID number of a smart control attribute that reports the percentage lifetime used for the disk. Contact Ribbon Technical Support for assistance in determining whether there is a valid smart control attribute available on your system.
  • modularType – If set to 'true', the SBC uses modular DSPs.
  • hwType The type of server module the indexed slot has been configured to accept.
  • hwSubType – This field stores the SBC SWe subscription type.

    • virtual – SBC SWe configured for a virtualized (non-cloud) environment.
    • virtualCloud – SBC SWe configured for a cloud-based environment.
Info
titleNote

Users can access packet port speed info using the following command:

show table system ethernetPort packetPortStatus


serverSoftwareUpgradeStatus

The system server software upgrade status table describes the status of the server software upgrade module.

  • <server name>
  • upgradeStatus – Indicates the current status of the server (none, pendingRevert, pendingUpgrade, reverted, reverting, revertingOnError, upgraded, upgrading)

serverStatus

The system server status table provides status of the server module.

  • name – The node name.
  • hwType – The type of server module the indexed slot has been configured to accept.
  • serialNum Serial number of the server module.
  • partNum – Identifies the part number of the module.
  • platformVersion – Platform version currently running on server.
  • applicationVersion – Indicates the application version currently running on server.
  • mgmtRedundancyRole – Redundancy role of the server (for management entities)
  • upTime – Server module uptime in days/hours/minutes/seconds
  • applicationUpTime – Indicates application uptime on the server in days/hours/minutes/sec.
  • lastRestartReason – Reason for last restart of server.
  • syncStatus – Inter-CE data synchronization state.
  • daughterBoardPresent – Daughter board presence indicator.
  • currentTime – Current system time.
  • pktPortSpeed – Packet port speed setting (1Gps, 10Gps).
  • actualCeName
    • Cloud platform: The ceName provided in the user data.
    • Non-cloud platform: The
      Spacevars
      0product
      name entered during the
      Spacevars
      0product
      application installation.

  • hwSubType – This field stores the SBC SWe subscription type.

    • virtual – SBC SWe configured for a virtualized (non-cloud) environment.
    • virtualCloud – SBC SWe configured for a cloud-based environment.
  • fingerprint – The licensing fingerprint for the node.
serviceDiscovery

The settings for the Service Registry and name server used to resolve FQDNs as part of Service Discovery. Refer to Service Discovery for Trap Target Destinations and RAMP Registration.

  • serviceRegistry – name of the Service Registry.
    • nameserver –  numeric index of name server (0 to 7).
      • hostname – FQDN for the name server.
      • ipAddress – IP address for the name server.
      • port – port number on the name server (1 to 65535).
      • priority – priority for the name server (0 to 100).
      • weight – weight for the name server (0 to 100).
    • transport – type of transport to reach the name server: <fallback | tcp | udp | udpEdns0>.
    • attempts – number of attempts to retry before a request to a name server is dropped (1 to 4294967295).
    • timeout timeout, in ms, before a request to a name server times out (100 to 4294967295).
    • resolve – resolve parameters
      • recursewhether the resolution of a service should be recursive (false | true).
      • roundRobin whether the order in which name servers are queried should be random (false | true).
      • ttl the maximum time-to-live, in seconds, to use when resolving an entry (1 to 4294967295).
slbSIP-aware front-end Load-Balancer (SLB) configuration. See SLB for details.
softwareUpgradeDetailedStatus

<system name> detailedStatus – Prints the complete Live Software Upgrade (LSWU) upgrade details for the specified system to the screen. Details include the number of steps involved, the time taken to completed LSWU and upgrade process results.

softwareUpgradeStatus

LSWU status at any given time with the following details.

  • activeCeAtStart – Active CE name when the upgrade started.
  • cemodeAtStart – CE mode when upgrade started (single/dual).
  • modelChange – Indicates if process model changed as part of this upgrade.
  • newRelease – Software release to which the upgrade is performed.
  • oldRelease – Software release running before upgrade started.
  • package – Name of the new package.
  • previousState – This is the previous LSWU state.
  • primaryUpgradeStatus – Indicates the current status of the primary server.
  • reason – Exit reason for failure of last software upgrade.
  • revertScript – Revert script to run in case upgrade fails.
  • revertStartTime – Start time of revert activity.
  • rpmName – Name of the new rpm used for upgrade.
  • secondaryUpgradeStatus – Indicates the current status of the secondary server.
  • state – Current LSWU state.
  • upgradeScript – Script to run to perform upgrade.
  • upgradeStartTime – LSWU start time.
standbySyncStatus

Sync status details of the standby node for active nodes created through a N:1 redundancy group configuration.

  • Call/Registration Data – The sync state of Call/Registration data for active or standby node.
  • Metavar Data – The sync state of metavariable data for the active or standby node.

syncStatus

HA Redundancy:

Sync status of both the active and standby nodes for an SBC HA pair.

  • Call/Registration Data – Call/Registration data synchronization status with the SBC peer 
  • Configuration Data – Configuration data synchronization status with the SBC peer
  • Disk Mirroring – Disk Mirroring synchronization status with the SBC peer
  • Policy Data – Policy data synchronization status with the SBC peer

N:1 Redundancy:

Sync status of both the active and standby nodes created through a N:1 redundancy group.

  • Call/REgistration DataThe sync state of Call/Registration data for active or standby node.
  • Metavar DataThe sync state of metavariable data for the active or standby node.

systemCongestionCurrentStatistics

The System Congestion Current Statistics table details.

  • avgCallRate – The average call rate calculated using the formula: (# call attempts in an interval) / (# seconds elapsed in that interval).
  • avgRegRate – The average registration rate calculated using the formula: (# registration attempts in an interval) / (# seconds elapsed in that interval).
  • avgSubsRate – The average SIP SUBSCRIBE arrival rate calculated using the formula: (# SUBSCRIBE attempts in an interval) / (# seconds elapsed in that interval).
  • callArrivals – The number of call arrivals since the current interval started.
  • emergencyCallArrivals – The number of SIP emergency call arrivals since the current interval started.
  • emergencyCallRejects – The number of SIP emergency call rejects since the current interval started.
  • levelMC1Count – The number of transitions into MC1 since the current interval started.
  • levelMC1TotalTime – The total number of seconds spent in MC1 since the current interval started.
  • levelMC2Count – The number of transitions into MC2 since the current interval started.
  • levelMC2TotalTime – The total number of seconds spent in MC2 since the current interval started.
  • levelMC3Count – The number of transitions into MC3 since the current interval started.
  • levelMC3TotalTime – The total number of seconds spent in MC3 since the current interval started.
  • overloadRejects – The number of calls rejected due to system congestion since the current interval started.
  • peakCallRate – The system peak call arrival rate (in calls per second) since the current interval started.
  • peakRegRate – The peak SIP registration arrival rate (in registrations per second) since the current interval started.
  • peakSubsRate – The peak SIP SUBSCRIBE arrival rate (in subscriptions per second) since the current interval started.
  • sipRegArrivals – The number of SIP registrations arrivals since the current interval started.
  • sipRegRejects – The  number of SIP registrations rejected since the current interval started.
  • sipSubsArrivals – The number of SIP SUBSCRIBEs that arrived since the current interval started.
  • sipsSubsRejects – The number of SIP SUBSCRIBEs that are rejected due to system congestion since the current interval started.

systemCongestionIntervalStatistics 

The System Congestion Interval Statistics details.

  • <sequence number> – The interval sequence number. The number of intervals to store are configurable. Refer to Interval Statistics - CLI for configuration details.
  • avgCallRate – The system average call arrival rate over the reporting inteval (callArrivals / interval-time = avgCallRate).
  • avgRegRate – The average SIP registration arrival rate (in registrations per second) over the reporting interval.
  • avgSubsRate – The average SIP SUBSCRIBE arrival rate (in subscriptions per second) over the reporting interval.
  • callArrivals – The total count of call arrivals during the interval (callArrivals / interval-time = avgCallRate) .
  • emergencyCallArrivals – The total count of SIP emergency calls that arrived.
  • emergencyCallRejects – The total count of rejected SIP emergency calls.
  • intervalValid – A setting of 'true' indicates the interval contains valid data during the time interval. Each interval is for a configurable fixed time (default interval is 15 minutes) starting on the hour. For example, if the system starts at 12:05, the first interval at 12:15 will not be valid because it is less than the 15-minute interval. Subsequent intervals will be valid upon meeting the 15-minute time interval. System switch-overs also cause invalid intervals because data is lost during the interval.
  • levelMC1Count – The total count of transitions into MC1 during the interval.
  • levelMC1TotalTime – The total time spent (in seconds) in MC1 during the interval.
  • levelMC2Count – The total count of transitions into MC2 during the interval.
  • levelMC2TotalTime – The total time spent (in seconds) in MC2 during the interval.
  • levelMC3Count – The total count of transitions into MC3 during the interval.
  • levelMC3TotalTime – The total time spent (in seconds) in MC3 during the interval.
  • maxActiveCalls – The high water mark of the total number of active calls in both inbound and outbound directions on all trunk groups in the system for specified interval. This statistic applies to calls which are setting up, tearing down or stable.

    Switch-over scenario:

    When a switch-over occurs from SBC-A to SBC-B, the number of stable calls that were transferred from SBC-A to SBC-B equals the initial value of "maxActiveCalls" (immediately after the switch-over). Subsequent values are calculated and recorded accordingly.

  • overloadRejects – The total count of calls rejected during the collection interval.
  • peakCallRate – The system peak call arrival rate (in calls per second) measured during the collection interval.
  • peakRegRate – The peak SIP registration arrival rate (in registrations per second) measured during the collection interval.
  • peakSubsRate – The peak SIP SUBSCRIBE arrival rate (in subscriptions per second) measured during the collection interval.

  • sipRegArrivals – The total count of SIP registrations that arrived during the collection interval.
  • sipRegRejects – The total count of SIP registrations rejected during the collection interval.
  • sipSubsArrivals – The total count of SIP SUBSCRIBEs that arrived during the collection interval.

  • sipsSubsRejects – The number of SIP SUBSCRIBEs rejected during the collection interval.

  • time – The system up time when the interval statisitic is collected.

systemCongestionStatus

System Congestion status status/statistics details.

  • systemCongestionCPULevel – The current System Machine Congestion (MC) Level at the time this command is executed.
    • 0 – No Congestion

    • 1 – Level one congestion

    • 2 – Level two congestion

    • 3 – Level three congestion

  • systemCongestionCallAcceptCount – A snapshot of the number of calls being accepted by the system. A value of "65535" represents all calls. During MC2 congestion, SBC calculates the CallAcceptRate peridocially (each second), and uses the value to compute a new CallAcceptCount.
  • systemCongestionCallAcceptRate – Current rate (in calls per second) at which calls are being accepted by the system.
  • systemCongestionCallArrivalRate – A snapshot of the number of call arrivals in the last second.
  • systemCongestionCallEqArrivalRate – Indicates the number of call/subscribes/registrations arrival per second. For registrations and subscriptions, the counter is incremented after every four new subscriptions/registrations. For calls, the counter is incremented after every new call.
  • systemCongestionCallRateLevel – Call rate congestion level.
  •  systemCongestionIRTTLevel – Internal RoundTrip Time (IRTT) congestion level.
  • systemCongestionMCDuration – Number of seconds the system has been at this congestion level.
  • systemCongestionMCLevel – System congestion level.
  • systemCongestionRegArrivalRate –  A snapshot of the number of SIP registration arrivals in the last second.
  • systemCongestionSubsArrivalRate – The number of SIP SUBSCRIBEs that arrived in the last second.
transcodeInfo

(Available only on SWe except S-SBC SWe)

  • cpu – Number of cores used by CPU-based transcoding. This is system level information and shows only one entry in case of HA system.
  • gpu – GPU information. This is system level information and shows only one entry in case of HA system.
    • gpuName Name of the GPU, this is used to differentiate between instances of same GPU type such as M60_0, M60_1.
    • cpuCoresUsed CPU cores used for GPU transcoding by this GPU.
    • gpuType   GPU type.
    • gpuAllocationRatio GPU allocation ratio. Reserved for future use.
transcodeType

(Available only on SWe except S-SBC SWe)

Shows type of transcode information used (CPU, GPU, CPU + GPU, HWDSP). This is system level information and shows only one entry in case of HA system.



Include Page
_FIPS_Releases
_FIPS_Releases

Admin

Command Syntax

Code Block
> show table system admin <system name>


Command Parameters

Admin Attributes

Parameter

Description

<system name>

System name

accountManagement 

Account and password management-related configuration

actualSystemNameSystem name given by the user as user/metadata
auditLogState

Management audit log state

bannerThe configurable banner text that displays when users login to EMA and CLI applications. Refer to Banner - CLI for configuration details
cliSetWarningSupport

Setting to enable/disable warning prompts configured for the set command

clusterIdclusterID instance present in the userdata
contact Contact information of the system
defaultAccountLocalOnly

This flag determines whether the default admin user must be locally authenticated. Options are:

  • true
  • false (default)

The option can only be set to true when the options that enable/disable local authentication on the SBC generally, localAuthenticationEnabled and externalAuthenticationEnabled, are also set to true. If both local and external (RADIUS) authentication are enabled on the SBC then the method for authentication of the default admin user is governed by the new flag.

dodDOD-related configuration
dspMismatchAction 

Action to take for one of the following DSP mismatch conditions:

  1. Mismatch in DSP card installation across any/all slot locations. Cards must match by slot location. For any mismatched slot, DSP capacity is not used when “preserveRedundancy” is configured (and card dried up if calls were already in place when the mismatch occurred), or if left unprotected when “preserveCapacity” is configured.
  2. Mismatch in DSP card type within a slot location. Card installations must match by type – DSP25 (higher capacity) or DSP20 (lower capacity). Same rules as above apply.
externalAuthenticationEnabled The Conf-D CLI user information stored on remote Radius server for authentication
fips-140-3

FIPS-140-3 related configuration and commands

localAuthenticationEnabled The Conf-D CLI user information stored locally for authentication
location Physical location of the system.
haMode

Identifies the HA mode of the system.

  • haMode1to1 (default) - Is the traditional HA/redundancy model (1:1 scenario) where one active instance is backed up by one standby instance. In 1:1 HA mode, the
    Spacevars
    0product
    configuration is synchronized between active and standby
    Spacevars
    0product
    s.
  • haModeNto1 - Up to N active
    Spacevars
    0product
    instances are backed up by a single standby instance (N:1). In this mode, a 1:1 HA pair of dedicated Operations, Administration, and Maintenance (OAM) nodes is deployed to configure and manage SBC nodes. The SBC instances in such deployments have homogeneous configuration. The active OAM node holds the active configuration for the cluster and is responsible for sharing this configuration with the SBC nodes in the cluster.

NOTE: haModeNto1 is supported in

Spacevars
0product
SWe cluster deployments in an OpenStack cloud, and on VMware when deployed using the IaC environment. 

passwordDictionaryPassword management dictionary related configuration
passwordRules The rules implementing Conf-D user password policy
passwordRulesForAdminThe rules implementing user password policy for Administrator users
preserveCapacity 

The Active continues to use the extra DSP capacity, as needed, assuming appropriate session licenses are in place; partial redundancy is in effect

NOTE: If a switchover occurs, calls using the extra, non-matching DSP capacity on Active are not protected during switchover (i.e. partial redundancy)

preserveRedundancy 

The Active automatically triggers a graceful dry-up in an attempt to align DSP hardware capabilities. Once dry-up completes, the Active uses the protected, matching DSP capacity to preserve redundancy.

NOTE: During the dry-up period, active calls using the extra, non-matching DSP capacity are not protected in the event that a switchover occurs before the dry up completes.

rest

Spacevars
0model1
 flag setting

savedConfigurationsA list of saved configurations, by revision number and the timestamp when the configuration was saved. Applicable for SBC SWe N:1 HA cluster deployments using OAM configuration mode.
sftpUserPasswordPassword rules for SFTP user
sshPublicKeyAuthorizationEnabledThe current state of this flag which is used for SSH public key authentication through CLI for all users
utilMonitorStatsInterval The time interval for system resource monitoring statistics.

utilMonitorStatsNumOfPastInterval 

The number of past intervals saved for system resource monitoring statistics.

verifyAutoIndexView the verifyAutoIndex setting.


Announcements

Announcement file status and statistics.

Command Syntax

Code Block
> show table system announcements

Command Parameters

Multiexcerpt
MultiExcerptNameAnnouncement Parameters

Announcements Attributes

ParameterDescription
memoryUsage

Announcement segment NP memory usage.

  • cachedSegments – Number of announcement segments cached in NP memory.
  • totalCacheMemory – Total amount of segment cache memory available in NP.
  • totalPlayoutTime – Total playout time of all segments cached in NP memory.
  • totalSegments – Total number of announcement segments on disk.
  • usedCacheMemory – Amount of segment cache memory being used in NP.
  • utilizedCacheMemory – Percentage of segment cache memory being used in NP.

segmentStatus <segment ID>

Announcement segment file status.

  • audioFormat – Compression type of audio data.

  • audioLength — Length of audio data in segment file.

  • pathname – Pathname of segment file.

  • playoutDuration – Playout duration of segment file.

  • state – State of segment.

  • totalPlays – Total number of times this segment has been played.

  • useCount – Number of announcements currently using this segment.

  • version – Version number of segment file.


AD Sync Status

Command Syntax

Code Block
> show table system adSyncStatus

Command Parameters

Table 4: adSyncStatus Command Parameters

ParameterDescription
adSyncStatus

Displays AD server sync status

Specifies one of the following status values:

  • neverSynced - data never synced
  • syncInProgress - sync is currently in progress
  • syncCompleted - data sync was successfully completed
  • syncFailed - the sync operation failed

CPU Transcode Status
Anchor
CPUTranscodeStatus
CPUTranscodeStatus
 

The CPU Transcode Status captures the information on spilled over channels due to the exhaustion of GPU resources. GPU codecs appear on the CPU when the GPU resources are exhausted and cannot accommodate GPU-supported codec channels, so the codec channels spill onto the CPU. You can use the show status system cpuTranscodeStatus command only on GPU accelerated SWe and only for codecs with GPU support.

Info

Applies to SBC SWe Only.

Command Syntax

Code Block
show table system cpuTranscodeStatus

Command Parameters

Table 5: cpuTranscodeStatus Descriptions

ParameterStatus Names and Descriptions

cpuTranscodeStatus

<system name> – The

Spacevars
0product
system name.

  • amrNbUsed - Number of AMR channels spilled over onto CPU.

  • amrWbUsed - Number of AMR-WB channels spilled over onto CPU.
  • evrc0Used - Number of EVRC channels spilled over onto CPU.
  • evrcb0Used - Number of EVRCB channels spilled over onto CPU.
  • evsUsed - Number of EVS channels spilled over onto CPU.
  • opusUsed - Number of OPUS channels spilled over onto CPU.
  • g722Used - Number of G.722 channels spilled over onto CPU.
  • g729AbUsed - Number of G.729AB channels spilled over onto CPU.

Daughter Board Status

Server Daughter Board (DB) status details.

Info

Applies to SBC 7000 only.

Command Syntax

Code Block
> show table system daughterBoardStatus


Command Parameters

Multiexcerpt
MultiExcerptNameDaughter Board Parameter

Daughter Board Status Attributes

 ParameterDescription 
daughterBoardStatus<server name> Server name
daughterBoardId

Daughter board identifier

SBC 7000 series:

  • FRU_DSP1 – SBC 7000 DSP-LC slot 1
  • FRU_DSP2 – SBC 7000 DSP-LC slot 2

  • FRU_DSP3 – SBC 7000 DSP-LC slot 3

  • FRU_DSP4 – SBC 7000 DSP-LC slot 4

fpgaVersion

 A card’s programmed firmware version (using FPGA build date)

NOTE: This maintenance field does not apply to SPS100 cards.

imageLoadFailureCount

Number of module boot failures since the last successful module boot, for use during diagnostic testing of a potentially failed module.

NOTE: This maintenance field does not apply to SPS100 cards.

operationalStatus

Operational state of daughter board.

  • disabled – Card is disabled.
  • dryup – Card is enabled but in the process of drying up. Once completed, card will be set to ‘disabled’.
  • enabled – Card is enabled.
  • failed – If a DSP2x or DSP-LC module fails to boot over three consecutive tries (typically due to a hardware failure), it is taken out of service and marked as state “failed”. The rest of the system continues to boot normally, including any other DSP modules. The module failure is logged/alarmed with trap “sonusConnexIpSystemCESlotFailedNotification”. The slot remains in the failed state until the module is disabled and re-enabled once a replacement card is installed.
  • loading – Card is enabled but in the process of booting. Resources are not yet available. Once completed, card will be set to ‘enabled’.
  • locked – Slot capacity is locked out due to mismatch (with “preserveRedundancy” configured).
partNumThe part number of the module (if present)
presentIndicates if the module is present or not.
productNameIdentifies manufacturer name of module (if present)

serialNum

Identifies the serial number of the module (if present)


Anchor
DSP Attributes
DSP Attributes
DSP

DSP PAD

DSP PAD configuration service (SBC must be restarted for new configuration to take effect).

Command Syntax

Code Block
> show table system dspPad

Command Parameters

Multiexcerpt
MultiExcerptNameDSP PAD Parameters

DSP PAD Attributes

ParameterDescription
audioTxDuring2833

State of Audio Transmit During 2833.

comfortEnergy

Initial estimate (in –dBm) to be used for generating comfort noise.

jitterEvalPeriod

Time period to decide when to periodically evaluate playout occupancy (in milliseconds).

jitterMinOccThsh

If occupancy falls below this threshold for some time period we advance the playout time (in milliseconds).

playoutTimeseriesPeriod

Duration of one period of the RTP playout buffer loss time series statistic.

playoutTimeseriesThreshold0

Threshold #0 for generation of the playout loss time series statistic.

playoutTimeseriesThreshold1

Threshold #1 for generation of the playout loss time series statistic.

playoutTimeseriesThreshold2

Threshold #2 for generation of the playout loss time series statistic.

rtpDtmfRelay

RTP Payload type to be received as DTMF relay during compressed calls.

sidHangoverTime

Minimum time (in milliseconds) after DSP detects speaker going inactive before sending silence packets.

sidMaxNoiseFloor

Maximum noise floor (in –dBm).

sidMaxTime

Maximum time (in milliseconds) between silence packets.

sidMinNoiseFloor

Minimum noise floor (in –dBm).

sidMinTime

Minimum time (in milliseconds) between silence packets.

toneThreshold

Percentage Threshold crossing value for tone resources.

toneThresholdState

State of Tone Threshold Event.

universalCompressionThreshold

Percentage Threshold crossing value for Universal Compression resources.

universalCompressionThresholdState

State of Universal Compression Threshold Event.

highPriorityCompressionReservation

Percentage of compression resources (0-100, default = 0) reserved for high priority calls.

highPriorityToneReservationPercentage of tone resources (0-100, default = 0) reserved for high priority calls.


Command Example

Code Block
> show table system dspPad
jitterEvalPeriod                   1000;
jitterMinOccThsh                   20;
rtpDtmfRelay                       100;
sidMinTime                         200;
sidMaxTime                         2000;
sidHangoverTime                    300;
sidMinNoiseFloor                   60;
sidMaxNoiseFloor                   48;
comfortEnergy                      56;
universalCompressionThreshold      90;
universalCompressionThresholdState enabled;
playoutTimeseriesPeriod            20000;
playoutTimeseriesThreshold0        0;
playoutTimeseriesThreshold1        200;
playoutTimeseriesThreshold2        600;
toneThreshold                      90;
toneThresholdState                 enabled;
audioTxDuring2833                  enabled;
highPriorityCompressionReservation 0;
highPriorityToneReservation        0;


DSP Resources

Command Syntax

Code Block
> show table system dspRes
	dspCallCurrentStatistics
	dspCallIntervalStatistics
	dspUsageCurrentStatistics
	dspUsageIntervalStatistics


Command Parameters

Multiexcerpt
MultiExcerptNameDSP Resources Parameters

DSP Resources Attributes

ParameterDescription

dspRes

<system name or sequence number>

  • The system name (for CurrentStatistics objects).
  • A sequence number which identifies the interval for which the set of statistics is required (for IntervalStatistics objects).
dspCallCurrentStatistics

The System Call DSP Resource Current table containing the following information:

The following statistics are collected in this table for each codec.

  • numCallSuccessNoDspAllocFailure – Number of successful calls without DSP resource allocation failure during the current time interval.
  • numCallSuccessWithDspAllocFailure – Number of successful calls with DSP resource allocation failure during the current time interval.
  • numCallFailNo<codec> – Number of calls failed due to lack of DSP resource for the specified codec since initialization/last reboot.
  • numCallFailOtherOn<codec> – Number of call fails due to reason other than lack DSP resources for the specified codec since initialization/last reboot.
  • numCallSuccessNo<codec> – Number of successful calls even though lack of DSP resourcesfor the specified codec since initialization/last reboot.
dspCallIntervalStatistics

The System Call DSP Resource Interval table containing the following statistics for the 'n' number of intervals:

  • number – The interval sequence number. The number of intervals to store are configurable. Refer to Interval Statistics - CLI for configuration details.
  • intervalValid– A setting of 'true' indicates the interval contains valid data during the time interval. Each interval is for a configurable fixed time (default interval is 15 minutes) starting on the hour. For example, if the system starts at 12:05, the first interval at 12:15 will not be valid because it is less than the 15-minute interval. Subsequent intervals will be valid upon meeting the 15-minute time interval. System switch-overs also cause invalid intervals because data is lost during the interval.
  • time – The system up time when the interval statistics are collected.
  • numCallSuccessNoDspAllocFailure – Number of successful calls without DSP resource allocation failure for the defined time interval.
  • numCallSuccessWithDspAllocFailure – Number of successful calls with DSP resource allocation failure for the defined time interval.
  • numCallFailNo<codec> – Number of failed calls due to lack of DSP resource for the specified codec during the defined time interval.
  • numCallSuccessNo<codec> – Number of successful calls even though lack of AMRNB DSP resource for the specified time interval.
dspUsageCurrentStatistics

The DSP Resource statistics details.

The following statistics are collected in this table for each codec. Statistics are collected once per second.

  • <codec>AverageAvailCount – The running average number of free DSP resources for the specified codec since the SBC started up.
  • <codec>AverageUsedCount – The running average number of used DSP resources for the specified codec since the SBC started up.
  • <codec>PeakUsedCount – The peak number of resources used for the specified codec since the SBC started up.

For information on the supported codecs, refer to Audio Codecs.

dspUsageIntervalStatistics

The DSP Resource Interval table containing the following statistics over the 'n' number of intervals. Interval statistics are weighted per codec type.

  • number – The interval sequence number. The number of intervals to store are configurable. Refer to Interval Statistics - CLI for configuration details.
  • intervalValid – A setting of 'true' indicates the interval contains valid data during the time interval. Each interval is for a configurable fixed time (default interval is 15 minutes) starting on the hour. For example, if the system starts at 12:05, the first interval at 12:15 will not be valid because it is less than the 15-minute interval. Subsequent intervals will be valid upon meeting the 15-minute time interval. System switch-overs also cause invalid intervals because data is lost during the interval.
  • time – The system up time when the interval statisitics are collected.
  • <codec>AverageAvailCount – The running average number of free DSP resources for the specified codec over the defined interval.
  • <codec>AverageUsedCount – The running average number of used DSP resources for the specified codec over the defined interval.
  • <codec>PeakUsedCount – The peak number of resources used for the specified codec over the defined interval.

For information on the supported codecs, refer to Audio Codecs.

NOTE: The number of available transcoded calls depends on whether or not back-to-back transcoding is required. Also, DSP resources are commonly held during call setup (even when transcoding ultimately is not required on the call).  At a high call rate this can marginally cut into the number of DSP resources available on the system.


DSP Status

This statistic command provides the current number of transcoded sessions per DSP2x slot. The SBC 5400 can include up to four DSP25 modules, and the SBC 7000 can include up to four DSP-LC modules.

(Refer to DSP Channel Densities for SBC 5400 and 7000 for details).

Command Syntax

Code Block
> show table system dspStatus dspUsage


Command Parameters

Multiexcerpt
MultiExcerptNameDSP Status Parameters

DSP Status Attributes

ParameterDescription

dspStatus dspUsage

<system name> – The

Spacevars
0product
system name.

The below fields display raw count of DSP resources (i.e. channels) in use on each slot to aid in understanding which slots are loaded and to what extent in case card removal/hot swap is necessary.

  • slot1ResourcesUtilized
  • slot2ResourcesUtilized

  • slot3ResourcesUtilized

  • slot4ResourcesUtilized

For each DSP codec, a <codec>Total and <codec>Utilization field displays. 

    1. The <codec>Total field indicates how many transcoding sessions the system can support for that codec to G.711.
    2. The <codec>Utilization field indicates what percent of those sessions are actually in use.

      NOTE: For compressed-to-compressed transcoding, two resources are required, one for each codec. 

Additional fields:

  • amrNbTotal – Total AMR–NB resource capacity on this server.

  • amrNbUtilization – Percentage utilization of AMR–NB resources on this server.

  • amrNbT140Total - Total AMR-NB with T.140 resource capacity on this server.
  • amrNbT140Utilization - Percentage utilization of AMR-NB with T.140 resources on this server.
  • amrWbTotal – Total AMR–WB resource capacity on this server.

  • amrWbUtilization – Percentage utilization of AMR–WB resources on this server.
  • amrWbT140Total - Total AMR-WB with T.140 resource capacity on this server.
  • amrWbT140Utilization - Percentage utilization of AMR-WB with T.140 resources on this server.
  • compressionAllocFailures – Running count of resource allocation failures due to resource exhaustion.
  • compressionAvailable – Actual compression resources currently available in real time. This essentially equates to the total number of G.711 resources after loading.
  • compressionHighPriorityUtilization - Percentage utilization of compression resources used for high priority calls on this server.
  • compressionTotal – Maximum number of compression resources on the server (i.e. before loading, so this number is static). This essentially equates to the total number of G.711 resources before loading (i.e. lightest codec).
  • compressionUtilization – Percentage of compression resources in use (accounting for various codec weights). This can be calculated using the formula (compressionTotal compressionAvailable) / compressionTotal.
    NOTE: Use this value when determining the extent of DSP module load (regardless of codec type).

  • ecmTotal – Total T.38 ECM resource capacity on this server.
  • ecmUtilization – Percentage utilization of T.38 ECM resources on this server.
  • ecmV34Total – Total T.38 ECM V.34 resource capacity on this server.
  • ecmV34Utilization – Percentage utilization of T.38 ECM V.34 resources on this server.
  • efrTotal – Total EFR resource capacity on this server.
  • efrUtilization – Percentage utilization of EFR resources on this server.
  • evrc0Total – Total EVRC0 resource capacity on this server.
  • evrc0Utilization – Percentage utilization of EVRC0 resources on this server.
  • evrcb0Total – Total EVRCB0 resource capacity on this server.
  • evrcb0Utilization – Percentage utilization of EVRCB0 resources on this server.
  • g711SsTotal – Total G711SS (silence suppression) resource capacity on this server.
  • g711SsUtilization – Percentage utilization of G711SS (silence suppression) resources on this server.

  • g711Total – Total G711 resource capacity on this server.
  • g711Utilization – Percentage utilization of G711 resources on this server.
    NOTE: The g711Utilization includes g711 channels in use plus channels that are reserved but not activated as part of the call set up process.  In this case, ensure to reserve enough resources to account for the worst case codec. For example, in release 4.2.x, a reserved channel is about 4.5 times as expensive as a G.711 channel. 

  • g711V8Total – Total G711 V8 resource capacity on this server.

  • g711V8Utilization – Percentage utilization of G711 V8 resources on this server.

  • g722Total – Total G.722 resource capacity on this server.
  • g722Utilization – Percentage utilization of G.722 resources on this server.
  • g722V8Total – Total G.722 V8 resource capacity on this server.

  • g722V8Utilization Percentage utilization of G.722 V8 resources on this server.

  • g726Total – Total G726 resource capacity on this server.
  • g726Utilization –  Percentage utilization of G726 resources on this server.
  • g726V8Total Total G726 V8 resource capacity on this server.

  • g726V8Utilization Percentage utilization of G726 V8 resources on this server.

  • g729AbTotal – Total G729A+B resource capacity on this server.
  • g729AbUtilization – Percentage utilization of G729A+B resources on this server.
  • g729AbV8Total Total G729A+B V8 resource capacity on this server.

  • g729AbV8Utilization Percentage utilization of G729A+B V8 resources on this server.

  • g7221Total – Total G.722.1 resource capacity on this server.
  • g7221Utilization – Percentage utilization of G.722.1 resources on this server.
  • g7221V8Total Total G.722.1 V8 resource capacity on this server.

  • g7221V8Utilization Percentage utilization of G.722.1 V8 resources on this server.

  • g7231Total – Total G723.1 resource capacity on this server.
  • g7231Utilization – Percentage utilization of G7231 resources on this server.
  • g7231V8Total Total G723.1 V8 resource capacity on this server.

  • g7231V8Utilization Percentage utilization of G7231 V8 resources on this server.

  • ilbcTotal – Total iLBC resource capacity on this server.
  • ilbcUtilization – Percentage utilization of iLBC resources on this server.
  • ilbcV8Total Total iLBC V8 resource capacity on this server.

  • ilbcV8Utilization Percentage utilization of iLBC V8 resources on this server.

  • l16Total Total l16 resource capacity on this server.
  • l16Utilization Percentage utilization of l16 resources on this server.
  • opusTotal Total OPUS resource capacity on this server.

  • opusUtilization Percentage utilization of OPUS resources on this server.

  • silk16Total – Total Silk16 resource capacity on this server.
  • silk16Utilization – Percentage utilization of Silk8 resources on this server.
  • silk8Total – Total Silk8 resource capacity on this server.
  • silk8Utilization – Percentage utilization of Silk8 resources on this server.
  • toneAllocFailures – Percentage of tone resource allocation failures on this server.
  • toneAvailable – Number of tone resources currently unused and available on this server.
  • toneHighPriorityUtilization - Percentage utilization of tone resources used for high priority calls on this server.
  • toneTotal Total tone resource capacity on this server.
  • toneUtilization – Percentage utilization of tone resources on this server.
  • evsTotal - Total EVS resource capacity on this server.
  • evsUtilization - Percentage utilization of EVS resources on this server.
  • evsT140Total - Total evsT140 resource capacity on this server.
  • evsT140Utilization - Percentage utilization of evsT140 resources on this server.


Ethernet Port

Command Syntax

Code Block
> show table system ethernetPort
	mgmtAdmin 
	mgmtPortStatus
	mgmtStatistics
	packetAdmin 
	packetPortStatus
	packetStatistics
	portMonitorStatus
	portRedundancyGroupStatus 


Command Parameters

Multiexcerpt
MultiExcerptNameEthernet Port Parameters

Ethernet Port Attributes

ParameterDescription
mgmtAdminManagement ports.
mgmtPortStatus

Management port status details.

  • ifIndex – The unique ifIndex of this management NIF
  • linkState – The state of the interface.
    • admnDisabled
    • admnEnabledPortDown
    • admnEnabledPortUp
    • nifCreated
    • nifCreating 
    • null
  • macAddress – The MAC address of the network interface.
  • rxDropped – The number of packets dropped due to no receive buffers.
  • rxErrors – The number of bad packets received
  • rxPackets – The number of received packets.
  • txDropped – The number of packets dropped due to no transmit buffers.
  • txErrors – The number of packet transmit failures.
  • txPackets – The number of transmitted packets.
mgmtStatistics

Management port transmit and receive statistics.

  • rxDropped – The number of packets dropped due to no receive buffers.
  • rxErrors – The number of bad packets received.
  • rxPackets – The number of received packets.
  • txDropped – The number of packets dropped due to no transmit buffers.
  • txErrors  – The number of packet transmit failures.
  • txPackets – The number of transmitted packets.
packetPortStatus

Packet port status details.

  • allocatedBandwidth – The bandwidth (bytes/second) allocated for a particular port for active media streams.
  • bandwidthDeviation – The percentage of deviation of actual bandwidth from allocated bandwidth.
  • bandwidthUsage – The percentage of load (allocatedBandwidth) for a particular port using the formula:
    allocatedBandwidth / maxBandwidth * 100
  • ifIndex – The unique ifIndex of this Packet NIF.
  • linkState – The state of the interface.
    • admnDisabled 
    • admnEnabledPortDown 
    • admnEnabledPortUp 
    • null
  • macAddress – The MAC address of the metwork interface.
  • maxBandwidth – The maximum bandwidth that the port is capable of supporting. For example,

    • For SBC 7000 series platform, 95% of 10 GB port is 1,187,500,000 bytes/second.
  • negotiatedSpeed – The interface speed.
  • rxActualBandwidth – The actual Rx bandwidth, which is used for a particular port (bytes/second).
  • txActualBandwidth – The actual Tx bandwidth, which is used for a particular port (bytes/second).
packetStatistics

Packet port transmit and receive statistics.

  • rxDropped – The number of packets dropped due to no receive buffers.
  • rxErrors – The number of bad packets received.
  • rxPackets – The number of received packets.
  • txDropped – The number of packets dropped due to no transmit buffers.
  • txErrors – The number of packet transmit failures.
  • txPackets – The number of transmitted packets.
portMonitorStatus 

The port monitor status.

  • <ceName> – The SBC server name
  • failures – Current number failures of this port monitor
  • faultState – The fault state of the physical port
    • failed
    • restored
    • unknown
  • linkFailures – The current number of link failures of this port monitor
  • linkState The state of the link monitor configured on this port in the link detection group. The linkState is set to “unknown” if link monitors are not configured.
    • failed
    • restored
    • unknown
  • macAddress – The MAC address associated with the physical port
  • pmName – The name of this port monitor.
  • portName – The name of the physical port.
  • prg – The name of the port redundancy group.
  • role – The role of the physical port
    • active
    • no_role
    • standby
  • state – The state of the physical port
    • down
    • unknown
    • up
portRedundancyGroupStatus

Status of the port redundancy group.

  • <host name> – The server host name.
  • failureCount – Total number of port monitor failures within this port redundancy group.
  • failures – The current number of port monitors within this port redundancy group that have declared themselves failed.

  • ifIndex – The unique ifIndex of this Packet NIF.

  • ifNum The unique ifNum of this Packet NIF.

  • interfaceType Interface Type of this port redundancy group.

    • mgmt
    • pkt
  • portMonitorCount The number of port monitors configured in this port redundancy group.

  • portName The name of physical/logical port.

  • primaryMacAddress The Primary MAC address of the network interface.

  • secondaryMacAddress The Secondary MAC address of the network interface.


Anchor
GPU Status
GPU Status
GPU Status

Shows statistics of GPUs associated with the instance

Info

Applies to SBC SWe only


Command Syntax

Code Block
% show table system gpuStatus
    <server name>
    <deviceName>
	<utilization>
    <gpu index>
    <attribute>
    


Command Parameters

gpuStatus Descriptions

ParameterStatus Names and Descriptions

<server name>

Server name.

<device Name>Displays the hardware product name of the GPU device.
<utilization>Displays the raw NVIDIA utilization metric retrieved from the nvidia-smi command.
<GPU index>Index of the GPU.
<attribute>

Attributes listed below:

  • currentEccMode – Current ECC mode.
  • currentTemperature– Temperature of GPU in degree celsius, -1 is displayed when no data is available.
  • eccErrors– ECC errors, -1 shows no data available.
  • graphicsClockSpeed– Graphics clock speed of GPU in degree celsius, -1 is displayed when no data is available.
  • memoryClockSpeed– Memory clock speed of GPU in degree celsius, -1 is displayed when no data is available.
  • memoryUsage– Memory usage of GPU(Percent), -1 is displayed when no data is available.
  • pendingEccMode– Current ECC mode.
  • shutdownTemperature– GPU Shutdown Temperature in degree celsius, -1 is displayed when no data is available.
  • slowdownTemperature – GPU Slowdown Temperature in degree celsius, -1 is displayed when no data is available.

Note: These attributes are only applicable when GPU traffic profile is set. For non-GPU traffic profiles, -1 is displayed for each attribute.


Anchor
GPUTranscodeStatus
GPUTranscodeStatus
GPU Transcode Status

Shows codec channel capacities on a per GPU device basis. GPU information is system-level; output shows only one entry in case of an HA system. Available only on SWe except S-SBC SWe.

Command Syntax

Code Block
show table system gpuTranscodeStatus

Command Parameters

gpuTranscodeStatus Descriptions

ParameterStatus Names and Descriptions

gpuTranscodeStatus

<system name> – The SBC system name.

  • amrNbTotal – Total AMR–NB resource capacity on GPUs of this server.
  • amrNbUtilization – Percentage utilization of AMR–NB resources on GPUs of this server.
  • amrWbTotal – Total AMR–WB resource capacity on GPUs of this server.
  • amrWbUtilization – Percentage utilization of AMR–WB resources on GPUs of this server.
  • evrc0Total – Total EVRC0 resource capacity on GPUs of this server.
  • evrc0Utilization – Percentage utilization of EVRC0 resources on GPUs of this server.
  • evrcb0Total  Total EVRCB0 resource capacity on GPUs of this server.
  • evrcb0Utilization – Percentage utilization of EVRCB0 resources on GPUs of this server.
  • g722Total – Total G.722 resource capacity on GPUs of this server.
  • g722Utilization – Percentage utilization of G.722 resources on GPUs of this server.
  • g729AbTotal  Total G729A+B resource capacity on GPUs of this server.
  • g729AbUtilization – Percentage utilization of G729A+B resources on GPUs of this server.
  • opusTotal – Percentage utilization of Opus resources on GPUs of this server.
  • opusUtilization  Total Opus resource capacity on GPUs of this server.
  • evsTotal -  Total EVS resource capacity on GPUs of this server.
  • evsUtilization - Percentage utilization of EVS resources on GPUs of this server.
  • gpuAllocation - Displays the overall GPU occupancy in a percentage

Anchor
IP-Policing-uFlowStats
IP-Policing-uFlowStats
IP Policing

Include Page
_OffendersList _Ip_policing
_OffendersList _Ip_policing

Anchor
Offenders List Details
Offenders List Details
IP Policing - Offenders Lists


Multiexcerpt
MultiExcerptNameOffenders List


Panel
bgColortransparent
borderWidth2
titleBGColorpink
titleIP Policing Offenders Lists

ACL Offenders List – The Access Control List policer offenders list.

Aggregate Offenders List – The aggregate policer offenders list.

ARP Offenders List – The ARP policer offenders list.

Bad Ethernet IP Header Offenders List – The bad Ethernet/IP Header policer offenders list. Ethernet/IP headers are considered bad under the following conditions:

  • Only broadcast ARP packets are allowed; all other broadcast packets are considered bad.

  • Anything other than the following unicast/multicast ICMPV6 packets are considered bad.

    • Type 2 (Packet too big)
    • Type 3 (ICMP Time exceeded) Code 0 (hop limit exceeded).
    • Type 128 (ICMPV6 Echo request)
    • Type 129 (ICMPV6 Echo reply)
    • Type 135 Neighbor Solicitation
    • Type 136 Neighbor Advertisement
  • Anything other than the following unicast ICMPV4 packets are considered bad:

    • Type 0 Echo Reply

    • Type 3 Code 4 (Destination unreachable, fragmentation required)

    • Type 8 Echo Request

    • Type 11 Code 0 (Time Exceeded, TTL expired)

  • Only ICMPV6 neighbor discovery packets are allowed under multicast MAC address. Anything else is considered bad.

  • If DestMAC is zero, it is considered a bad packet.

  • Anything other than ethertype (IPV4, IPV6, VLAN) is considered bad.

  • IP Checksum error is considered bad.

  • IP version other than 4 or 6 is considered bad.

  • Bad IP Header length

  • Packet that is not long enough to contain IP header.

  • TTL == 0 is considered bad.

  • IPV4 with options set is considered bad.

  • IPV6 with initial next header field of 0, 60, or 43 is considered bad.

Discard Rule Offenders List – The table of statistics for the discard rule offenders list. For example: ACLi discard rule packets.

IPsec Decrypt Offenders List – The table of statistics for the IPsec Decrypt policer offenders list. For example:

  • Bad IPsec packet

  • Authentication error

  • Invalid SSID

  • IPsec protocol == AH

Media Offenders List – The table of statistics for the media policer offenders list. For example: Media packets exceeding the policing value.

Rogue Media Offenders List – The table of statistics for the rogue media policer offenders list. For example:

  • UDP packets received in the media port range, but the destination UDP port is not allocated for media call
  • Media packets where source port, source address or destination address do not match the allocated media resource

srtpDecryptOffendersList – The table of statistic for SRTP decrypt offenders list.  This contains SRTP packets which failed authentication or were flagged as replay packets. This could indicate malicious media packet attacks or it can be used to troubleshoot "no audio" calls using SRTP.

uFlow Offenders List – The table of statistics for the micro flow policer offenders list. For example: Microflow packet exceeding the policing rate.

Contrasting the Rogue Media Offenders List and the Media Offenders List:

Entries in the Media Offenders List are for allocated media packets that violate the policing rules. The associated call is sending too many media packets. This could indicate a possible “Theft of Service” scenario. Entries in the Rogue Media Offenders List are media packets that the SBC is receiving but no resource is allocated for the packet. This may be a Denial of Service attack or indication that a call was terminated but the other end is still sending media packets.





Multiexcerpt
MultiExcerptNameIPPolicing

IP Policing - uFlowStats Fields

The uFlowStats table contains the following fields:

  • uFlow Index – Index number of this uFlow statistic
  • Source IP Address – Source IP address
  • Destination IP Address – Destination IP address
  • Source IP Port – Source IP port
  • IP Protocol – IP protocol
  • LIF Group Id – LIF group ID
  • Policer Mode – The Policer mode
  • Policer Bucket Size – Number of packets allowed in the Policer bucket
  • Policer Credit Rate – Packet fill rate (packets per second)
  • Agg Policer – The name of the aggregate policer
  • Agg Policer PriorityAggregate policer priority level
  • Packet AcceptThe number of packets accepted by the policer
  • Packet DiscardNumber of packets discarded by the policer
  • Byte AcceptThe number of bytes accepted by the policer

Anchor
IP Policing System Current and Interval Attributes
IP Policing System Current and Interval Attributes
IP Policing - System Current and Interval Statistics

The following table lists fields that appear in both the systemCurStats and systemIntStats tables. The systemIntStats table includes the following additional attributes:

  • number – The interval sequence number. The number of intervals to store are configurable. Refer to Interval Statistics - CLI for configuration details.
  • intervalValid – A setting of 'true' indicates the interval contains valid data during the time interval. Each interval is for a configurable fixed time (default interval is 15 minutes) starting on the hour. For example, if the system starts at 12:05, the first interval at 12:15 will not be valid because it is less than the 15-minute interval. Subsequent intervals will be valid upon meeting the 15-minute time interval. System switch-overs also cause invalid intervals because data is lost during the interval.
  • time – The system up time when the interval statistic is collected for the specified interval.
Info
titleNote

Complete IP Policing information related to threshold levels and duration is available at IP Policing Alarm Profile - CLI.

IP Policing System Current and Interval Attributes

AttributeDescription

aclAcceptPacketCount

The number of accepted packets for the access control list policer.

aclDiscardPacketCount

The number of discarded packets for the access control list policer.

aclMajorAlarmCount

The number of major alarms for the access control list policer.

aclMajorAlarmDuration

The duration of the major alarms in seconds for the access control list policer.

aclMinorAlarmCount

The number of minor alarms for the access control list policer.

aclMinorAlarmDuration

The duration of the minor alarms in seconds for the access control list policer.

aclPeakDiscardRate

The peak discard rate for the access control list policer.

aggregateAcceptPacketCount

The number of accepted packets for the aggregate policer.

aggregateDiscardPacketCount

The number of discarded packets for the aggregate policer.

aggregateMajorAlarmCount

The number of major alarms for the aggregate policer.

aggregateMajorAlarmDuration

The duration of the major alarms in seconds for the aggregate policer.

aggregateMinorAlarmCount

The number of minor alarms for the aggregate policer.

aggregateMinorAlarmDuration

The duration of the minor alarms in seconds for the aggregate policer.

aggregatePeakDiscardRate

The peak discard rate for the aggregate policer.

arpAcceptPacketCount

The number of accepted packets for the ARP policer.

arpDiscardPacketCount

The number of discarded packets for the ARP policer.

arpMajorAlarmCount

The number of major alarms for the ARP policer.

arpMajorAlarmDuration

The duration of the major alarms in seconds for the ARP policer.

arpMinorAlarmCount

The number of minor alarms for the ARP policer.

arpMinorAlarmDuration

The duration of the minor alarms in seconds for the ARP policer.

arpPeakDiscardRate

The peak discard rate for the ARP policer.

badEtherIpHdrDiscardPacketCount

The number of discarded packets for the bad Ethernet/IP Header policer.

badEtherIpHdrMajorAlarmCount

The number of major alarms for the bad Ethernet/IP Header policer.

badEtherIpHdrMajorAlarmDuration

The duration of the major alarms in seconds for the bad Ethernet/IP Header policer.

badEtherIpHdrMinorAlarmCount

The number of minor alarms for the bad Ethernet/IP Header policer.

badEtherIpHdrMinorAlarmDuration

The duration of the minor alarms in seconds for the bad Ethernet/IP Header policer.

badEtherIpHdrPeakDiscardRate

The peak discard rate for the bad Ethernet/IP Header policer.

discardRuleDiscardPacketCount

The number of discarded packets for the discard rule, plus the number of packets that do no match any ACL rule.

discardRuleMajorAlarmCount

The number of major alarms for the discard rule.

discardRuleMajorAlarmDuration

The duration of the major alarms in seconds discard rule.

discardRuleMinorAlarmCount

The number of minor alarms for the discard rule.

discardRuleMinorAlarmDuration

The duration of the minor alarms in seconds for the discard rule.

discardRulePeakDiscardRate

The peak discard rate for the discard rule.

ipSecDecryptAcceptPacketCount

The number of accepted packets for the IPsec Decrypt policer.

ipSecDecryptDiscardPacketCount

The number of discarded packets for the IPsec Decrypt policer.

ipSecDecryptMajorAlarmCount

The number of major alarms for the IPsec Decrypt policer.

ipSecDecryptMajorAlarmDuration

The duration of the major alarms in seconds for the IPsec Decrypt policer.

ipSecDecryptMinorAlarmCount

The number of minor alarms for the IPsec Decrypt policer.

ipSecDecryptMinorAlarmDuration

The duration of the minor alarms in seconds for the IPsec Decrypt policer.

ipSecDecryptPeakDiscardRate

The peak discard rate for the IPsec Decrypt policer.

mediaAcceptPacketCount

The number of accepted packets for the media policer.

mediaDiscardPacketCount

The number of discarded packets for the media policer.

mediaMajorAlarmCount

The number of major alarms for the media policer.

mediaMajorAlarmDuration

The duration of the major alarms in seconds for the media policer.

mediaMinorAlarmCount

The number of minor alarms for the media policer.

mediaMinorAlarmDuration

The duration of the minor alarms in seconds for the media policer.

mediaPeakDiscardRate

The peak discard rate for the media policer.

rogueMediaDiscardPacketCount

The number of discarded packets for the rogue media policer.

rogueMediaMajorAlarmCount

The number of major alarms for the rogue media policer.

rogueMediaMajorAlarmDuration

The duration of the major alarms in seconds for the rogue media policer.

rogueMediaMinorAlarmCount

The number of minor alarms for the rogue media policer.

rogueMediaMinorAlarmDuration

The duration of the minor alarms in seconds for the rogue media policer.

rogueMediaPeakDiscardRate

The peak discard rate for the rogue media policer.

srtpDecryptDiscardPacketCount

The current number of packets discarded by SRTP decrypt discards.

srtpDecryptMajorAlarmCount

The current number of major alarms for the SRTP decrypt discards.

srtpDecryptMajorAlarmDuration

The current duration of the major alarms in seconds for the SRTP decrypt discards.

srtpDecryptMinorAlarmCount

The current number of minor alarms for SRTP decrypt discards.

srtpDecryptMinorAlarmDuration

The current duration of the minor alarms in seconds for the SRTP decrypt discards.

srtpDecryptPeakDiscardRate

 The current peak discard rate for SRTP decrypt discards.
systemNameThe SBC system name.

uFlowAcceptPacketCount

The number of accepted packets for the micro flow policer.

uFlowDiscardPacketCount

The number of discarded packets for the micro flow policer.

uFlowMajorAlarmCount

The number of major alarms for the micro flow policer.

uFlowMajorAlarmDuration

The duration of the major alarms in seconds for the micro flow policer.

uFlowMinorAlarmCount

The number of minor alarms for the micro flow policer.

uFlowMinorAlarmDuration

The duration of the minor alarms in seconds for the micro flow policer.

uFlowPeakDiscardRate

The peak discard rate for the micro flow policer.


License

Command Syntax

Code Block
> show table system
    licenseDomainBundleInfo	
	licenseInfo
	licenseNodeLockedInfo  
	licenseRequired
	licenseStatus 

Command Parameters

Multiexcerpt
MultiExcerptNameLicense Parameters

License Attributes

ParameterDescription

licenseDomainBundleInfo

License details for the domain licenses available on the SBC.

  • activeLicenseMode – The licensing mode currently in use by the SBC
  • bundleName – License bundle name
  • expirationDate – License expiration date
  • featureName – license keys for each licensed feature
  • generationDate – The date the license was generated
  • installDate – The date the license was installed
  • licenseId – License ID
  • lineId – The line ID for the license feature entry
  • purchaseOrderId – The purchase order ID specified when the license was generated
  • usageLimit – Usage limit for the licensed feature

licenseInfo

Available_since
Release12.1.1

The license status for all installed license features or for a specified <featureName> <licenseID> combination.

  • <featureName> – license keys for each licensed feature:
    • DSP-AMRNB
    • DSP-AMRWB
    • DSP-EVRC
    • DSP-EVS
    • DSP-G722
    • DSP-SILK
    • ENCRYPT
    • LB-INSTANCE
    • MARKETPLACE-ROOT
    • MEDIA-PROBE
    • NOTRUF
    • POL-BASE
    • REG-GRACE
    • SBC-1X10GMP
    • SBC-4X1GMP
    • SBC-CAPACITY
    • SBC-CNE-INSTANCE  (For SBC CNe only)
    • SBC-LB
    • SBC-LI
    • SBC-MRF-RTU
    • SBC-NICEREC
    • SBC-P-DCS-LAES
    • SBC-POL-E911
    • SBC-POL-ENUM
    • SBC-POL-RTU
    • SBC-PSX-RTU
    • SBC-RTU
    • SBC-SIP-I
    • SBC-SIP323
    • SBC-SIPREC
    • SBC-SOSBC-RTU
    • SBC-VIDEO
    • SRTP
    • SWE-INSTANCE
    • VDSP-RTU
    • WEBSOCKET
  • <license ID> License identifier
  • expirationDate – The expiration date for a licensed feature
  • inUse – The number of licenses used by the SBC for this feature
  • licenseId – License identifier
  • source – Source of the license (BuiltIn, domain, or nodeLocked)
  • usageLimit – The maximum count allowed for this feature
licenseNodeLockedBundleInfo

License details for the legacy licenses stored on the

Spacevars
0product
.

  • bundleName – License bundle name
  • featureName – license keys for each licensed feature
  • licenseId – License ID
  • expirationDate – License expiration date
  • usageLimit – Usage limit for the license
  • activeLicenseMode – The licensing mode currently in use by the
    Spacevars
    0product
    (domain/nodeLocked)
licenseRequired

Displays the licenseRequired configuration: The configured maximum number of licenses for a particular feature for a node when network-wide domain licensing is in effect.

  • featureNamelicense key for a licensed feature
  • maxCount – The maximum number of licenses the SBC can request from the SLS.

(Applies to 'show table' command only)

NOTE: This attribute only applies if the current licenseMode is "domain."

licenseStatus

The CE license status table describes the current CE license state, for example "dualCe".

  •   cemode


Load Balancing Service

Load Balancing Service (SBC 7000/SWe)

Load Balancing Service status details.

Command Syntax

Code Block
> show table system loadBalancingService
	groupName
	inviteRetargetMode
	leaderStatistics
	leaderStatus
	registerRetargetMode
	resourceInfoStatus

Load Balancing Service Attributes (SBC 7000/SWe)

FieldDescription
groupNameDomain name of the load balancing group.
inviteRetargetModeLoad balancing service mode for INVITEs.
leaderStatistics

Specifies the leader statistics table.

  • <key>
  • leaderElectionAttempts
  • retransmitCount
  • requestTimeoutCount
leaderStatus

Displays the IP address of leader nodes in the cluster.

  • <leader Id>
  • leaderIPAddress
  • state
registerRetargetMode

Specifies the load balancing service mode for REGISTERs (disable, redirect). If set to redirect, new registrations are retargeted, as necessary, to balance the load using SIP 302 "Moved Temporarily" response code.

resourceInfoStatus

Node resource information.

  • <Id>
  • callResourceCount
  • registrationResourceCount


Load Balancing Service (S-SBC)

The following table lists Load Balancing Service status details.

Command Syntax

Code Block
> show table system loadBalancingService
	dspLeaderStatus
	dspResourceCacheStatus
	dspSeedNodeStatus
	groupName
	inviteRetargetMode
	leaderStatistics
	leaderStatus
	policerLeaderStatus
	policerResourceCacheStatus
	policerSeedNodeStatus
	registerRetargetMode
	resourceInfoStatus

Load Balancing Service Attributes (S-SBC)

FieldDescription
dspLeaderStatus

Displays the instance status of the leader nodes in the cluster.

  • <leader Id>
  • leaderIPAddress
  • state
dspResourceCacheStatus

Displays media resource cache information.

  • <node index> – Node ID
  • nodeIpAddress – Node's IP address
  • nodePrivateLifGroupName – Node's private LIF group name
  • nodePrivateLifGroupBandwidth – Available private LIF group bandwidth for this node, in bytes/second
  • nodePrivateLifGroupTtl – The LIF group Time To Live (TTL) value (Number of seconds remaining for the current resource bandwidth information to be valid) for this node
  • nodeCodecUnits – Number of available codec units (at any instant) the SSBC can use to allocate the transcoding resources for an active call
  • nodeCodecCapabilities – Displays the supported codec and corresponding codec units for this node
  • nodeCodecCapabilitiesExtn – Displays additional supported codec and corresponding codec units than what is listed under nodeCodecCapabilities
  • nodeCodecTtl – The codec TTL value (Number of seconds the present codec is available) for this node
  • nodeToneUnits – The percentage of DSP cores available for the present tone
  • nodeToneTtl – Number of seconds the present tone is available
dspSeedNodeStatus

Displays cluster seed node status.

  • <Seed ID>
  • seedNodeIpAddress
groupNameDomain name of the load balancing group.
inviteRetargetMode

Specifies the load balancing service mode for INVITEs. Enables load balancing for initial INVITE requests. 

If set to redirect, calls may get retargeted using SIP 302 to balance the load.

  • disabled
  • redirect
leaderStatistics

Specifies the leader statistics table.

  • <key>
  • leaderElectionAttempts
  • retransmitCount
  • requestTimeoutCount
leaderStatus

Displays the IP address of leader nodes in the cluster.

  • <leader Id>
  • leaderIPAddress
  • state
policerLeaderStatus

Displays policer cluster leader node status.

  • <leader Id>
  • leaderIPAddress

  • state 
policerResourceCacheStatus

Displays policer media resource cache information.

  • <node index>
  • nodeIpAddress
  • nodeLifGroupName
  • nodeLifGroupisPrivate
  • nodeLifGroupBandwidth
  • nodeLifGroupTtl
policerSeedNodeStatus

Displays policer cluster seed node status.

  • <leader Id>
  • seedNodeIPAddress
registerRetargetMode

Specifies the load balancing service mode for REGISTERs (disable, redirect). If set to redirect, new registrations are retargeted, as necessary, to balance the load using SIP 302 "Moved Temporarily" response code.

resourceInfoStatus

Node resource information.

  • <leader Id>
  • callResourceCount
  • registrationResourceCount 


Load Balancing Service (M-SBC)

Load Balancing Service status details.

Command Syntax

Code Block
> show table system loadBalancingService
	dspResourceCacheStatus
	groupName
	leaderStatistics
	leaderStatus
	policerResourceCacheStatus
	privateIpInterfaceGroupName

Load Balancing Service Attributes (M-SBC)

FieldDescription
dspResourceCacheStatus

Displays media resource cache information.

  • <node index>
  • nodeIpAddress
  • nodePrivateLifGroupName
  • nodePrivateLifGroupBandwidth
  • nodePrivateLifGroupTtl
  • nodeCodecUnits
  • nodeCodecCapabilities 
  • nodeCodecCapabilitiesExtn 
  • nodeCodecTtl
  • nodeToneUnits
  • nodeToneTtl
groupNameDomain name of the load balancing group.
leaderStatistics

Specifies the leader statistics table.

  • <key>
  • leaderElectionAttempts
  • retransmitCount
  • requestTimeoutCount
leaderStatus

Displays the IP address of leader nodes in the cluster.

  • <leader Id>
  • leaderIPAddress
  • state
policerResourceCacheStatus

Displays policer media resource cache information.

  • <node index>
  • nodeIpAddress
  • nodeLifGroupName
  • nodeLifGroupisPrivate
  • nodeLifGroupBandwidth
  • nodeLifGroupTtl
privateIpInterfaceGroupName

<name> – The name of the Private IP Interface Group used by M-SBC/T-SBC to communicate with MRF.


Management IP Interface Group

Command Syntax

Code Block
> show table system mgmtIpInterfaceGroup <mgmt group name> mgmtIpInterface
 
> show table system mgmtIpInterfaceGroup <mgmt group name> mgmtIpInterfaceStatus

Management IP Interface Group Parameters

ParameterDescription

<mgmt group name>

Management IP interface group name.
mgmtIpInterface

The management IP interfaces in this management IP interface group.

  • ceName – The name of the SBC server used by this management IP interface.

  • ipAddressV4 – The IPV4 Address of the Interface

  • ipAddressV6 – The IPV6 Address of the Interface

  • portName – The port number used by this IP interface.

  • prefixV4 – The IPV4 subnet prefix of this Interface.

  • prefixV6 – The IPV6 subnet prefix of this Interface.

  • state – Administrative state of the interface.

mgmtIpInterfaceStatus

The status of the IP interfaces in this IP interface group.

  • ifindex – The interface index of the management interface.
  • operStatus – The actual status of the management interface (disabled, enabledPortDown, enabledPortUp, interfaceCreated, interfaceCreating, resourceAllocated, resourceAllocating).
  • rxPackets – Number of packets received on this management interface.
  • txPackets – Number of packets sent on this management interface.


Network Processor

Include Page
_InternalDebugOnly
_InternalDebugOnly

Noprint

Toggle Cloak
Click to expand...


Cloak

Command Syntax

Command Parameters

Network Processor ParametersINLINE

Network Processor Statistics Attributes

 AttributeDescription

annStatistics

Announcement statistics:

  • npId – Network processor ID
  • numEnable – Current number of announcements enabled
  • numPlaying – Current number of announcements playing
  • pktsToDsp – Total number of packets sent to DSP
  • pktsToEth – Total number of packets sent to Ethernet port
  • stop – If set, all current announcements will gradually stop
  • numAnnIndToHost – Number of indications sent
  • numSlip – Number of announcements with interval slip
  • outQcongest – Total number of errors
  • timerAddErr – Number of timer schedule errors
  • LastErrAid – Last Announcement ID for timerAddErr
  • indWorkNull – No work entry counter for announcement indication
  • indBufNull – Buffer null counter for announcement indication
  • annWorkNull – No work entry counter for announcement
  • annBufNull – Buffer null counter for announcement
defragStatistics

Packet defragmentation statistics:

  • npId – Network processor ID
  • reassembleRequired – Total fragment context created for packets requiring reassembly
  • goodFragments – Number of good fragments processed
  • reassembleComplete – Good complete datagram
  • inUse – Current number of defrag contexts used
  • errorPkt – Bad fragment packet, duplicate, too many fragments, bad offset, packet too big
  • timeoutCnt – Number of timeouts that have occurred
  • badInputBuffer – Bad input buffer
  • badDefragPool – Invalid buffer pool count
  • badTimeoutList – Invalid age list for timeout maintenance
  • tooManyFrags – Number of contexts exceeding maximum fragments allowed
  • noDefragMatch – Number of fragments failed to find frag context, out of fragment context
digitStatistics

Digit insertion statistics

  • npId – Network processor ID
  • startCnt – Total start count
  • stopCnt – Total stop count
  • modifyCnt – Total modify count
  • earlyStartCnt – Total early start (start before end) count
  • cancelRescheduleCnt – Total cancel and reschedule count
  • badStopCnt – Total bad stop count
  • mediaNotEnabledCnt – Total digit commands issued for disabled media flow
  • uknownStateCnt – total unknown state count
  • timerCancelFailCnt – Total failure count of cancelling timer bucket
  • timerAddFailCnt – Total failure count of adding timer bucket
  • failedGetWork – Unable to get work entry to send digit
  • failedGetPktBuf – Unable to get packet buffer to send digit
rtcpGenStatistics

RTCP Generation statistics.

  • npId – Network processor ID
  • startCnt – Total start count
  • stopCnt – Total stop count
  • modifyCnt – Total modify count
  • haltCnt – Total number of halt commands
  • restartCnt – Total number of restart commands
  • cancelCnt – Total cancel and no–schedule count
  • totalScheduled – Total RTCP packets scheduled
  • lastScheduled – Last RTCP packet timer scheduled
  • earlyStartCnt – Total early start (start before end) count
  • badStopCnt – Total bad stop count
  • badModifyCnt – Total RTCP modify but RTCP is not enabled count
  • badGenType – Unsupported gen type passed in command
  • doubleEnableCnt – Enable command for an already enabled RTCP
  • timerCancelFailCnt – Total failure count of cancelling timer bucket
  • timerAddFailCnt – Total failure count of adding timer bucket.
  • failedGetWork – Unable to get work entry to send RTCP
  • failedGetPktBuf – Unable to get packet buffer to send RTCP
  • numWorkAtDiscard – RTCP not generated because state at discard

  • numWorkAtDisabled – RTCP not generated because state at disabled
  • numWorkAtHalt – RTCP not generated because state at halt
  • lastBadRtcpGen – Last RTCP that was not generated



Network Segment Table

Network Segment Instance in the CNF solution

Command Syntax

Code Block
>show table system networkSegmentTable
	name
	networkSegmentType
	pfeID
	vlanID
	primary
	secondary
	networkInterfaceName
	prefixV4
	prefixV6

Command Parameters

Multiexcerpt include
MultiExcerptNameNetwork Segment All Types
PageWithExcerptNetwork Segment Table - CLI

NTP

NTP services management

Command Syntax

Code Block
> show table system ntp
	keys
	peerStatus
	serverAdmin
	systemStatus
	timeZone

Command Parameters

Multiexcerpt
MultiExcerptNameNTP Parameters

NTP Attributes

ParameterDescription
keys

Displays NTP server key details.

  • keyId
  • keyType
  • keyValue
peerStatus

Displays status information about each NTP peer.

  • ceName – The name of this SBC server.
  • ipAddress – IP address of the CE.
  • state – the state of the NTP peer (insynce, outofsync, reachable).
  • stratum – A number representing the distance from the reference clock, starting at "0". Stratum 16 represents that a device is out of sync.
  • refTime – The time this NTP peer was last updated.
serverAdmin

Displays information about each NTP Server configured to provide network time.

  • ipAddress – The IP address of this NTP server.
  • version – The NTP version of this NTP server.
  • minPoll – The minimum poll interval to this NTP server.
  • maxPoll – The maximum poll interval to this NTP server.
  • state – The configured state of the NTP server entry.
systemStatus

Displays system status information about NTP.

  • ceName – The name of this SBC server.
  • clock – The SBC regularly checks system time. This field represents the system time as of the last check by SBC, not the actual system time.
  • refTime – The time this system was last updated.

timeZone

This table contains Time Zone configuration. Fields include:

  • name – System name.
  • zone – The current time zone.

NOTE: In an HA configuration, the Active and Standby system times and refTimes will not match in the results of this command because SBC updates NTP data independently.


Policy Server

Softswitch servers and client services status/statistics details.

Command Syntax

Code Block
> show table system policyServer
	globalConfig  
	localServer
	policyServerStatus
	remoteServer

Command Parameters

Multiexcerpt
MultiExcerptNamePolicy Server Parameters

Policy Server Attributes

 AttributeDescription
globalConfig

Defines global configuration applicable to all policy servers.

  • congestionControl – The SBC throttles the sending or policy requests to either active or standby PSX when this field is enabled.
  • mgmtInterfaceGroup – The Management Interface Group to use for communicating with external PSX.
  • reconnectTimeout – The timer parameter for re-attempting connection to a Policy Server that is in the enabled state in seconds.
  • switchOverMode – (automatic or manual) This setting determines how the policy server is set to ACTIVE after a switchover.
  • type – Interface type supported by policyServer.
localServer

Local (embedded) policy server configuration.

  • action – The action for the operation mode for this trunk group
  • keepAliveTimer – The time in seconds between sending Keep Alive indications to the internal Policy Server.
  • mode – Assignment of the Policy Server to have the active, standby, out of service or alternate role.
  • retries – The maximum number of retransmission attempts for a transaction on this Policy Server.
  • retryTimer – The time in milliseconds that the SBC waits for a response from the local Policy Server.
  • state – Administrative state of the softswitch server.
  • transactionTimer – The time in milliseconds that the SBC waits for a response from the Policy Server after sending it a transaction request.
policyServerStatus

Policy Server status table. Fields include:

  • allowancePercent – The number of SBC policy requests allowed by PSX. For example, an allowance of 75%, means that the SBC is skipping one out of every four policy requests. This allowance is provisioned on the PSX and enforced on the SBC when PSX Congestion Control is enabled.
  • averageTransactionTime – Records the average time taken in milliseconds for a softswitch transaction.

  • congestionLevel – The PSX congestion level.

  • dataRequests – The cumulative number of data requests received from the softswitch.

  • index – Identifies the softswitch entry.

  • interfaceIpAddress – Identifies the IP address the SBC uses to communicate with the PSX for this Policy Server.
  • ipAddress – IP Address of the softswitch server.

  • negotiatedVersion – The lowest negotiated protocol version between the gateway and all the active and alternate softswitches.

  • operState – Operational state of the softswitch.

  • queriesSkippedAndRejected – The cumulative number of rejected Policy Requests while the active PSX is congested and a standby PSX is either congested or not available.

  • queriesSkippedAndServiced – The cumulative number of Policy Requests serviced by the standby PSX while the active PSX experienced congestion.

  • redirectRequests – The cumulative number of redirect requests received from the softswitch.

  • releaseRequests – The cumulative number of release-call requests received from the softswitch.

  • serverReconnects – The number of successful reconnections between the gateway and the softswitch.

  • transactionCompleted – The number of successful transactions between the gateway and the softswitch.

  • transactionFailedAttempts – The number of unsuccessful transactions between the gateway and the softswitch.

  • transactionRetryAttempts – The number of transaction retries between the gateway and the softswitch.

  • version – The negotiated protocol version between the gateway and the softswitch.

remoteServer

Table of softswitch remote server configurations. Fields include:

  • name – Remote server name.
  • ipAddress – IP adddress of the remote server.
  • portNumber – The IP port number of the softswitch server.
  • state – Administrative state of the softswitch server.
  • mode – Policy Server mode (active, standby, out of service or alternate role).
  • action – The method by which queued transactions are processed when oper-state goes to standby or out-of-service. Possibilities include:
  • dryup all queue entries are processed to completion unless retries expires.
  • force – all queue transactions are dropped immediately.
  • transactionTimer – The time in milliseconds that the SBC waits for a response from the Policy Server after sending it a transaction request.
  • keepAliveTimer – The time in seconds between sending Keep Alive indications to the Policy Server.
  • retryTimer – The time in milliseconds that the SBC waits for a response from the Policy Server after retransmitting the transaction request.
  • retries – The maximum number of retransmission attempts for a transaction on this Policy Server.
  • subPortNumber – The port number assigned for the IP address of the Policy Server for the specific purpose of communicating subscriber data.


Security

Security management status/statistics details.

Command Syntax

Code Block
> show table system security
	certExpiryCheck
	hashEventLogs
    ipsec
	ocspProfileUses
	ocspStatistics
	pki


Command Parameters

Multiexcerpt
MultiExcerptNameSecurity Parameters

Security Attributes

ParameterDescription
certExpiryCheck

Checks for expired certificates, trust anchor validity, and if certificates have been revoked if OSCP is enabled. Fields include:

  • certReCheckRate – The rate, in hours, to recheck certificates for TLS sessions.
  • expirationPeriodicWarning – Interval of the periodic warnings in days generated after the certificate has reached the expiry threshold.
  • expiryWarningThreshold – The number of days before generating a warning for a certificate nearing expiry.
hashEventLogsShows the existence of an entry in the PrivateKeyName fields. If there is a PrivateKeyName entry displayed, this indicates that a private key is configured.
ipsec

IPsec configuration.

  • ikeDpdInterval – The Dead Peer Detection interval.
  • ikeRetransmitInterval – The IKE retransmit interval period in seconds.
  • ikeRetrasmitCount – The number of IKE retransmits.
ocspProfileUses

 This table contains OCSP profile usage status. Fields include:

  • ocspName
  • tlsName
  • ocspTlsRefNum
ocspStatistics 

This table contains OCSP Statistics. Fields include:

  • ocspInternalErrors – Number of internal error responses.
  • ocspMalformedRequests – Number of malformed request responses.
  • ocspRepondersUnreachable – Number of times OCSP responders are unreachable.
  • ocspRequestAttempts – Number of OCSP request attempts that have been made.
  • ocspResponseTimeouts – Number of times OCSP response timeouts are encountered.
  • ocspResponsesGood – Number of OCSP Responses received with 'Good' status.
  • ocspResponsesRevoked – Number of OCSP Responses received with 'Revoked' status.
  • ocspResponsesUnknown – Number of OCSP Responses received with 'Unknown' status.
  • ocspSigRequired – Number of 'sigRequired' responses.
  • ocspTryLaters – Number of 'tryLater' responses.
  • ocspUnauthorized – Number of unauthorized responses.
pki
  • certStatistics– Certificate statistics.
    • caCerts – Number of installed CA/remote certificates.
    • localCerts – Number of installed local certificates.
  • certificate – Collection of certificates configured on the
    Spacevars
    0product
    .
    • encoding – The encoding type of the certificate.

    • fileName – The certificate content file name

    • passPhrase – Pass-phrase to decrypt RSA private key in PKCS12 file.

    • state – The administration state of this certificate.

    • status – The status of the certificate.

      • duplicate – The same certificate already exists in the database.
      • expired – The current date is outside of the certificate's 'Validity' range (before and after dates). 
      • failed – General error (Example: bad key length)
      • parse-error – Certificate parsing failed (Example: password verification failed)
      • success – Certificate was successfully added.

    • type – The type of the certificate:

      • remote – certificate is imported from remote location.

      • local – certificate is used locally.

      • local-internal – local certificate with private key generated on the

        Spacevars
        0product
        .


SLB

Code Block
> show table system slb
	commInterface
	globalUtilization 
	inviteReqTimeout
	nonInviteReqTimeout
	overloadControlOptions
	regReqTimeout
	sipClientCurrentStatistics
	sipClientIntervalStatistics
	sipClientStatistics
	sipClientStatus 

Command Parameters

SLB Parameters

ParameterDescription
commInterface

Defines the communication interface for SLB traffic.

globalUtilizationThe Global Utilization threshold on the SLB to generate an alarm. Range is 1-100.
inviteReqTimeoutINVITE transaction timeout on the SLB.
nonInviteReqTimeoutNon INVITE transaction timeout on the SLB.
overloadControlOptions
  • neverRetry - Defines parameters affecting the peer overload control mechanism for the SLB traffic towards the SBCs
    • enabled
    • disabled (default)
  • utilizationOverride - The number of registrations (RCBs) allowed. The Utilization value configured on the SBC to override the weight of the SBC on the SLB.
    • disabled (default)
    • 0-100
regReqTimeout Registration transaction timeout on SLB.
sipClientCurrentStatistics

The current statistics of SIP clients registered with the SLB.

  • RegistrationReceived
  • RegistrationFailed
  • RegistrationSent
  • RegistrationRedirected
  • NoRegAffinityRedirectedCall
  • NoInstanceAsCallFailed
sipClientIntervalStatistics

The interval statistics of SIP clients registered with SLB.

  • RegistrationReceived
  • RegistrationFailed
  • RegistrationSent
  • RegistrationRedirected
  • NoRegAffinityRedirectedCall
  • NoInstanceAsCallFailed
sipClientStatistics 

The statistics of SIP clients registered with SLB.

  • RegistrationReceived
  • RegistrationFailed
  • RegistrationSent
  • RegistrationRedirected
  • NoRegAffinityRedirectedCall
  • NoInstanceAsCallFailed
sipClientStatus The current status of SIP clients registered with the SLB.


SWe

SWe-related status/statistics details.

sweActiveProfile

This table contains the name of active profile and time-stamp of profile activation.

Command Syntax

Code Block
> show table system sweActiveProfile

Command Parameters

SWe Active Profile Parameters

ParameterDescription
nameSWe Active Profile name
stateChangeTimeThe time-stamp of profile activation


Command Example

Code Block
show table system sweActiveProfile
name            standard_passthrough_profile;
stateChangeTime 2017-11-13T10:56:16-00:00;

sweCapacityEstimate

This table contains the capacity estimates for all standard and custom profiles.

Command Syntax

Code Block
> show table system sweCapacityEstimate

Command Parameters

SWe Capacity Estimate Parameters

Parameter

Description

nameSWe Active Profile name
Estimated Session CapacityEstimated number of sessions supported in the system.
Estimated Num SubcribersEstimated number of subscribers supported in the system.
Estimated CPSEstimated maximum calls per second (cps) supported in this system.
Estimated Registration CapacityEstimated maximum registrations/sec supported in this system.
Estimated Refresh Register CapacityEstimated maximum refresh registrations/sec supported in this system.
Estimated Protected PPSEstimated DOS PPS protected by the system, the unit is million packets per second.
Max Passthrough SessionsEstimated maximum passthrough sessions.
Max Crypto SessionsEstimated maximum crypto sessions.
Estimated TX PPSEstimated transmitted PPS for estimated sessions
Estimated RX PPSEstimated received PPS for estimated sessions


Command Example

Code Block
> show table system sweCapacityEstimate
                                                                              ESTIMATED
                                 ESTIMATED ESTIMATED             ESTIMATED    REFRESH  ESTIMATED MAX         MAX
                                 SESSION   NUM         ESTIMATED REGISTRATION REGISTER PROTECTED PASSTHROUGH CRYPTO   ESTIMATED ESTIMATED
NAME                             CAPACITY  SUBSCRIBERS CPS       CAPACITY     CAPACITY PPS       SESSIONS    SESSIONS TX PPS    RX PPS
-----------------------------------------------------------------------------------------------------------------------------------------
default                          1496      65536       72        0            0        0.15      1500        656      0.15      0.15
standard_slb_profile             5180      65536       144       0            0        0.15      0           0        0.0       0.0
standard_msbc_profile            1497      65536       144       0            0        0.15      1500        656      0.15      0.15
standard_callmix_profile         1496      65536       72        0            0        0.15      1500        656      0.15      0.15
standard_gpu_isbc_profile        -         -           -         -            -        -         -           -        -         -
standard_gpu_tsbc_profile        -         -           -         -            -        -         -           -        -         -
standard_signaling_profile       5180      65536       144       0            0        0.15      0           0        0.0       0.0
standard_passthrough_profile     1496      65536       144       0            0        0.15      1500        656      0.15      0.15
standard_transcoding_profile     318       65536       72        0            0        0.15      1500        656      0.03      0.03
standard_highcps_callmix_profile 1487      65536       144       0            0        0.15      1500        656      0.15      0.15

sweCodecMixProfile

This table contains the standard codec mix profiles.

Command Syntax

Code Block
> show table system sweCodecMixProfile

Command Parameters

SWe Codec Mix Profile Parameters

Parameter

Description

codecMixProfileNameThe codec mix profile name.
codecThe codec used by the standard profile.
pTimePacketization time in milliseconds.
percentage

The percentage allocated for each codec mix profile.

NOTE: The sum of codec mix profile entries must equal 100.


Command Example

Code Block
show table system sweCodecMixProfile
CODEC MIX
PROFILE NAME    CODEC  PTIME  PERCENTAGE
------------------------------------------
G711_20ms       g711   p20    100
G711_G729_20ms  g711   p20    50
G711_G729_20ms  g729   p20    50

sweConfigProfileSelection

The table sweConfigProfileSelection lists the configured provisioning profile.

Command Syntax

Code Block
> show table system sweConfigProfileSelection name

Command Parameters

SWe Config Profile Selection Parameters

Parameter

Description

name

This parameter indicates the name of the configuration provisioning profile.

The options are:

  • large: Indicates the profile that is applicable to the VM RAM >=18 GiB.
  • small (Default): Indicates the profile that is applicable to the VM RAM >=10 GiB.
  • extrasmall: the profile that is applicable when the VM RAM is between 6 and 10 GiB.

NoteWhen an instance comes up in an environment which has between 6 and 10 GB of memory, the value for sweConfigProfileSelection is automatically set to extrasmall. It is not valid to reconfigure a deployment from one of the larger sizes (small or large) to the extrasmall size.

For definitions of large and small provisioning limits, refer to SBC Provisioning Limits
For definitions of extrasmall provisioning limits, refer to Small SBC SWe Deployment Characteristics.


Command Example


Code Block
> show table system sweConfigProfileSelection name
name large;
[ok]


sweProcessorCapacity

This table contains the relative performance indices of the underlying processor for different functionalities such as crypto, passthrough, signaling and transcoding as compared to 2690v2 processor (with the recommended Host settings). The performance indices are all 100 for base processor. Any index value lower than 100, means the underlying processor is poorer than 2690v2 with respect to that functionality and vice versa.

Command Syntax

Code Block
> show table system sweProcessorCapacity

Command Parameters

SWe Processor Capacity Parameters

Parameter
Description
cryptoIndexCrypto index calculated by the startup scripts.
passthroughIndexPass-through index calculated by the startup scripts.
signalingIndexSignaling index calculated by the startup scripts.
transcodeIndexTranscode index calculated by the startup scripts.


Command Example

Code Block
> show table system sweProcessorCapacity
cryptoIndex      94;
passthroughIndex 95;
signalingIndex   93;
transcodeIndex   98;

sweTrafficProfiles

This table contains the standard profiles and their fixed call mix.

Command Syntax

Code Block
> show table system sweTrafficProfiles 

Command Parameters

SWe Traffic Profiles Parameters

Parameter

Description

Name

SWe Active Profile name

Call Hold TimeAverage Call Hold Time of the call load
Is Access If true, deployment is an access deployment
BHCA per SubscriberBHCA per subscriber
Internal Refresh TimerInternal refresh timer in seconds
External Refresh TimerExternal refresh timer in seconds
Direct Media PercentThe percentage of call load that is Direct Media
Transcode PercentThe percentage of call load that is transcoded call
Passthrough Codec ProfileThe name of the pass-through codec profile
Transcoding Codec ProfileThe name of the transcoding codec profile
Crypto PercentThe crypto percentage refers to the number of legs that are encrypted
Tones PercentThe number of legs that get tones treatment
Processor Capability Index OverrideIf true, index overriding is disabled and the overrideIndexValue can be entered
Processor Capability Index Override ValueThe value of overrideIndexValue field

Use GPU for Transcoding

Specifies the type of transcoding: GPU (true) or CPU (false)

Sig Cost Factor

A signaling cost factor to use during capacity estimation.

Media Cost Factor

A media cost factor to use during capacity estimation.

Tx PPS factor

 A transmitted (tx) PPS factor to use during capacity estimation.

Rx PPS Factor

A received (rx) PPS factor to use during capacity estimation.


Command Example

Code Block
> show table system sweTrafficProfiles
                                                                                                                                                               PROCESSOR
                                                                                                                                                   PROCESSOR   CAPABILITY
                                  CALL                      INTERNAL  EXTERNAL  DIRECT              PASSTHROUGH                                    CAPABILITY  INDEX                    SIG     MEDIA
                                  HOLD  IS      BHCA PER    REFRESH   REFRESH   MEDIA    TRANSCODE  CODEC        TRANSCODING     CRYPTO   TONES    INDEX       OVERRIDE    USE GPUFOR   COST    COST    TX         RX
NAME                              TIME  ACCESS  SUBSCRIBER  TIMER     TIMER     PERCENT  PERCENT    PROFILE      CODEC PROFILE   PERCENT  PERCENT  OVERRIDE    VALUE       TRANSCODING  FACTOR  FACTOR  PPSFACTOR  PPSFACTOR
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
default                           100   false   -           -         -         0        2          G711_20ms    G711_G729_20ms  0        0        false       -           false        1.0     1.0     1.0        1.0
standard_slb_profile              100   false   -           -         -         100      0          -            -               0        0        false       -           false        1.0     1.0     1.0        1.0
standard_msbc_profile             150   false   -           -         -         0        0          G711_20ms    -               0        0        false       -           false        1.0     1.0     1.0        1.0
standard_callmix_profile          100   false   -           -         -         0        10         G711_20ms    G711_G729_20ms  0        0        false       -           false        1.0     1.0     1.0        1.0
standard_gpu_isbc_profile         100   false   -           -         -         0        100        -            G711_G729_20ms  0        0        false       -           false        1.0     1.0     1.0        1.0
standard_gpu_tsbc_profile         100   false   -           -         -         0        100        -            G711_G729_20ms  0        0        false       -           false        1.0     1.0     1.0        1.0
standard_signaling_profile        100   false   -           -         -         100      0          -            -               0        0        false       -           false        1.0     1.0     1.0        1.0
standard_passthrough_profile      100   false   -           -         -         0        0          G711_20ms    -               0        0        false       -           false        1.0     1.0     1.0        1.0
standard_transcoding_profile      100   false   -           -         -         0        100        -            G711_G729_20ms  0        0        false       -           false        1.0     1.0     1.0        1.0
standard_highcps_callmix_profile  25    false   -           -         -         0        0          G711_20ms    -               0        0        false       -           false        1.0     1.0     1.0        1.0

General Command Examples

To view installed licenses:

none
Noprintexpand

Toggle Cloak
Click to expand...

Cloak

To view the call count status for the server before a switchover:

Info

During a switchover call history of only stable calls are maintained. In ‘callCountStatus’ table, all counters except STABLE CALLS are reset to zero when there is a switchover (either force or manual).

Noprint

Toggle Cloak
Click to expand...

Cloak
Code Block
languagenone
> show table system licenseInfo
                  LICENSE                    USAGE               IN
FEATURE NAME      ID       EXPIRATION DATE   LIMIT   SOURCE      USE
----------------------------------------------------------------------
SRTP              3772     2025-12-31-05:00  10000   nodeLocked  0
NOTRUF            3772     2025-12-31-05:00  1       nodeLocked  0
SBC-LB            3772     2025-12-31-05:00  10000   nodeLocked  0
SBC-LI            3772     2025-12-31-05:00  1       nodeLocked  0
DSP-EVS           3772     2025-12-31-05:00  10000   nodeLocked  0
ENCRYPT           3772     2025-12-31-05:00  10000   nodeLocked  0
SBC-RTU           3772     2025-12-31-05:00  150000  nodeLocked  0
DSP-EVRC          3772     2025-12-31-05:00  10000   nodeLocked  0
DSP-G722          3772     2025-12-31-05:00  1       nodeLocked  0
DSP-SILK          3772     2025-12-31-05:00  10000   nodeLocked  0
POL-BASE          0000                       1       BuiltIn     0
VDSP-RTU          3772     2025-12-31-05:00  10000   nodeLocked  0
DSP-AMRNB         3772     2025-12-31-05:00  10000   nodeLocked  0
DSP-AMRWB         3772     2025-12-31-05:00  10000   nodeLocked  0
REG-GRACE         3772     2025-12-31-05:00  10000   nodeLocked  0
SBC-SIP-I         3772     2025-12-31-05:00  1       nodeLocked  0
SBC-VIDEO         3772     2025-12-31-05:00  10000   nodeLocked  0
WEBSOCKET         3772     2025-12-31-05:00  10000   nodeLocked  0
SBC-4X1GMP        3772     2025-12-31-05:00  1       nodeLocked  0
SBC-SIP323        3772     2025-12-31-05:00  1       nodeLocked  0
SBC-SIPREC        3772     2025-12-31-05:00  10000   nodeLocked  0
LB-INSTANCE       3772     2025-12-31-05:00  1       nodeLocked  0
MEDIA-PROBE       3772     2025-12-31-05:00  1       nodeLocked  0
SBC-1X10GMP       3772     2025-12-31-05:00  1       nodeLocked  0
SBC-MRF-RTU       3772     2025-12-31-05:00  10000   nodeLocked  0
SBC-NICEREC       3772     2025-12-31-05:00  10000   nodeLocked  0
SBC-POL-RTU       3772     2025-12-31-05:00  10000   nodeLocked  0
SBC-PSX-RTU       3772     2025-12-31-05:00  10000   nodeLocked  0
SBC-CAPACITY      0000                       0       BuiltIn     0
SBC-POL-E911      3772     2025-12-31-05:00  1       nodeLocked  0
SBC-POL-ENUM      3772     2025-12-31-05:00  1       nodeLocked  0
SWE-INSTANCE      3772     2025-12-31-05:00  1       nodeLocked  0
SBC-SOSBC-RTU     3772     2025-12-31-05:00  10000   nodeLocked  0
SBC-P-DCS-LAES    3772     2025-12-31-05:00  1       nodeLocked  0
MARKETPLACE-ROOT  3772     2025-12-31-05:00  1       nodeLocked  0
 


To view the call count status for the server before a switchover:

Info

During a switchover call history of only stable calls are maintained. In ‘callCountStatus’ table, all counters except STABLE CALLS are reset to zero when there is a switchover (either force or manual).

Expand
Code Block
languagenone
show table global callCountStatus
                                                     ACTIVE  STABLE         TOTAL                TOTAL
                                                     CALLS   CALLS          CALLS  TOTAL CALLS   CALLS
     CALL      CALL         ACTIVE  STABLE  CALL     NON     NON     TOTAL  NON    EMERG         EMERG
KEY  ATTEMPTS  COMPLETIONS  CALLS   CALLS   UPDATES  USER    USER    CALLS  USER   ESTABLISHING  STABLE
---------------------------------------------------------------------------------------------------------
all  7         3            0       0       3        0       0       0      0      0             0
 


To switch over the management applications and restart “all” the applications:

Expand
Code Block
languagenone
request system admin sbxsvtha switchover
This command will switchover the management applications and 
	restarts 'all' the applications on currently active 
	server. Do you want to proceed (yes/no) yes
Proceeding result success reason Performing Switchover...
 


To view

Spacevars
0product
daughter board status (SBC 7000 results shown):

Expand
Code Block
languagenone
show table system daughterBoardStatus
                                                                             IMAGE
                                                                              LOAD
SERVER        DAUGHTER           PRODUCT                         OPERATIONAL  FAILURE  FPGA
NAME    SLOT  BOARD ID  PRESENT  NAME     SERIAL NUM  PART NUM   STATUS       COUNT    VERSION
------------------------------------------------------------------------------------------------
TUNAA   1     FRU_DSP1  true     DSPLB    4151130087  811-41600  enabled      0
TUNAA   2     FRU_DSP2  true     DSPLB    4151130102  811-41600  enabled      0
TUNAA   3     FRU_DSP3  false    Unknown  Unknown     Unknown    disabled     0
TUNAA   4     FRU_DSP4  false    Unknown  Unknown     Unknown    disabled     0
 


 Two maintenance fields apply in this view:

  • IMAGE LOAD FAILURE COUNT – Number of module boot failures since the last successful module boot, for use during diagnostic testing of a potentially failed module.
  • FPGA VERSION – A card’s programmed firmware version (using FPGA build date).
Info
titleNote

The maintenance fields IMAGE LOAD FAILURE COUNT and FPGA VERSION do not apply to SPS100 cards.


To view the synchronization status of the system as a table:

Expand
Code Block
languagenone
show table system syncStatus
SYNC MODULE             STATUS
---------------------------------------
Policy Data             syncCompleted
Configuration Data      syncCompleted
Call/Registration Data  syncCompleted
 


To view the front panel LED status of the system:

Expand
Code Block
languagenone
show table system ledStatus
SERVER 	LED 	LED       LED
NAME 	TYPE 	STATE     COLOR
-------------------------------
Irving 	Alarm 	on 	      amber
Irving 	Power 	on 	      green
Irving 	Active 	on 	      amber
Irving 	Status 	on 	      green
Irving 	Locator blinking  none
 


To view fan status (example is for

Spacevars
0series2
):

Expand
Code Block
languagenone
show table system fanStatus

SERVER NAME    FAN ID    SPEED    
--------------------------------------------
bf024.eng.com  FAN1/BOT  7168 RPM 
bf024.eng.com  FAN1/TOP  8192 RPM 
bf024.eng.com  FAN2/BOT  9728 RPM 
bf024.eng.com  FAN2/TOP  9728 RPM 
bf024.eng.com  FAN3/BOT  7168 RPM 
bf024.eng.com  FAN3/TOP  7168 RPM 
bf024.eng.com  FAN4/BOT  8192 RPM 
bf024.eng.com  FAN4/TOP  8192 RPM 
 


To view the license information of the application:

Expand
Code Block
languagenone
show table system licenseInfo
                LICENSE                    USAGE               IN
FEATURE NAME    ID       EXPIRATION DATE   LIMIT   SOURCE      USE
--------------------------------------------------------------------
SRTP            3333     2020-12-31-05:00  1000    nodeLocked  0
SBC-LI          3333     2020-12-31-05:00  1       nodeLocked  0
DSP-EVS         3333     2020-12-31-05:00  1000    nodeLocked  0
ENCRYPT         3333     2020-12-31-05:00  1000    nodeLocked  0
SBC-RTU         3333     2020-12-31-05:00  150000  nodeLocked  0
DSP-EVRC        3333     2020-12-31-05:00  1000    nodeLocked  0
DSP-G722        3333     2020-12-31-05:00  1       nodeLocked  0
DSP-SILK        3333     2020-12-31-05:00  1000    nodeLocked  0
POL-BASE        0000                       1       BuiltIn     0
VDSP-RTU        3333     2020-12-31-05:00  1000    nodeLocked  0
DSP-AMRNB       3333     2020-12-31-05:00  1000    nodeLocked  0
DSP-AMRWB       3333     2020-12-31-05:00  1000    nodeLocked  0
SBC-SIP-I       3333     2020-12-31-05:00  1       nodeLocked  0
SBC-VIDEO       3333     2020-12-31-05:00  1000    nodeLocked  0
SBC-4X1GMP      3333     2020-12-31-05:00  1       nodeLocked  0
SBC-SIP323      3333     2020-12-31-05:00  1       nodeLocked  0
SBC-SIPREC      3333     2020-12-31-05:00  1000    nodeLocked  0
SBC-1X10GMP     3333     2020-12-31-05:00  1       nodeLocked  0
SBC-MRF-RTU     3333     2020-12-31-05:00  1000    nodeLocked  0
SBC-NICEREC     3333     2020-12-31-05:00  1000    nodeLocked  0
SBC-POL-RTU     3333     2020-12-31-05:00  1000    nodeLocked  0
SBC-CAPACITY    0000                       0       BuiltIn     0
SBC-POL-E911    3333     2020-12-31-05:00  1       nodeLocked  0
SBC-POL-ENUM    3333     2020-12-31-05:00  1       nodeLocked  0
SWE-INSTANCE    3333     2020-12-31-05:00  1       nodeLocked  0
SBC-P-DCS-LAES  3333     2020-12-31-05:00  1       nodeLocked  0
 


To view the MAC addresses status:

Expand
Code Block
languagenone
show table system macAddressStatus
                                                      USED
                                                      BY
SERVER NAME    MAC ADDRESS     STATUS  USED BY        PORT
---------------------------------------------------------------                        
bf067.eng.com  0:10:6b:3:c7:2  used    bf067.eng.com  pkt0_p
bf067.eng.com  0:10:6b:3:c7:3  used    bf067.eng.com  pkt1_p
bf067.eng.com  0:10:6b:3:c7:4  used    bf067.eng.com  pkt0_s
bf067.eng.com  0:10:6b:3:c7:5  used    bf067.eng.com  pkt1_s
bf068.eng.com  0:10:6b:3:c7:c  used    bf068.eng.com  pkt0_p
bf068.eng.com  0:10:6b:3:c7:d  used    bf068.eng.com  pkt0_s
bf068.eng.com  0:10:6b:3:c7:e  used    bf068.eng.com  pkt1_p
bf068.eng.com  0:10:6b:3:c7:f  used    bf068.eng.com  pkt1_s
 


To view CPU Utilization for the current interval period:

Expand
Code Block
languagenone
show table system cpuUtilCurrentStatistics 
CE NAME        CPU  AVERAGE  HIGH  LOW  
-------------------------------------------------
bf024.eng.com  1    0        0     0    
bf024.eng.com  2    0        1     0    
bf024.eng.com  3    0        0     0    
bf024.eng.com  4    0        0     0    
bf024.eng.com  5    0        0     0    
bf024.eng.com  6    0        0     0    
bf024.eng.com  7    0        0     0    
bf024.eng.com  8    0        0     0    
bf024.eng.com  9    0        0     0    
bf024.eng.com  10   0        0     0    
bf024.eng.com  11   10       10    0    
bf024.eng.com  12   0        0     0    
bf024.eng.com  13   0        0     0    
bf024.eng.com  14   0        0     0    
bf024.eng.com  15   0        0     0    
bf024.eng.com  16   0        0     0    
bf024.eng.com  17   0        0     0    
bf024.eng.com  18   0        0     0    
bf024.eng.com  19   0        0     0    
bf024.eng.com  20   0        0     0    
bf024.eng.com  21   0        0     0    
bf024.eng.com  22   0        1     0    
bf024.eng.com  23   0        0     0    
bf024.eng.com  24   0        0     0    
bf024.eng.com  25   0        0     0    
bf024.eng.com  26   0        0     0    
bf024.eng.com  27   0        0     0    
bf024.eng.com  28   0        0     0    
bf024.eng.com  29   0        0     0    
bf024.eng.com  30   0        0     0    
bf024.eng.com  31   0        1     0    
bf024.eng.com  32   0        1     0    
bf024.eng.com  33   0        0     0    
bf024.eng.com  34   0        0     0    
bf024.eng.com  35   0        0     0    
bf024.eng.com  36   0        0     0    
bf024.eng.com  37   0        0     0    
bf024.eng.com  38   1        1     0    
bf024.eng.com  39   0        0     0    
bf024.eng.com  40   0        0     0    
 


To view system congestion status details.

Expand
Code Block
languagenone
show table system systemCongestionStatus
                                                                               SYSTEM      SYSTEM      SYSTEM      SYSTEM      SYSTEM      SYSTEM
                                           SYSTEM                              CONGESTION  CONGESTION  CONGESTION  CONGESTION  CONGESTION  CONGESTION
       SYSTEM      SYSTEM      SYSTEM      CONGESTION  SYSTEM      SYSTEM      CALL        CALL        CALL        CALL EQ     REG         SUBS
       CONGESTION  CONGESTION  CONGESTION  CALL RATE   CONGESTION  CONGESTION  ARRIVAL     ACCEPT      ACCEPT      ARRIVAL     ARRIVAL     ARRIVAL
NAME   MCLEVEL     CPULEVEL    MEM LEVEL   LEVEL       IRTTLEVEL   MCDURATION  RATE        RATE        COUNT       RATE        RATE        RATE
-------------------------------------------------------------------------------------------------------------------------------------------------------
entry  0           0           0           0           0           23186       0           100         65535       0           0           0
 


To view system congestion current statistics.

Expand
Code Block
languagenone
show table system systemCongestionCurrentStatistics
                 LEVEL               LEVEL               LEVEL               AVG   PEAK            EMERGENCY  EMERGENCY                     AVG   PEAK  MAX               SIP      AVG   PEAK
       LEVEL     MC1TOTAL  LEVEL     MC2TOTAL  LEVEL     MC3TOTAL  OVERLOAD  CALL  CALL  CALL      CALL       CALL       SIP REG   SIP REG  REG   REG   ACTIVE  SIP SUBS  SUBS     SUBS  SUBS
NAME   MC1COUNT  TIME      MC2COUNT  TIME      MC3COUNT  TIME      REJECTS   RATE  RATE  ARRIVALS  ARRIVALS   REJECTS    ARRIVALS  REJECTS  RATE  RATE  CALLS   ARRIVALS  REJECTS  RATE  RATE
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
entry  0         0         0         0         0         0         0         0     0     0         0          0          0         0        0     0             435754    435502   697   719 
 


To view DoD mode status.

Expand
Code Block
languagenone
show table system dodModeStatus
INDX  STATUS
------------------------------------------------
0     DoD mode disabled. CLI/PM/sFTP enabled.
 


To view Micro Flow stats:

Expand
Code Block
languagenone
show table system ipPolicing uFlowStats
U      SOURCE                     SOURCE            LIF           POLICER  POLICER              AGG
FLOW   IP            DESTINATION  IP      IP        GRP  POLICER  BUCKET   CREDIT   AGG         POLICER   PACKET  PACKET   BYTE
INDEX  ADDRESS       IP ADDRESS   PORT    PROTOCOL  ID   MODE     SIZE     RATE     POLICER     PRIORITY  ACCEPT  DISCARD  ACCEPT
---------------------------------------------------------------------------------------------------------------------------------
1      10.10.10.10   10.11.12.13  45506   udp       2    PktRate  50       1023     "ZONE AGG"  1         1       0        527 
 


To view LSWU results:

Expand
Code Block
languagenone
show table system softwareUpgradeDetailedStatus RENAULTVOLVO detailedStatus
detailedStatus TargetRelease=V05.01.00-A985
               CurrentRelease=V05.01.00-A984
               NumberOfSteps=18
               CurrentStep=18
               UpgradeStartTime=2016-02-05T17:36:30+0530
               UpgradeCompleteTime=2016-02-05T18:29:51+0530
               UpgradeStatus=upgradeComplete
               primaryUpgradeStatus=none
               secondaryUpgradeStatus=none
               Reason=Successful_Completion
               ceName=VOLVO,StepNo=1,Step=PreUpgradeChecks,EstTime=20,StartTime=17:36:30,EndTime=17:36:30,Status=complete,Reason=Succesful_Completion
               ceName=VOLVO,StepNo=2,Step=PartitionSwitch,EstTime=120,StartTime=17:37:13,EndTime=17:43:20,Status=Complete,Reason=Successful_Completion
               ceName=VOLVO,StepNo=3,Step=Reboot,EstTime=240,StartTime=17:39:06,EndTime=17:43:20,Status=Complete,Reason=Successful_Completion
               ceName=VOLVO,StepNo=4,Step=OSUpgrade,EstTime=300,StartTime=17:43:35,EndTime=17:45:32,Status=Complete,Reason=Successful_Completion
               ceName=VOLVO,StepNo=5,Step=Reboot,EstTime=240,StartTime=17:45:34,EndTime=17:48:39,Status=Complete,Reason=Successful_Completion
               ceName=VOLVO,StepNo=6,Step=AppUpgrade,EstTime=180,StartTime=17:48:52,EndTime=17:51:51,Status=Complete,Reason=Successful_Completion
               ceName=VOLVO,StepNo=7,Step=DBRestore,EstTime=240,StartTime=17:52:21,EndTime=17:56:40,Status=Complete,Reason=Successful_Completion
               ceName=VOLVO,StepNo=8,Step=AppBringUp,EstTime=300,StartTime=17:57:05,EndTime=17:58:52,Status=Complete,Reason=Successful_Completion
               ceName=VOLVO,StepNo=9,Step=PostUpgrade,EstTime=30,StartTime=17:58:53,EndTime=18:01:05,Status=Complete,Reason=Successful_Completion
               ceName=RENAULT,StepNo=10,Step=PreUpgradeChecks,EstTime=20,StartTime=17:36:30,EndTime=17:36:30,Status=complete,Reason=Succesful_Completion
               ceName=RENAULT,StepNo=11,Step=PartitionSwitch,EstTime=120,StartTime=18:02:34,EndTime=18:08:42,Status=Complete,Reason=Successful_Completion
               ceName=RENAULT,StepNo=12,Step=Reboot,EstTime=240,StartTime=18:04:23,EndTime=18:08:42,Status=Complete,Reason=Successful_Completion
               ceName=RENAULT,StepNo=13,Step=OSUpgrade,EstTime=300,StartTime=18:08:57,EndTime=18:10:52,Status=Complete,Reason=Successful_Completion
               ceName=RENAULT,StepNo=14,Step=Reboot,EstTime=240,StartTime=18:10:54,EndTime=18:13:58,Status=Complete,Reason=Successful_Completion
               ceName=RENAULT,StepNo=15,Step=AppUpgrade,EstTime=180,StartTime=18:14:12,EndTime=18:17:11,Status=Complete,Reason=Successful_Completion
               ceName=RENAULT,StepNo=16,Step=DBRestore,EstTime=240,StartTime=18:17:42,EndTime=18:22:04,Status=Complete,Reason=Successful_Completion
               ceName=RENAULT,StepNo=17,Step=AppBringUp,EstTime=300,StartTime=18:25:27,EndTime=18:28:15,Status=Complete,Reason=Successful_Completion
               ceName=RENAULT,StepNo=18,Step=PostUpgrade,EstTime=30,StartTime=18:29:15,EndTime=18:29:50,Status=Complete,Reason=Successful_Completion
               ;


To display the current HA configuration settings:

Expand
Code Block
show table system haConfig
                LEADER    BOND
SERVER NAME     ELECTION  MONITORING
--------------------------------------------------
SBC01           standard  direct-connect


To display results of running verifyDatabaseIntegrity command:

Expand
Code Block
request system admin HA5210 verifyDatabaseIntegrity all
 
show table system databaseIntegrity
                             SYNC
SYNC MODULE NAME             STATUS  TIME STAMP
---------------------------------------------------------------
activeAndStandbyPolicy       inSync  Thu Jun  2 11:06:40 2016
activeConfigAndActivePolicy  inSync  Thu Jun  2 11:06:40 2016

 


To display sync status of active and standby nodes created through a N:1 redundancy group:

Expand
Code Block
show table system syncStatus
 
SYNC MODULE             STATUS
---------------------------------------
Metavar Data            syncCompleted
Call/Registration Data  syncCompleted

show table system syncStatus
 
SYNC MODULE             STATUS
--------------------------------------------------
Metavar Data            unprotectedRunningStandby
Call/Registration Data  unprotectedRunningStandby
 


To view sync status details of the standby node for active nodes created through a N:1 redundancy group configuration.

Expand
Code Block
languagenone
show table system standbySyncStatus
ACTIVE SERVER
NAME				SYNC MODULE             STATUS
-----------------------------------------------------------
vMsbc1-10.10.20.17	Metavar Data            syncCompleted
vMsbc1-10.10.20.17	Call/Registration Data  syncCompleted
vMsbc2-10.10.20.18	Metavar Data            syncCompleted
vMsbc2-10.10.20.18	Call/Registration Data  syncCompleted
vMsbc3-10.10.20.19	Metavar Data            syncCompleted
vMsbc3-10.10.20.19	Call/Registration Data  syncCompleted
vMsbc4-10.10.20.26	Metavar Data            syncCompleted
vMsbc4-10.10.20.26	Call/Registration Data  syncCompleted
 


To view the personality role of the

Spacevars
0product2
 instance.

Expand
Code Block
languagenone
show table system sbcPersonalityStatus role
role ssbc;
 


To view license bundle details for node-locked licenses:

Expand
Code Block
languagenone
show table system licenseNodeLockedBundleInfo
                                                           ACTIVE
BUNDLE                  LICENSE                    USAGE   LICENSE
NAME    FEATURE NAME    ID       EXPIRATION DATE   LIMIT   MODE
-----------------------------------------------------------------------
b1      SRTP            3333     2020-12-31-05:00  1000    nodeLocked
b1      SBC-LI          3333     2020-12-31-05:00  1       nodeLocked
b1      DSP-EVS         3333     2020-12-31-05:00  1000    nodeLocked
b1      ENCRYPT         3333     2020-12-31-05:00  1000    nodeLocked
b1      SBC-RTU         3333     2020-12-31-05:00  150000  nodeLocked
b1      DSP-EVRC        3333     2020-12-31-05:00  1000    nodeLocked
b1      DSP-G722        3333     2020-12-31-05:00  1       nodeLocked
b1      DSP-SILK        3333     2020-12-31-05:00  1000    nodeLocked
b1      POL-BASE        3333     2020-12-31-05:00  1       nodeLocked
b1      VDSP-RTU        3333     2020-12-31-05:00  1000    nodeLocked
b1      DSP-AMRNB       3333     2020-12-31-05:00  1000    nodeLocked
b1      DSP-AMRWB       3333     2020-12-31-05:00  1000    nodeLocked
b1      SBC-SIP-I       3333     2020-12-31-05:00  1       nodeLocked
b1      SBC-VIDEO       3333     2020-12-31-05:00  1000    nodeLocked
b1      SBC-4X1GMP      3333     2020-12-31-05:00  1       nodeLocked
b1      SBC-SIP323      3333     2020-12-31-05:00  1       nodeLocked
b1      SBC-SIPREC      3333     2020-12-31-05:00  1000    nodeLocked
b1      SBC-1X10GMP     3333     2020-12-31-05:00  1       nodeLocked
b1      SBC-MRF-RTU     3333     2020-12-31-05:00  1000    nodeLocked
b1      SBC-NICEREC     3333     2020-12-31-05:00  1000    nodeLocked
b1      SBC-POL-RTU     3333     2020-12-31-05:00  1000    nodeLocked
b1      SBC-POL-E911    3333     2020-12-31-05:00  1       nodeLocked
b1      SBC-POL-ENUM    3333     2020-12-31-05:00  1       nodeLocked
b1      SWE-INSTANCE    3333     2020-12-31-05:00  1       nodeLocked
b1      SBC-P-DCS-LAES  3333     2020-12-31-05:00  1       nodeLocked

 


To view Server Admin status details on a virtual SBC:

Expand
Code Block
languagenone
> show table system serverAdmin
                                       DEVICE                                      HW
           ACTUAL CE  COREDUMP         SMART    MODULAR                PKT PORT    SUB
 NAME      NAME       PROFILE   ROLE   ATTRIB   TYPE     HW TYPE       SPEED       TYPE
----------------------------------------------------------------------------------------------
WFDSBC01a  WFDSBC01a  default   primary  0     false    ConnexIP5200  speed1Gbps  5200
 
 
> show table system serverAdmin
  
none

To switch over the management applications and restart “all” the applications:

Noprint

Toggle Cloak
Click to expand...

Cloaknone

To view

Spacevars
0product
daughter board status (SBC 7000 results shown):

Noprint

Toggle Cloak
Click to expand...

Cloaknone

 Two maintenance fields apply in this view:

  • IMAGE LOAD FAILURE COUNT – Number of module boot failures since the last successful module boot, for use during diagnostic testing of a potentially failed module.
  • FPGA VERSION – A card’s programmed firmware version (using FPGA build date).
Info
titleNote

The maintenance fields IMAGE LOAD FAILURE COUNT and FPGA VERSION do not apply to SPS100 cards.

To view the synchronization status of the system as a table:

Noprint

Toggle Cloak
Click to expand...

Cloaknone

To view the front panel LED status of the system:

Noprint

Toggle Cloak
Click to expand...

Cloaknone

To view fan status (example is for

Spacevars
0series2
):

Noprint

Toggle Cloak
Click to expand...

Cloaknone

To view the license information of the application:

Noprint

Toggle Cloak
Click to expand...

Cloaknone

To view the MAC addresses status:

Noprint

Toggle Cloak
Click to expand...

Cloaknone

To view CPU Utilization for the current interval period:

Noprint

Toggle Cloak
Click to expand...

Cloaknone

To view system congestion status details.

Noprint

Toggle Cloak
Click to expand...

Cloaknone

To view system congestion current statistics.

Noprint

Toggle Cloak
Click to expand...

Cloaknone

To view DoD mode status.

Noprint

Toggle Cloak
Click to expand...

Cloaknone

To view Micro Flow stats:

Noprint

Toggle Cloak
Click to expand...

Cloaknone

To view LSWU results:

Noprint

Toggle Cloak
Click to expand...

Cloaknone

To display the current HA configuration settings:

Noprint

Toggle Cloak
Click to expand...

Cloak

To display results of running verifyDatabaseIntegrity command:

Noprint

Toggle Cloak
Click to expand...

Cloak

To display sync status of active and standby nodes created through a N:1 redundancy group:

Noprint

Toggle Cloak
Click to expand...

Cloak

To view sync status details of the standby node for active nodes created through a N:1 redundancy group configuration.

Noprint

Toggle Cloak
Click to expand...

Cloaknone

To view the personality role of the

Spacevars
0product2
 instance.

Noprint

Toggle Cloak
Click to expand...

Cloaknone

To view license bundle details for node-locked licenses:

Noprint

Toggle Cloak
Click to expand...

Cloaknone

To view Server Admin status details on a virtual SBC:

Noprint

Toggle Cloak
Click to expand...

Cloaknone

To view the Network Segment Table:

Code Block
titleExample
collapsetrue
> show table system networkSegmentTable NETWORK
                                     DEVICE   
NETWORK
              
SEGMENT
  
PFE
  
VLAN
                 HW
           ACTUAL 
INTERFACE
CE  
PREFIX
COREDUMP  
PREFIX
       SMART    MODULAR    
RANGE
  
RANGE NAME
          
TYPE
PKT PORT    
ID
SUB
 NAME  
ID
    
PRIMARY
NAME       PROFILE  
SECONDARY
 ROLE 
NAME
  ATTRIB   TYPE  
V4
   HW TYPE  
V6
     SPEED 
STATE
  
NAME
  
START
  
END -------------
TYPE
----------------------------------------------------------------------------------------------
-------- test123

VSBC       
SG - -
VSBC      
- - mgmt0 12 - - mgt0_
default  
OAM
 primary   0  
-
   false 
-
   ConnexIP5000  
sbx-testr-mgt0 - mgmt0 24 - -
speed1Gbps  virtual