Versions Compared

Old Version 4

changes.mady.by.user Youstra, Ellen

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Add_workflow_for_techpubs
AUTH1
JIRAIDAUTHSBX-96026
REV5
REV6
REV3
REV1

Use the registerContactProfileName parameter to assign a Register Contact Profile profile to a zone. This type of profile could be needed in cases when users  This could be needed to ensure that each registration is recognized as distinct when a user residing behind a PBX send sends registration requests from multiple devices (such as a phone and laptop). For more information on Register Contact Profilesprofiles, refer to Creating Multiple User Registrations Based on Contact Headers in REGISTER Messages and Register Contact Profile - CLI.

Command Syntax

The following is the command syntax for assigning a Register Contact Profile profile to a zone. 

Code Block
% set addressContext <addressContext name> zone <zone name> registerContactProfileName <registerContactProfile name>

Command Parameter

The following table describes the parameter used to assign a Register Contact Profile profile to a zone.

Caption
0Table
1Zone Parameter for Assigning a Register Contact Profile


ParameterDescription

registerContactProfileName
<registerContactProfile name>

Specifies the name of a Register Contact

Profile

profile to assign to a zone. The SBC uses the Contact header elements specified in the profile as additional keys when it creates or retrieves registration control blocks (RCBs) for users registering through this zone.