Page History

Perform the following steps to save the existing 

 configuration.

 The backup file created by this procedure is used to restore the system configuration if reinstallation of the software is needed for any reason.

To reload

the 

 for guidance.

1. Log on

1. to 

   Spacevars
   0 product

    CLI. Execute the following command to save

1. the 

   Spacevars
   0 product

    configuration.
   
   Command Syntax

   Code Block
   % request system admin <SYSTEM NAME> saveConfig

   
   Command Example

   Code Block
   language none title Example:

1. admin@SBCSWE1A> request system admin

1. SBCSWE1 saveConfig

1. This command will save the current configuration. Do you want to continue

1. [no,yes] yes

1. result success reason Configuration Saved as

1. : config_SBCSWE1_20181004_191349.tar.gz

1. Info
   title Note
   This command saves the current configuration to a time-stamped zipped tar file located in /var/log/sonus/sbx/config directory of SBC active server.

2. Use SFTP

1. to copy the configuration file from the active server to the remote server. Following is an example to transfer the saved configuration file to a remote linux server.

   Code Block
   language none title Example:
   # sftp -oPort=2024

1. admin@SBC01a:/var/log/sonus/sbx/config/config_SBC01_20110824_021127.tar.gz /home/bob/SBC01/config

1. admin@SBC01a's password:

1. <admin> Connected to SBC01a. Fetching /var/log/sonus/sbx/config/config_SBC01_20110824_021127.tar.gz to /home/bob/SBC01/config