| Parameter Description | Length/Range | Parameter Description |
|---|
| Name | 1-23 characters | The name of the NNIProfile used to control interworking of charging parameters for SIP to/from SIP-I/T, GW-GW and ISUP calls. The NNI Profile is attached to a SIP trunk group. |
| Charge Area Information | (ASCII 0-9) | A 5-digit value representing the charge area Information that applies to calls establishing the INVITE. |
| Additional Party Category First | N/A | Use this parameter to select one of the following values to specify the first Additional Party Category type. The configured value will be included inside the policy request message sent to the PSX and sent in the ISUP IAM message body of SIP-I/T or over GW-GW message. - Fixed_1-1
- Fixed_1-2
- Mobile_1-1
- Mobile_1-2
- Mobile_1-3
- Mobile_1-4
- Mobile_1-5
- Mobile_2-1
- Mobile_2-2
- Mobile_2-3
- Mobile_2-4
- Mobile_2-5
- Mobile_2-6
- Mobile_2-7
- Mobile_2-8
- Mobile_2-9
|
| Additional Party Category Second | N/A | Use this parameter to select one of the above values to specify the second Additional Party Category type. The configured value will be included inside the policy request message sent to the PSX and sent in the ISUP IAM message body of SIP-I/T or over GW-GW message. |
| Calling Party Category Interworking | N/A | The flag Calling Party Category Interworking has two possible values: - Disabled (default)
- Enabled
To start Calling Party Category Interworking, set this flag to enabled. When set to enabled, the populates the parameter Calling Party Category (CPC) with the value 11, on receiving the Resource Priority Header (RPH) in the initial INVITE. Here, the value 11 denotes "Calling Subscriber with priority". When RPH is absent in the initial INVITE, SBC populates the parameter CPC from the PAI Header. |
| History Info Interworking | N/A | The flag History Info Interworking has two possible values: - Disabled (default)
- Enabled
To start History Info Interworking, set this flag to enabled. When set to enabled, for the SIP-SIP-I call leg, the maps History Info Header to ISUP Parameters (Original Called Number, Redirection Number, and Redirection Information). For the SIP-I-SIP call leg, the SBC maps the ISUP parameters in the MIME body to the corresponding History Info Header.
To summarize, when History Info Interworking is enabled, the SBC supports the following mappings:
- History-Info to ISUP parameters (Redirecting Number, Original Called Number, and Redirection Information) for redirection, and the other way for the SIP-I-SIP call leg.
- History-Info to ISUP parameters (Called IN Number and Original Called IN Number) for number translation, and the other way for the SIP-I-SIP call leg.
|
| Enable PVCTTCParams | N/A | When disabled, the SBC deactivates the NNI PCV to trigger. The options are: - Disabled (default)
- Enabled
|
| Set Hi Presentation Restricted | N/A | The flag Set Hi Presentation Restricted has two possible values: - Disabled (default) – When disabled, the SBC sends send the Presentation as per privacy information it received.
- Enabled
–
If privacy=history, Presentation should be Restricted If privacy=none or not present, Presentation should be allowed |
| Add User Equal Phonefor Div Hi Interworking | N/A | To start Add User Equal Phonefor Div Hi Interworking, set this flag to Enabled. - Disabled (default) – When disabled, the SBC will not add user=phone and mp parameter to history-info in Diversion-History-Info interworking.
- Enabled – When enabled, the SBC sends user=phone and the mp parameter to history-info header, but only for Diversion-History-Info interworking.
|
| Contractor Num Interworking | N/A | Enable this parameter to interwork the parameter Contractor Number to/from the ttc-charging-params information in the SIP header P-Charging-Vector. - Disabled (default)
- Enabled
|
| Carrier Information Transfer - Carrier Category And Info | N/A | Use this object to define the carrier poi-category and carrier ID code. - Carrier Category – The carrier category type.
- Olec – The SBC inserts the "olec" in the SIP requests in SIP to SIP-I interworking scenarios.
- Tlec – The SBC inserts the "tlec" (terminating carrier info) in the SIP responses in SIP to SIP-I interworking scenarios.
- Carrier Info - Carrier ID Code – A 4-digit carrier identification code associated with the charge area. Only ASCII characters from 0 to 9 are valid.
NOTE: The following Carrier Category values are not supported in this release: |
| Forward Call Indicator | N/A | Use this object to configure forward call indicator settings. - National Call Indicator – Choose a National Call Indicator type:
- Int – International call
- Nat – National call
- Originating Isdn Indicator – Choose an Originating ISDN Access Indicator type:
|