Page History

Add_workflow_for_techpubs

AUTH1	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ca7f046c, userName='null'}
JIRAIDAUTH	SBX-89464
REV5	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb8305e9, userName='null'}
REV6	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb8305e9, userName='null'}
REV3	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cbee06ac, userName='null'}
REV1	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb1e054d, userName='null'}

Panel

In this section:

Table of Contents

maxLevel	4
minLevel	2

This section lists SIP Common IP Attributes Relay Flags parameter details.

Info

title	Note

The methods relay flags control the relay of in-dialog non-INVITE and non-REGISTER methods within dialogs established by the SIP INVITE method.

Command Syntax

Code Block

% set profiles signaling ipSignalingProfile <profile_name> commonIpAttributes relayFlags
	conferenceEventPackage <disable | enable>
	dialogEventPackage <disable | enable> 
	dtmfBody <disable | enable> 
	force503to500Relay <disable | enable> 
	info <disable | enable> message <disable | enable>
	messasge <disable | enable>
	notify <disable | enable> options <disable | enable> 
	options <disable | enable>
	publish <disable | enable> refer <disable | enable> 
	refer <disable | enable>
	referToHeaderRelay <disable | enable>
	regEventPackage <disable | enable> 
	sonusMediaBody <disable | enable> 
	statusCode3xx <disable | enable> 
	statusCode4xx6xx <disable | enable> 
	thirdPartyBodies <disable | enable>
	updateWithoutSdp <disable | enable>

Command Parameters

Caption

0	Table
1	Relay Flags
3	Relay Flags

Parameter	Description
`conferenceEventPackage`	Enable to relay conference event xml message body (application/conference-info+xml body) to the peer. `disable` (default) `enable`

Note

icon	false
title	Note

NOTE: To pass this body transparently, enable the conference-info xml body relay flag.

dialogEventPackage

Enable

Enable this flag to

allow

allow the

Spacevars

0	product

to send the Dialog Event Package to the peer.

disable (default)
enable

Note

icon	false
title	Note

NOTE: This flag only applies to unregistered users.
`dtmfBody`	Enable flag to

allow

allow the

Spacevars

0	product

to relay DTMF body to the peer for responses to INVITE and BYE messages, relayed INFO, REFER, NOTIFY, OPTIONS, SUBSCRIBE request messages, and relayed 3xx, 4xx, 5xx, and 6xx in response to INVITE messages. Provision this flag on the ingress leg with respect to the message direction.

disable (default)
enable

force503to500Relay

Enable flag to force 503 Service Unavailable message to map to 500 Internal Server Error message.

disable (default)
enable

info

Enable to relay SIP INFO method to the peer. If disabled, the

Spacevars

0	product

processes SIP INFO methods locally.

disable (default)
enable

message

Enable to relay SIP MESSAGE method to the peer. If disabled, the

Spacevars

0	product

processes SIP MESSAGE methods locally.

disable (default)
enable

notify

Enable this flag to relay SIP NOTIFY method to the peer. If disabled, the

Spacevars

0	product

processes SIP NOTIFY methods locally.

disable (default)
enable

options

Enable this flag to relay SIP OPTIONS method to the peer. If disabled, the

Spacevars

0	product

processes SIP OPTIONS methods locally.

disable (default)
enable

NOTE: The SBC will relay the OPTIONS method if Route header is present and Max-forwards value is not "0" irrespective of whether this flag is enabled or disabled. If no suitable route is found, the SBC returns "404 Not Found" error response.

publish

Controls the transfer of instant messages (IMs). Enable flag to

allow

allow the

Spacevars

0	product

to relay SIP PUBLISH methods to the peer. When disabled, the

Spacevars

0	product

processes SIP PUBLISH methods locally. Provision this flag on the ingress leg with respect to the message direction.

disable (default)
enable

refer

When enabled, the

Spacevars

0	product

relays SIP REFER methods to the peer. When disabled, the

Spacevars

0	product

processes SIP REFER methods locally.

disable (default)
enable

Note: Starting with SBC SWe version 8.1, the D-SBC supports REFER (without replaces) in relay and local processing mode for audio pass-through calls.

referToHeaderRelay

Use this flag to relay the replaces in refer-To header of relayed REFER request. The options are:

rejectReferIfnoMatchForcallId (default) – If no match is found for the call-Id received, the REFER is rejected.
relayReferIfNoMatchForCallId – The SBC tries to match the received call-Id. If a match is found, the SBC translates the replaces header and relays the REFER message. If no match is found for call-id, the SBC relays the replaces without any changes.
relayReferWithoutMatching – The SBC always relays the replaces in refer-to without searching for match of call-id.

regEventPackage

Enable this flag to relay Registration Event Package information to the peer. If disabled, the

Spacevars

0	product

rejects the Registration Event Package.

disable (default)
enable

sonusMediaBody Enable this flag to relay

Sonus

Ribbon media body to the peer for responses to INVITE and BYE messages, relayed INFO, REFER, NOTIFY, OPTIONS, SUBSCRIBE request messages and relayed 3xx, 4xx, 5xx, and 6xx in response to INVITE messages. Provision this flag on the ingress leg with respect to the message direction. `disable` (default) `enable`
`statusCode3xx`	Enable this flag to relay 3xx status code to the peer in response to INVITE requests. Provision this flag on the trunk group that receives the 3xx response (the egress leg of the call). `disable` (default) `enable`
`statusCode4xx6xx`	Enable this flag to relay the error status codes (4xx, 5xx, or 6xx) in response to initial INVITE requests (does not apply to re-INVITEs). Provision this flag on the trunk group that receives the error response (the egress leg of the call). `disable` (default) `enable`

Note

icon	false
title	Note

NOTE: You must enable this flag when using `authcodeHeaders` transparency flag.
`thirdPartyBodies`	Enable this flag to relay third party bodies to the peer in response to INVITE and BYE messages, relayed INFO, REFER, MESSAGE, NOTIFY, OPTIONS, SUBSCRIBE request methods and relayed 3xx, 4xx, 5xx, and 6xx responses to INVITE methods. Provision this flag on the ingress leg with respect to the message direction. `disable` (default) `enable`
`updateWithoutSdp`	Enable this flag to relay UPDATE message without SDP. `disable` (default) `enable`

SIP Headers not Controlled Using Relay Flags

Refer to SBC SIP Transparency Implementation Guide for a list of SIP headers not controllable by relay (or transparency) flags in relay scenarios.

Include Page

	Transparency_Profile_Note
	Transparency_Profile_Note

Pagebreak

Space shortcuts

Page tree

Versions Compared

Old Version 4

New Version Current

Key

Command Syntax

Command Parameters

SIP Headers not Controlled Using Relay Flags