Page History

HTTPS Support

The EMA GUI is available via TLS-secured (https) access either directly through port 443 or indirectly through port 80 to 443. ACL rules are not applicable to prevent unsecured (http) access.

A sample X.509 certificate, which is a copy of the BMC and the EMA Platform Mode certificate, is shipped along with the 

Spacevars
0 product

shipment. The size of this certificate is 2,000 bytes.

Info
title Note
The BMC is not applicable to Spacevars 0 product2 .

The EMA uses the common Local Cert store of the 

Spacevars
0 series4

(used also for SIP/TLS) rather than having its own separate certificate store. The operator may replace that sample certificate at any time. The replacement mechanism is implemented with post installation/upgrade scripts.

Certificates with RSA keys up to 4,096 bits are supported.

Info

title	Note

Sonus recommends using only 2,048 bit certificates with release 3.1. 

Spacevars
0 company

 discourages the use of 4,096 bit certificates in 3.1 due to anticipated upgrade issues with the current software

.

Enter the following URL in the browser to access the

Spacevars
0 product

EMA:

https://<hostname>

where, the where <host name> is one of the management IP addresses of the

Spacevars
0 product

, or the equivalent DNS name. For example, https://10.54.41.8.

The EMA uses a self-signed certificate which may produce a warning message by from Internet Explorer and Firefox. These messages may be ignored.

Info
title Note
The Spacevars 0 series4 is delivered with sample self-signed X.509 certificates. Please be Be aware that even though these sample certificates will allow you to use HTTPS to access the Spacevars 0 product from EMA, BMC and EMA Platform Mode interfaces, using this protocol with the sample certificates is not a truly secure access method. If your organization requires a more secure access, refer to Generating PKI Certificates.

Info
title Note
The Spacevars 0 series4 supports SHA-256 for certificate verification.

Logging In

Supported Browsers and Client Computers

Refer to See 

Link_in_new_tab
Text Supported Browsers and Client Computer Requirements URL Introduction to EMA

for a listing list of supported browsers and client platforms when for accessing EMA.

Procedure

Following are the steps to To log into the Embedded Management Application (EMA):

1. Launch your web browser.

2. Enter the

   Spacevars
   0 product

   EMA URL <ip address/device
   name>

   name> 

   Info
   title Note
   Sometimes, when When using Internet Explorer/Mozilla Firefox browser, a website security issue may prevent you from going directly to the the SBC application login screen, as shown in example below.

   Click Advanced

   .

   Caption
   0 Figure 1 Certificate Security Error

3. Click

   Add Exception

   Advanced.

   Caption
   0 Figure 1 Firefox Message - Self-Certified Website
   Image Modified

   Uncheck the Permanently store this exception check-box and click
4. Confirm Security

   Click Add Exception. 

   Caption
   0 Figure 1 Firefox Message - Add Security Exception
   Image Modified

    

5. Uncheck the Permanently store this exception check-box and click Confirm Security Exception.  The Login window appears as shown below

   :

   . 

   Caption
   0 Figure 1 Login

6. Enter your Username

   and

    and Password. Your

   Username

   username and

   the Password

   password will be supplied along with

   the

   the 

   Spacevars
   0 product

   installation

    installation package. Once you have successfully logged

   in to

   into the SBC,

   you

   your temporary password expires and you are prompted to change your password.

Info
title Note
This change password screen appears only for the first

log on

login of the new user.

Caption
0 Figure 1 Change Password
Image Modified

Ensure your new password meets the following criteria

are met to successfully change the password

:

• • Minimum length of characters is 8.
  • Minimum number of upper case characters is 1.
  • Minimum number of lower case characters is 1.
  • Minimum number of numeric digits is 1.
  • Minimum number of special characters is 1.
  • Maximum number of consecutive repeating characters is 3.
  • Minimum number of differences compared to the old password is 4.
  • Do not repeat any of the last 4 passwords.

7. Once

the

your password is successfully changed, enter

the Username

your username and

the new Password and click Log In.

new password on the Login screen and click Log In.

Incorrect Username-Password Combination

If you enter incorrect Username-Password combination, the following error message is displayed:

Caption
0 Figure 1 EMA Incorrect Login Credentials
Image Removed

 

Information in the Login Window

The Login window displays the following:

• Username
• Password

The following table describes the login window components.

Caption
0 Table 1 Login Window Components
Attributes Description Username Name of the user logging into the application. Password Password associated with the user who is logging in.

Info
title Note
You can also change the password in EMA without logging in to the application. The option to change password is available on the SBC Application login screen. The Username and Password is Your username and password are same as that for the CLI.

 

Messages After Successful Login

After you log on to the EMA, you may get one of the following messages:

If you enter the correct login credentials:

Caption
0 Figure 1 Successful EMA Login
Image Removed

Last Login Information 

 When

If you make mistake, or someone had tried to unsuccessfully log on using your username but gave the wrong password:

AnchorLogin Message - Previous Unsuccessful AttemptsLogin Message - Previous Unsuccessful Attempts

Caption
0 Figure 1 EMA Login Message - Previous Unsuccessful Message
Image Removed

 

Last Login Display Date

The last login date of the user is displayed during the login time. When a user logs into either the CLI /or EMA, his/her information on the last successful and failed login date and the IP address attempts is displayed. The user evaluates this information to check illegal activities in the account.The information which are displayed at logininformation shown includes:

1. Last successful login date and time.
2. Last successful login IP address.
3. Last unsuccessful login date and time.
4. Last unsuccessful login IP address.

5. Number of failed attempts after successful login.

    

Info
title Note

The

Items 3, 4 and 5

will be displayed

display only when the last successful login date is older than the last unsuccessful login date. See the figure Login Message - Previous Unsuccessful Attempts.

Info
title Note
The Last Login Information is also displayed displays for a new user for the first login , as the . The new user is first authenticated and then allowed to change the system-generated password.

Configuring a Banner in the Login Screen

1. On the main screen, navigate to Admin > Application Management. Click Banner chiclet on the left hand side of the page to display the Configure Login Banner window.
2. Enable Show Login Banner option. You can request the user to acknowledge the Banner by enabling the Require User to Acknowledge Banner before Logging in option and also, you can request the user to acknowledge every time they login or only during the first login.
3. Add your banner text in the text box next to Banner Text option to display your Banner content.
4. Click Save to save your edits.

 

Logging Out of EMA

To log out of the EMA:

Caption0Figure1

Hover the mouse pointer over <your_username> on the menu bar. and click

Log Out.

Log Out

Image Removed

Confirm logging out by clicking Yes on the dialog-box

.

Caption
0 Figure 1 Log Out

Confirmation

Image Modified

Security Enhancement

- SBC Allows

to Allow Only One Concurrent EMA Session

Info
This security enhancement is available for beginning with SBC Core version 06.02.00R000 onward.

This enhancement enables the EMA application (including EMA in platform mode) to disable concurrent user login sessions. Once a new session is established, any existing session is terminated immediately. When an EMA user attempts to log onin, the system validates checks for any open sessions with the same username. If any existing user session is identified, the that user is immediately logged out from the application and allows the new user to log on in to the system.

Info
title Note
This feature is applicable to all the EMA users (local users, radius users, PKI Certificate certificate-based users, and CAC users).

Caption

0	Figure
1	EMA User Logged Out Automatically

Image Removed

Pagebreak