...
Excerpt |
---|
Defines a FAX Codec Profile used by the Media List Profile Table. |
Parameter Name | Required | Service Affecting | Data Type | Default Value | Possible Values | Description |
---|---|---|---|---|---|---|
Description | No | No | string | none | 64 - Max Length | Identifies this profile so it can be easily recognized when selecting a codec. |
...
...
...
FaxRateInBitsPerSecond | No | No | int | 14400 | Possible values:
| Specifies the maximum fax connection rate. Acceptable rate values are:
|
---|---|---|---|---|---|---|
SignalingPacketRedundancy | No | No | int | 3 | Possible values:
| Specifies the number of redundant packets to be sent for each T.30 (signaling) message. |
PayloadPacketRedundancy | No | No | int | 0 | Possible values:
| Specifies the number of redundant packets to be sent for each packet containing page data. |
ErrorCorrectionMode | No | No | Enum | 0 | Possible values:
| Specifies the error correction mode (ECM) for fax calls. |
TrainingConfirmation | No | No | Enum | 1 | Possible values:
| Specifies the Training Confirmation (TCF) procedure for fax calls.
|
...
| ||||||
FaxRelayFallBack | No | No | Enum | 0 | Possible values:
| Specifies if the T.38 should fall back to Fax Passthrough if not supported by peer. |
---|---|---|---|---|---|---|
SG3ToG3Fallback | Yes | No | Enum | 0 | Possible values:
| Specifies if the system should force Super G3 to Super G3 fax calls to lower rates so T.38 protocol can be used. This is applicable only for the SBC 1000/2000 platforms |