Parameter | Description |
---|
Name | The SWe Active Profile Name. The SWe traffic profile name. The list of profiles include the following standard profiles: - default - By default, non-cloud instances comes up with are assigned the default profile. This profile retains the SBC SWe behavior of earlier releases (5.0.x and 5.1.x), where signaling and media vCPUs overlapped.
- standard_signaling_profile - This profile utilizes the vCPUs for signaling (direct media) calls and it is auto-configured on the Cloud . It is assigned by default on cloud-based S-SBC instanceinstances.
- standard_passthrough_profile - This profile utilizes the vCPUs for passthrough pass-through calls.
- standard_transcoding_profile - This profile utilizes the vCPUs for transcoding transcoded calls.
- standard_callmix_profile - This profile supports call mix which contain a combination of 90% pass-through and 10% transcoding calls.
- standard_msbc_profile - The purpose of this profile is to utilize the vCPUs primarily for passthrough pass-through calls. This profile gets auto-configured on Cloud cloud-based M-SBC instanceinstances.
- standard_highcps_callmix_profile - This profile is similar to standard passthrough pass-through profile with higher CPS.
|
Call Hold Time | Average Call Hold Time of the call load. |
Is Access Scenario | If true, deployment is in access scenarioWhether the deployment supports an access scenario. Options are True or False (default). |
Bhca Per Subscriber | BHCA per subscriber. |
Registration Interval | Registration Interval in seconds. |
NAT Enabled | The status of NAT configuration. |
This option does not appear until Is Access is set to True. |
Interval Refresh Timer | Registration interval, in seconds. This option does not appear until Is Access is set to True. |
External Refresh Timer | Refresh Interval, in seconds. This option does not appear until Is Access is set to True | Registration Refresh Interval | Refresh Interval in seconds. |
Direct Media Percent | The percentage of call load that is Direct Mediacall load percentage for direct media. The does not convert Direct Media to pass-through calls (Range = 0-100, default = 0). NOTE: Ensure that the combined total percentage of Direct Media Percent and Transcode Percent does not exceed 100%. |
Transcode Percent | The percentage Percentage of the call load that is transcoded call. |
Passthrough Codec Profile | The name of the pass-through codec mix profile to use. |
Transcoding Codec Profile | The name of the transcoding codec mix profile to use. This option does not appear until the Transcode Percent is greater than 0/ |
Crypto Percent | The crypto percentage refers to Configured percentage value for the number of legs that are encrypted. |
Tone Percent | The number Percentage of legs that get tones treatment. | Max VMbandwidth | The maximum VM bandwidth in Gbps. |
Processor Capability Index OverrideIf true, index | overriding is disabled and the the value for the field Processor Whether or not a Capability Index Override Value can should be enteredconfigured. |
Processor Capability Index Override ValueThe value of Processor | If the value of the Processor Capability Index Override Value field is True, then this field can be configured. |