Page History

...

This article describes the steps necessary to configure a 

Spacevars
0 product

to employ the SIP Timer Functionality in the depicted topology:

Configuration

...

1. In the WebUI, click the Settings tab.
2. In the left navigation pane, go to SIP > SIP Profiles
3. Select the relevant SIP Profile.

4. Configure the Session Timer as shown in the figure below.
   Important: The Offered Session Timer value must be equal to or greater than the Minimum Acceptable Value.

   Panel
   borderStyle none
   Caption 0 Figure 1 Configure Session Timer Image RemovedImage Added

Signaling Group

1. In the WebUI, click the Settings tab.
2. In the left navigation pane, go to Signaling Groups > (relevant SIP Signaling Group).
3. Select the SIP Profile configured above from the SIP Profile selection list.

4. Click Apply.

   Panel
   borderStyle none
   Caption 0 Figure 1 Apply Configured SIP Profile Image Removed Image Added

Call Flow

After having applied the configuration changes, in the call flow, the 

Spacevars
0 product

supports the UPDATE and INVITE  methods for changing the media capabilities. Session Timer (RFC 4028) uses the INVITE or UPDATE as a mechanism for a periodic refresh of SIP sessions.

...

Panel
borderStyle none
Caption 0 Figure 1 SBC 1000/2000 to Lync/SBA Call Image Modified

Pagebreak