Page History

Calls to Lync analog devices

This module employs the Ring No Answer (RNA) action to send unanswered calls to a Lync analog device to Exchange. In effect, this module supplies the ability to leave voicemail for a Lync analog device.

...

1. Create a Transformation Table for Routing to Lync. This will be used by the Call Router. For details, refer to Creating and Modifying Entries to Transformation Tables.

2. Create a Transformation Table Entry to route the call to Lync. If all the numbers have been processed and normalized correctly, you should be able to use the Passthrough Untouched transformation that is created when the Lync Task (wizard) is run.

   Pagebreak

   Caption
   0 Table 1 Create Transformation Table
   InputField Type Input Field Value Output Field Type Output Field Value Match Type Called Address/Number (.*) Called Address/Number \1 Mandatory

...

1. Create a Lync Call Routing Table. For details, refer to Creating and Modifying Entries to Call Routing Tables.
2. Create a Lync Call Routing entry to point the call to the Lync server. Select the newly created Transformation Table and signaling group. For details, refer to Creating and Modifying Entries to Call Routing Tables.
    

Create the Ring No Answer (RNA) Action Set

...

1. Create a Transformation Table route to voicemail transformation.This transformation retreives the callee's UMbox, sets the diversion, and sends the call to Exchange.

2. Create the voicemail Transformation Table Entries as below.

   Caption
   0 Table 1 Create Transformation Table
   InputField Type Input Field Value Output Field Type Output Field Value Match Type Example Description Called Address/Number ==telephoneNumber== Called Address/Number msRTCSIP-Line= Optional Query the called number against the AD attribute mobile Called Address/Number =mobile== Called Address/Number =msRTCSIP-Line= Optional Query the called number against the AD attribute telephoneNumber Called Address/Number ==msRTCSIP-Line== Called Address/Number =msRTCSIP-Line= Optional Query the called number against the AD attribute msRTCSIP-Line Called Address/Number \+.*(\d{4}) Redirecting Number \1 Optional Trim the returned value to length of the EUM dialplan digits (default 4), place in the Diversion IE. User Value 1 (.*) Called Address/Number \1 Mandatory Set the Called Number IE to the EUM SA number (store in UserValue1)

3. Add an entry to the main Action Set to route unanswered Lync analog calls to Exchange voicemail. Select the Transformation Table and Action on Success.
   

   Pagebreak