...
Add_workflow_for_techpubs |
---|
AUTH2 | UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'} |
---|
AUTH1 | UserResourceIdentifier{userKey=8a00a0c857f0393d015845e3e4d4000f8a00a02355cd1c2f0155cd26cb41059c, userName='null'} |
---|
JIRAIDAUTH | SYM-2419527506 |
---|
REV5 | UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'} |
---|
REV6 | UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cd5909df8a00a0c85b2726c2015b58aa779d0003, userName='null'} |
---|
REV3 | UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26c7ca00388a00a02355cd1c2f0155cd26ca2f03d1, userName='null'} |
---|
REV1 | UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cc5207f0, userName='null'} |
---|
|
...
The SBC Easy Config interface includes a built-in, step-by-step setup configuration wizard to enable quick and easy deployment of an SBC and Skype for Business/Lync in a Microsoft Teams environment.
...
- ATT SIP Trunk
- KDDI SIP Trunk
- NTT DOCOMO Officelink
- Other SIP Trunk
- Softbank White Office
- Telstra Enterprise SIP Connect
- Verizon SIP Trunk
Info |
---|
NTT DOCOM DOCOMO Officelink, Softbank White Office and Telstra Enterprise SIP Connect are supported in the SBC Edge 1000-2000 only. |
Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.
Step 1 - Select Scenario
Info |
---|
These instructions assume the SBC Easy Config wizard is running. See Using the Easy Configuration Wizard. |
...
Select the Application type (SIP Trunk↔ Microsoft Teams). Specify the scenario details in the fields that apply for your deployment. When you have selected values for all fields, click Next to move to Step 2. Or, click Cancel to return to the main WebUI screen.
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Type up to 32 characters as a descriptive name for the SIP Trunk ↔ Microsoft Teams scenario. Info |
---|
The Easy Config adds the scenario description as a prefix for all SBC configuration elements created for this deployment. |
|
...
Info |
---|
The E911 ELIN number from the "CompanyName" field configured in Lync location services is used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Setup. For more information, see Creating and Modifying Entries to Transformation Tables. |
Emergency Callback Number 1
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP trunk used for connection to the Microsoft On Premises Teams environment. Valid options are: ATT SIP Trunk, KDDI SIP Trunk, NTT DOCOMO Officelink, Other SIP Trunk, SoftBank White Office, Telstra Enterprise SIP Connect, and Verizon SIP Trunk. The SIP Trunk selected determines the field options displayed in Step 2. For more information, refer to Step 2 - Configure SIP Details for Endpoint. |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Defines the calling client user type. Valid options: Microsoft Teams |
Step 2 - Configure SIP Details for Endpoint
Specify the scenario configuration details based on the SIP Trunk selected in Step 1 - Select Scenario. Once completed, click Next to move to Step 3. (Or, click Previous to return to the previous screen).
ATT SIP Trunk - Field Definitions
These fields apply if you selected ATT SIP Trunk in Step 1 - Select Scenario.
Caption |
---|
| Image Removed
Image Added |
Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN or IP address of the Session Border Controller Remote Peer service provider. |
Protocol
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enables or disables the secondary Session Border Controller secondary Remote Peer service provider configured. |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Click the drop-down arrow to select the external (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com |
...
Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid selections: Enable: Network Address Translation is used for the NAT device's Public IP address. Disable: Network Address Translation address translation is not used. NOTE: This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge for NAT Traversal. |
Public IP Address
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 2: sip2.pstnhub.microsoft.com |
...
Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
Apply ACL
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 3: sip3.pstnhub.microsoft.com |
...
Specifies whether an ACL (Access Control List) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid selection: True: Applies the ACL False: Does not apply the ACL. For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
Server Pool Host 1
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded federated FQDN for use with Microsoft Teams Direct Routing: sip-allfor the location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com |
...
Server Pool Host 2
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
HardHard-coded value for protocol used with federated FQDN: TLS |
...
FQDN for the location of the server list for Server Pool Host 2: sip2.pstnhub.microsoft.com |
Server Pool Host 3
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard Hard-coded value FQDN for the port used for TLS: 5061 |
KDDI SIP Trunk - Field Definitions
These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | KDDI SIP Trunk |
---|
3 | KDDI SIP Trunk |
---|
|
Image Removed |
SIP Server
location of the server list for Server Pool Host 3: sip3.pstnhub.microsoft.com |
Federated FQDN
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded federated FQDN for use with Microsoft Teams Direct Routing: sip-all.pstnhub.microsoft.com |
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Type the FQDN for the service provider's SIP server. |
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hardcoded to UDP. |
...
Hard-coded value for protocol used with federated FQDN: TLS |
Port
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Type Hard-coded value for the port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
Main Telephone Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The main telephone number associated with the KDDI SIP trunk. |
...
KDDI SIP Trunk - Field Definitions
These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | KDDI SIP Trunk |
---|
3 | KDDI SIP Trunk |
---|
|
Image Added |
SIP Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Type the city code and office code for setting up transformation rules for the FMC service. |
...
FQDN for the service provider's SIP server. |
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Type the Address of Record of the client that is registered on the SIP server. |
...
Port Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Type the port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
Main Telephone Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The main telephone number associated with the KDDI SIP trunk. |
Called Prefix (FMC Service)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Type the city code and office code for setting up transformation rules for the FMC service. |
Address of Record URI
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Type the Address of Record of the client that is registered on the SIP server. |
Static Host (SIP Profile)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Type the host and host and port information for the FQDN or IP address used in the From Header. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port |
...
Caption |
---|
0 | Figure |
---|
1 | Add Split DNS Entry |
---|
|
|
NTT DOCOMO Officelink- Field Definitions
...
Caption |
---|
0 | Figure |
---|
1 | NTT DOCOMO Officelink Trunk |
---|
|
Image Removed |
Signaling/Media Source IP (Microsoft Teams Direct Routing)
Office Link FOMA-R
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Host Click the drop-down arrow to select the external (Internet-facing) IP address of the SIP Server. |
Protocol
Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
Outbound NAT Traversal
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol used for sending and receiving SIP messages between SBC and the SIP Server. Default value: UDP. |
Port Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Server Port number used for sending and receiving SIP messages between SBC and the SIP Server. Default value: 5062. |
CUG Domain Name
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN of the SIP Server. |
...
Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid selections: Enable: Network Address Translation is used for the NAT device's Public IP address. Disable: Network Address Translation address translation is not used. NOTE: This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge for NAT Traversal. |
Public IP Address
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Click the drop-down arrow to select the external (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
...
Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
Apply ACL
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com |
...
Specifies whether an ACL (Access Control List) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid selection: True: Applies the ACL False: Does not apply the ACL. For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
Server Pool Host 1
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 21: sip2 sip.pstnhub.microsoft.com |
Server Pool Host
...
2
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
HardHard-coded FQDN for the location of the server list for Server Pool Host 32: sip3 sip2.pstnhub.microsoft.com |
...
Server Pool Host 3
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 3: sip3.pstnhub.microsoft.com |
Federated FQDN
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded federated FQDN for use with Microsoft Teams Direct Routing: sip-all.pstnhub.microsoft.com |
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded value for protocol used with federated FQDN: TLS |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
HardHard-coded value for the port used for TLS: 5061 |
...
NTT DOCOMO Officelink- Field Definitions
These fields apply if you selected Other SIP Trunk in NTT DOCOMO Officelink in Step 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | Other SIP NTT DOCOMO Officelink Trunk |
---|
|
Image Removed |
...
Image Added |
Office Link FOMA-R
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN or Host IP address of the Session Border Controller service providerSIP Server. |
...
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The The IP protocol used for sending and receiving SIP messages between SBC and the Border Element SIP Server. Valid entry UDP or TCP.Default value: UDP. |
Port
...
Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element SIP Server. |
...
CUG Domain Name
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Enables or disables the secondary Session Border Controller service provider configured. |
...
The FQDN of the SIP Server. |
Signaling/Media Source IP (Microsoft Teams Direct Routing)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
...
Click the drop-down arrow to select the external (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
Outbound NAT Traversal
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
Port Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The Port Number used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
...
Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid selections: Enable: Network Address Translation is used for the NAT device's Public IP address. Disable: Network Address Translation address translation is not used. NOTE: This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge for NAT Traversal. |
Public IP Address
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Click the drop-down arrow to select the external (Internet-facing) Specifies the Public IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
...
the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
Apply ACL
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com |
Server Pool Host 2
Specifies whether an ACL (Access Control List) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. I Valid selection: True: Applies the ACL False: Does not apply the ACL. For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
Server Pool Host 1
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com |
Server Pool Host 2
Panel |
---|
|
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 2: sip2.pstnhub.microsoft.com |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 3: sip3.pstnhub.microsoft.com |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded federated FQDN for use with Microsoft Teams Direct Routing: sip-all.pstnhub.microsoft.com |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded value for protocol used with federated FQDN: TLS |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded value for the port used for TLS: 5061 |
...
Other SIP Trunk - Field Definitions
These fields apply if you selected SoftBank White Office in Other SIP Trunk in Step 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | SoftBank White Office |
---|
|
Image Removed |
...
|
Image Added |
Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN or IP address of the Remote Peer service provider. |
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The method used for connecting networks. Options are: Routerless and Router. On selection of Routerless, the Easy Config displays the Signaling/Media Source IP field and the SIP Server field. On selection of Router, the Easy Config displays the SIP Server field only. |
...
IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP. |
Port Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Click the arrow and select the user-specified IP address to be used for SIP signaling messages. The Signaling/Media Source IP field does not display when the option selected for the WAN Link field is Router. |
...
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
Use Secondary Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The host IP address or FQDN for the SIP server |
...
Enables or disables the secondary Remote Peer service provider configured. |
Secondary Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The ID used for authenticating with the router at the gateway of the network |
...
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The password Protocol used for authenticating with the router at the gateway of the network. |
...
communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
Port Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Re-entry of the password for the router serving as network gateway. |
Address of Record URI (Contract Registrant Entry)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The public address that points to the domain for users, for use in the Contact Registrant Entry. For example, enter GatewayID@SIPServerThe Port Number used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
Signaling/Media Source IP (Microsoft Teams Direct Routing)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Click the drop-down arrow to select the external (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
...
Outbound NAT Traversal
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com |
...
Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid selections: Enable: Network Address Translation is used for the NAT device's Public IP address. Disable: Network Address Translation address translation is not used. NOTE: This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge for NAT Traversal. |
Public IP Address
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 2: sip2.pstnhub.microsoft.com |
...
Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
Apply ACL
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 3: sip3.pstnhub.microsoft.com |
...
Specifies whether an ACL (Access Control List) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid selection: True: Applies the ACL False: Does not apply the ACL. For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
Server Pool Host 1
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded federated FQDN for use with Microsoft Teams Direct Routing: sip-allthe location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com |
...
Server Pool Host 2
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
HardHard-coded value for protocol used with federated FQDN: TLS |
...
FQDN for the location of the server list for Server Pool Host 2: sip2.pstnhub.microsoft.com |
Server Pool Host 3
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded value FQDN for the port used for TLS: 5061 |
...
location of the server list for Server Pool Host 3: sip3.pstnhub.microsoft.com |
Federated FQDN
These fields apply if you selected Telstra Enterprise SIP Connect in Step 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | Telstra Enterprise SIP Connect |
---|
|
Image Removed |
NAT Public Interface
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The public interface used for Network Address Translation (NAT). |
...
Hard-coded federated FQDN for use with Microsoft Teams Direct Routing: sip-all.pstnhub.microsoft.com |
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The state to use in configuring the outbound proxy for the Provider SIP Trunk. Options include: Australia Capital Territory, New South Wales, Northern Territory, Queensland, South Australia, Tasmania, Victoria, and Other (a user-specified FQDN). |
...
Hard-coded value for protocol used with federated FQDN: TLS |
Port
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard coded as UDP and Port 5060. |
SIP Connect DNS IP
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IPv4 address used to create a Split DNS entry for the Telstra domain. |
...
Hard-coded value for the port used for TLS: 5061 |
SoftBank White Office - Field Definitions
These fields apply if you selected SoftBank White Office in Step 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | SoftBank White Office |
---|
|
Image Added |
WAN Link
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Connect Domain or Realm to which the specified IP address will map. |
Authentication User ID (SIP Connect Authentication)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The User ID for use in authentication. |
...
method used for connecting networks. Options are: Routerless and Router. On selection of Routerless, the Easy Config displays the Signaling/Media Source IP field and the SIP Server field. On selection of Router, the Easy Config displays the SIP Server field only. |
Signaling/Media Source IP
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The password to use when authenticating with the User ID. |
...
Click the arrow and select the user-specified IP address to be used for SIP signaling messages. The Signaling/Media Source IP field does not display when the option selected for the WAN Link field is Router. |
SIP Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The re-entered password for confirmation. |
...
host IP address or FQDN for the SIP server |
Gateway ID (Remote Authorization Entry)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The 9-digit pilot number Telstra assigned for use with the SIP Connect trunking service. |
...
ID used for authenticating with the router at the gateway of the network |
Gateway Password
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Click the drop-down arrow to select the external (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
...
The password used for authenticating with the router at the gateway of the network. |
Confirm Password
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location Re-entry of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com |
...
password for the router serving as network gateway. |
Address of Record URI (Contract Registrant Entry)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 2: sip2.pstnhub.microsoft.com |
...
The public address that points to the domain for users, for use in the Contact Registrant Entry. For example, enter GatewayID@SIPServer. |
Signaling/Media Source IP (Microsoft Teams Direct Routing)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 3: sip3.pstnhub.microsoft.com |
...
Click the drop-down arrow to select the external (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
Outbound NAT Traversal
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded federated FQDN for use with Microsoft Teams Direct Routing: sip-all.pstnhub.microsoft.com |
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded value for protocol used with federated FQDN: TLS |
Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid selections: Enable: Network Address Translation is used for the NAT device's Public IP address. Disable: Network Address Translation address translation is not used. NOTE: This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge for NAT Traversal. |
Public IP Address
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded value for the port used for TLS: 5061 |
...
Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
Apply ACL
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies whether an ACL (Access Control List) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid selection: True: Applies the ACL False: Does not apply the ACL. For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
Server Pool Host 1
These fields apply if you selected Verizon SIP Trunk in Step 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | Verizon SIP Trunk |
---|
|
Image Removed |
Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN or IP address of the Session Border Controller service provider. |
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol to use for sending and receiving SIP messages between SBC and the Border Element Server. This value is fixed at UDP. |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
...
Hard-coded FQDN for the location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com |
Server Pool Host 2
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 2: sip2.pstnhub.microsoft.com |
Server Pool Host 3
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 3: sip3.pstnhub.microsoft.com |
Federated FQDN
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded federated FQDN for use with Microsoft Teams Direct Routing: sip-all.pstnhub.microsoft.com |
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded value for protocol used with federated FQDN: TLS |
Port
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded value for the port used for TLS: 5061 |
Telstra Enterprise SIP Connect - Field Definitions
These fields apply if you selected Telstra Enterprise SIP Connect in Step 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | Telstra Enterprise SIP Connect |
---|
|
Image Added |
NAT Public Interface
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The public interface used for Network Address Translation (NAT). |
State
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The state to use in configuring the outbound proxy for the Provider SIP Trunk. Options include: Australia Capital Territory, New South Wales, Northern Territory, Queensland, South Australia, Tasmania, Victoria, and Other (a user-specified FQDN). |
Protocol and Port
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard coded as UDP and Port 5060. |
SIP Connect DNS IP
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IPv4 address used to create a Split DNS entry for the Telstra domain. |
SIP Connect Domain/Realm
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Connect Domain or Realm to which the specified IP address will map. |
Authentication User ID (SIP Connect Authentication)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The User ID for use in authentication. |
Authentication Password
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The password to use when authenticating with the User ID. |
Confirm Password
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The re-entered password for confirmation. |
Trunk Pilot Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The 9-digit pilot number Telstra assigned for use with the SIP Connect trunking service. |
Signaling/Media Source IP (Microsoft Teams Direct Routing)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Click the drop-down arrow to select the external (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
Outbound NAT Traversal
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid selections: Enable: Network Address Translation is used for the NAT device's Public IP address. Disable: Network Address Translation address translation is not used. NOTE: This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge for NAT Traversal. |
Public IP Address
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
Apply ACL
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies whether an ACL (Access Control List) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid selection: True: Applies the ACL False: Does not apply the ACL. For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
Server Pool Host 1
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com |
Server Pool Host 2
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 2: sip2.pstnhub.microsoft.com |
Server Pool Host 3
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 3: sip3.pstnhub.microsoft.com |
Federated FQDN
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded federated FQDN for use with Microsoft Teams Direct Routing: sip-all.pstnhub.microsoft.com |
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded value for protocol used with federated FQDN: TLS |
Port
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded value for the port used for TLS: 5061 |
Verizon SIP Trunk - Field Definitions
These fields apply if you selected Verizon SIP Trunk in Step 1 - Select Scenario.
Caption |
---|
0 | Figure |
---|
1 | Verizon SIP Trunk |
---|
|
Image Added |
Border Element Server
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The FQDN or IP address of the Remote Peer service provider. |
Protocol
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The IP protocol to use for sending and receiving SIP messages between SBC and the Border Element Server. This value is fixed at UDP. |
Port Number
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
Signaling/Media Source IP (Microsoft Teams Direct Routing)
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Click the drop-down arrow to select the external (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
Outbound NAT Traversal
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid selections: Enable: Network Address Translation is used for the NAT device's Public IP address. Disable: Network Address Translation address translation is not used. NOTE: This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge for NAT Traversal. |
Public IP Address
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
Apply ACL
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Specifies whether an ACL (Access Control List) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid selection: True: Applies the ACL False: Does not apply the ACL. For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control ListsClick the drop-down arrow to select the external (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
Server Pool Host 1
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 1: sip.pstnhub.microsoft.com |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 2: sip2.pstnhub.microsoft.com |
...
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded FQDN for the location of the server list for Server Pool Host 3: sip3.pstnhub.microsoft.com |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded federated FQDN for use with Microsoft Teams Direct Routing: sip-all.pstnhub.microsoft.com |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded value for protocol used with federated FQDN: TLS |
Panel |
---|
bgColor | #FAFAFA |
---|
borderStyle | none |
---|
|
Hard-coded value for the port used for TLS: 5061 |
...