Page History

Include Page
_media_outage_Swe _media_outage_Swe

...

borderColor	green
bgColor	transparent
borderWidth	2

Back to Table of Contents

Back to Installing SBC SWe Software

...

The 

Spacevars
0 longproductproduct2

 is deployed in a redundant High Availability (HA) configuration whereby a standby virtual machine (VM) protects the active VM. The HA configuration shares the data between the VMs which protect each other in a 1-1 redundancy model.

Note
It is recommended that HA pair needs to be installed on two different physical hosts. For more information on setting up logical connections HA nodes, see refer to Setting Up Logical Connection between High Availability Nodes.

The following procedure describes how to install the

Spacevars
0 product

application software on HA system (both active and standby VM).

...

Note
title Keystroke Errors After OS Installation
If you are using a wide-area or low-bandwidth connection, the time delay over the network may be long enough to cause the virtual machine to start auto-repeat. This can manifest in unintended repeated keystrokes when typing in a remote console. If you experience this issue, refer to the VMware Knowledge Base for a solution.

Procedure

1. Launch the EMA. See Refer to Logging on to EMA in Platform Mode for guidance.

2. Navigate to Administration > System Administration > Software Install/Upgrade tab. The Packages screen displays.

3. Select the Package Name to install and then click Install Software.
   

    

   Caption
   0 Figure 1 Selecting SBC Package

   
   The Install Software section pane expands and displays the Install Version, Management Ports (configured in post-OS installation) and System Configuration details.

   Caption
   0 Figure 1 Install SBC Application

   Note
   The signature file of the SBC package verifies the integrity of the package contents before proceeding with the SBC installation.

4. Enter the System Configuration details.

   1. Select HA Pair in the HA Configuration field.
   2. Select System Name field and enter the system name.
   3. Select Local Hostname and enter local hostname.

   4. Select Peer Hostname and enter peer hostname.
      
      

      Note
      For more information, refer to System Name and Hostname Naming Conventions.

      Caption
      0 Figure 1 Installation System Configuration ScreenPane

   5. Choose Active option for Server Role to designate the Active server as the one you are configuring.

   6. Keep default Active Primary CE IP.
   7. Keep default Standby Primary CE IP.
   8. Keep default Inter CE Prefix. The inter CE prefix is the netmask of the network in which the Inter CE IPs are configured.
   9. Use default TIPC NETID value (1500) if no other SBC SWe running in the same subnet.
   10. Select NTP Server IP field and enter the NTP server IP address.
   11. Select NTP Server Time Zone field and enter the NTP time zone.
       
       

5. Click Start Installation.

    

   Caption
   0 Figure 1 Starting the Start Installation

6. The installation process starts and displays the installation status on the Installation Log section.

   1. Perform pre-install checks.
      
      

      Caption
      0 Figure 1 Pre-Install Checks

   2. Extract the package contents.

      Caption
      0 Figure 1 Extracting Package Contents

   3. Install SBC service.

      Caption
      0 Figure 1 Installing SBC Service

      Note
      The installation checks whether ConnexIP OS version is compatible with the SBC application. If the OS upgrade is required, it performs the OS upgrade first and reboots the server. Once it is rebooted, login into the EMA again to continue with the SBC application.

   4. Initialize SBC service.

      Caption
      0 Figure 1 Initialize SBC Service

   5. Update Host Name

      Caption
      0 Figure 1 Updating Host Name

   6. Reboot system.

      Caption
      0 Figure 1 Reboot

7. Log on to EMA platform. The new SBC application version displays on the Monitoring > Dashboard > System and Software Info.
   
   

   Caption
   0 Figure 1 Displaying New SBC App Version

8. Verify the system status using Administration > System Administration > Platform Management menu.
   
   

   Caption
   0 Figure 1 Verifying System Status

9. From the EMA, install the SBC licenses required in order to use SBC application and its features. See Managing SBC Node-Locked Licenses for HW and SWe SBCs for guidance.

    

   Note
   Continue upgrading the standby server once all the status is up and running.

10. Repeat steps 2 through 8 to install the

    Spacevars
    0 prodkey

     application on the Standby peer, but with the following changes to steps 4c to 4e:

    • Step 4c. Enter Standby server name in Local Hostname field, which is typically the System Name with a letter b appended to the end.

    • Step 4d. Enter Active server name for Peer Hostname field, which is typically the System Name with a letter a appended to the end.

    • Step 4e. Choose the "Standby" option for Server Role to designate the Standby server as the one you are configuring.

    Note
    You must use the same System Name and TIPC NETID for both active and standby servers.

    Caption
    0 Figure 1 Configuring Standby Server

11. Once the installation is completed, verify the system status for both "Active" and "Standby" servers using Monitoring> Dashboard> System and Software Info menu.

    Caption
    0 Figure 1 Verifying System Status for Active Server

    Caption
    0 Figure 1 Verifying System Status for Standby Server

...