Page History

Add_docset_workflow

APPRJID	SYM-18554, SYM-18555
AUTH1	ecostagutaUserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cdb30a7c, userName='null'}
DEV1	allenmUserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cc7d083d, userName='null'}
LDEV1	ecostagutaUserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cdb30a7c, userName='null'}
SVT1	kravetslUserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ce890bc7, userName='null'}
LSVT1	ecostagutaUserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cdb30a7c, userName='null'}
AUTHJID	SYM-18553

Panel

In this section:

Table of Contents

maxLevel	3

...

Packet capture durations should be configured for the minimum amount of time necessary to capture the problem attempting to be reproduced.
When capturing a Media and/or SIP Signaling file, appropriate filters should be selected to minimize the volume of packets that must be captured. In particular, the following two filters should be utilized for Media and/or SIP Signaling file:
- TCP/UDP Port filters
  Up to four filters can be listed. Separate the filters by using a comma.
- Host IP address
  Up to two IP addresses can be configured. If possible, the host IP addresses should be used against termination points that are only terminating a single call.
  
  Info
  For each IP address entered (Host 1 or Host 2) a new option will become available to select capture direction.
  Panel
  borderStyle none
  Caption
  0 Figure
  1 Other Options Menu
  Pagebreak

Maximum Duration

Warning
The Packet Capture feature is intended for short duration packet captures. For that reason, a maximum duration of 120 minutes (2 hours) is permitted.

...