Parameter | Description |
|---|
Name | Specifies the name of the H323 Trunk Group. |
State | The administrative state of the H 323 Trunk Group: - Disabled (default)
- Enabled
|
Mode | The operation mode of the H 323 trunk group - Out of Service (default)
- In Service
|
Action | The action for the operation mode for this H323 trunk group. - Dryup—all calls are allowed to complete until TIMEOUT expires.
- Force—all calls are dropped immediately.
- Undefined—no action is taken
|
Dry Up Timeout | The time (in minutes) to wait for active calls to finish. Default is 5 minutes. |
Sending Complete Enbloc | Specifies whether to send the complete IE in enbloc SETUP message. The options are: |
Parent shared Cac Limits Pool Name | Specifies an existing shared CAC pool. |
| Policy |
| Carrier | The four-digit carrier code. |
| Country | Specifies the Country Code to be used for this policy. Click Select to choose the country code you want to choose. |
Localization Variant | Indicates the variant used by the Policy in call processing. Possible values: - North America (USA, Canada, and the Caribbean)
- Generic (all countries outside of North America except Japan)
|
Digit Parameter handling | Digital Parameter Handling parameters: - Numbering Plan
—A unique identifier for the numbering plan. - Ingress DM PM Rule
—The name of the ingress DM/PM (digit manipulation/ parameter manipulation) rule, up to 23 characters. - Egress DM PM Rule
—The name of the egress DM/PM rule.
|
Call Routing | Call Routing parameter: - Element Routing Priority
—The Element Routing Priority table indicates what originating Call Processing Elements types (including "none") should be used to determine matching routing table entries.
|
Media | Media parameter: - Packet Service Profile
—The packet service profile entry used to identify a particular packet service profile. - Tone and Announcement Profile
—Specifies the name of the Tone and Announcement Profile used.
|
Services | Service parameters: - Class of Service
—Specifies the class of service to be used
|
| Signaling | Signaling Profiles: - IP Signaling Profile
—The name of this IP signaling profile.
|
| Ingress | Flags: - Non Zero Video Bandwidth Based Routing For Sip—
- Non Zero Video Bandwidth Based Routing for H323 —
|
| Packet Outage |
Minimum Duration | Specifies the period of outage for a call, in milliseconds, for that call to be counted as part of the packet outage detection algorithm. Must be 0-65535, default is 6000 (milliseconds). |
Minimum Calls | Specifies, for the current interval, the number of calls with outages that are required to declare a packet outage event. Must be 0-65535, default is 1000 (calls). |
Bandwidth Limit Reduction | Specifies the amount to reduce the bandwidth limit (as a percentage of the configured limit) when a packet outage is detected. Must be 0-100, default is 50 (percent). |
Detection State | Specifies the administrative state of packet outage detection: - Enabled—automatic bandwidth reduction will occur when a packet outage is detected
- Disabled (default)
—packet outages are not detected and the maximum bandwidth limit is restored
|
Detection Interval | Specifies the time interval, in minutes, for detecting packet outages via the packet outage detection algorithm. Must be 5-1440, default is 15 (minutes). |
| Call Reservation |
| Parameters for reserving a portion of the resources for specific call direction or type for this H323 trunk group. Specify the following call reservation parameters. |
| Inbound | Percentage of call Limit reserved for handling inbound calls. This is the percentage of channels reserved for handling inbound calls. Default is 0%. Percentage selection allowed in 5% increments. Enter value in 5% increments in range of (0-100) percent. |
State | Administrative state of the call reservation. - Enabled
- Disabled (default)
|
Priority Call Minimum | The number of priority call allowed when reservations are enabled for this trunk group. Enter value in range of 0-100. Default is 1. |
Incoming Call Minimum | The number of incoming call allowed when reservations are enabled for this trunk group. Enter value in range of 0-128. Default is 1. |
Outgoing Call Minimum | The percent of outgoing call allowed when reservations are enabled for this trunk group. Enter value in range of 0-100. Default is 10. |
| SILC | SILC traffic control configuration. Specify the following SILC parameters: - MC1Percent—The percentage of calls to accept when the machine congestion level is 1. Enter value in range of 0-100 percent. Default is 75.
- MC2Percent—The percentage of calls to accept when the machine congestion level is 2. Enter value in range of 0-100 percent. Default is 25.
- State—Administrative state to enable/disable the SILC traffic control.
|
| CAC |
Call Limit | The total number of concurrent calls (either ingress or egress) allowed. Enter unlimited or value in range of 0-2147483647. |
Bandwidth Limit | Total media bandwidth limit (in K bits/sec). Enter unlimited or value in range of 0- 2147483647. |
Call Limit Threshold | Specifies the call utilization notification threshold limit. The value range from 0 to 100. |
Bandwidth Limit Threshold | Specifies the bandwidth utilization notification threshold limit. The value range from 0 to 1000. |
| Ingress |
| Call Rate Max | Specifies the value of maximum allowed burst in calls/second (above the allowed sustained rate) for ingress call attempts. The default value is unlimited (range: 1-450, or unlimited. SBC 7000 range is 1-1350, or unlimited). |
| Call Burst Max | Specifies the value of maximum allowed burst (above the allowed sustained rate) for ingress call attempts in calls/second. The default value is unlimited (range: 1-900, or unlimited. SBC 7000 range is 1-2700, or unlimited). |
| Egress |
| Call Limit | Specifies the total number of calls allowed for Egress |
| Call Rate Max | Specifies the value of maximum allowed burst in calls/second (above the allowed sustained rate) for egress call attempts. The default value is unlimited (range: 1-450, or unlimited. SBC 7000 range is 1-1350, or unlimited). |
| Call Burst Max | Specifies the value of maximum allowed burst (above the allowed sustained rate) for egress call attempts in calls/second. The default value is unlimited (range: 1-900, or unlimited. SBC 7000 range is 1-2700, or unlimited). |
| Qoe |
| Min Time To Proceed | Specifies the minimum time period before the call admission can start after any of the TG's KPI fall below the critical threshold. The value range from 0 to 3600 |
| Rfactor |
| Critical Qos Rfactor Limit | Specifies the critical R-Factor limit, below which the call admission should be stopped if it is an incoming TG and also marked OOS. If this does not return a policy response in a routing label, this field will not be chosen for routing. The value range from 0 to 100. |
| Major Qos Rfactor Limit | Specifies the major R-Factor limit, below which the call admission should be reduced. This is just an info level log. \The value range from 0 to 100. |
| Asr |
Default Qos Asr | Specifies the default value to be used as ASR when no calls are made for a sampling period. The value range from 0 to 100. |
Critical Qos Asr Limit | Specifies the critical ASR limit below which, the call admission should be stopped. The value range from 0 to 70. |
Major Qos Asr Limit | Specifies the major ASR limit below which, the call admission should be reduced. The value range from 0 to 90. |
| Scru |
| Critical Qos Scru Limit | Specifies the critical Sustained Call Rate Utilization(SCRU) limit below which, the call admission should be stopped. The value range from 80 to 100. |
| Clu |
| Critical Qos Clu Limit | Specifies the critical Call Limit Utilization(CLU) below which, the call admission should be stopped. The value range from 80 to 100. |
| pgrd |
| Critical Qos Pgrd Limit | Specifies the critical Post Gateway Ringing Delay limit above which, the call admission should be stopped. The value range from 50 to 10000. |
| Default Pgrd Factor | Specifies the default value to be used as the Post Gateway Ringing delay when no calls are made for a sampling period. The value range from 50 to 10000. |
| Services |
| Overlap Dialing |
|
| Overlap State | Determines if the overlap is supported or not. Select one of the option: enable/ disable. |
| Min Digits for Query | This parameter controls the number of called address digits to be collected before performing the 1st policy query during overlap receiving. If this is 0, then this parameter is irrelevant in controlling policy query. |
| Long Duration Call |
|
| Ldc Timeout | Specifies the timeout value of the long duration call timer in minutes. |
| Ldc Action | Specifies the action to take if the long duration call timer. |
Ldc Rel Cause | Specifies the Q.850 release value to use should the call be released due to long duration call timer expiry. |
Ldc Emergency Calls | Specifies whether the Emergency Calls should be excluded from Long Duration Call
Disconnect procedures or not. The options are: |
| Media |
Media IP Interface Group Name | Specifies the Interface group to be used for media. |
Source Address Filtering | If enabled, filter out incoming media packets which do not match the expected source IP address and UDP port. |
Direct Media Allowed | If enabled, attempts to set up a direct-media path so that media flows directly between endpoints in the same direct-media group. If disabled, set up the path so that media transverses the SBC. |
Direct Media Group ID | Specifies the direct media group to which this trunk group belongs. The value range from 0 to 65535. The default value is 0. |
Pre allocate Res Pad | Specifies whether a resource pad is pre-allocated during an incoming fast start call procedure that results in G.711 codec selected for the call or not. The options are: |
| Slow Start | Specifies whether an ingress H245 Slow Start should be converted to a forward offer at egress (e.g. Fast Start) or passed thru as a reverse offer (e.g. Slow Start). The options are: - Convert (default)
- Passthru
|
| Call Routing |
Ans Supervision Timeout | This is the maximum time (in seconds) from egress call setup to egress receiving an answer. |
Crank Back Profile | Specifies the name of the Crank Back profile. |
Respect Bearer Capability | Specifies whether to accept unchanged the Bearer Capability Information element values received in H.225 SETUP or not. The options are: |