Page History

Installing licenses allows you to use SBC SWe Edge features. You can choose to go with the NLL method or the NWDL method. Licenses applied to the Active instance are replicated to the Standby instance. 

(optional) Installing a Node-Locked License 

If you choose to go with the NLL method, you must upload the NLL license file to the Active instance. 

(optional) Installing a Network-Wide Domain License 

If you choose to go with the NWDL method, you must connect your SWe Edge HA pair to RAMP and associate the NWDL license with your SBC SWe Edge HA pair through RAMP.  The following workflow defines the procedures for installing an NWDL license.

Workflow

Connecting an SBC SWe Edge HA Pair to RAMP 

Anchor
Connecting an SBC SWe Edge HA Pair to RAMP-NWDL Connecting an SBC SWe Edge HA Pair to RAMP-NWDL

For information on how to connect an SBC SWe Edge HA pair to RAMP, refer to: Connecting an SBC SWe Edge HA Pair to RAMP in the Manage an SBC SWe Edge HA Pair through RAMP page.

Associating an NWDL License with the Active Instance of an SBC SWe Edge HA Pair through RAMP 

Anchor
Associating an NWDL License with the Active Instance of an SBC SWe Edge HA Pair through RAMP Associating an NWDL License with the Active Instance of an SBC SWe Edge HA Pair through RAMP

For information on how to associate licenses with a device through RAMP, refer to: Associate NWDL Licenses.

Verifying an NWDL License on the Active Instance 

Anchor
Verifying an NWDL License on the Active Instance Verifying an NWDL License on the Active Instance

 Start

1. Log in to the Active instance.
2. Click the Settings tab at the top of the WebUI.
3. In the left navigation pane,

1. select System > Licensing > Current Licenses. The Current Licenses pane opens on the right.
2. In the Feature Licenses section, verify the NWDL license count that is currently available on the system is as required.
   Image Modified