Page History

...

During the

To Create a Config-drive Image

Use one of the following procedures procedure to manually create a config-drive image.

Using the cloud-localds Command

...

1. Log into an external Linux-based system.

2. Enter the following

...

cloud-localds vendorconfig.iso user_data

1. commands to navigate to the appropriate directory and create the folder structure.

   Code Block
   mkdir config_drive mkdir config_drive/openstack mkdir config_drive/openstack/<creation date> cd config_drive/openstack/ ln -s <creation date> latest

   
   

2. Enter the following command to navigate to the appropriate directory.

   Code Block
   cd config_drive/openstack/latest

   
   

3. Enter the uuid information in the meta_data.json file using the following format, where <SBC_SWe_Lite_FQDN> is the FQDN of the node you want configured (for example, instance1.mydomain.com).

   Code Block
   { <uuid>: <SBC_SWe_Lite_FQDN> }

   
   

4. Create the user_data file. Use the following example to create the user_data file specific to the system you want configured. For the list of supported user_data file parameters, refer to the User_data File Parameters table.

   Code Block
   title Example
   { "setup": { "admin_account": { "adminUserName": "admin", "adminUserPassword": "admin" },

After you create the ISO file, enter the following commands to attach it to either the KVM Hypervisor, VMware, or Hyper-V.

 <disk type="file" device="cdrom">
      <driver name="qemu" type="raw" cache="none" />
      <source file="/var/third-party/vendorname/vendorconfig.iso" />
      <readonly />
      <target dev="vdc" />
  </disk>

...

Boot the

Creating the ISO Image Manually

1. Log into either the KVM Hypervisor, VMware, or Hyper-V host.

2. Enter the following commands to navigate to the appropriate directory.

   Code Block
   mkdir config_drive mkdir /config_drive/openstack mkdir /config_drive/openstack/<creation date> cd /config_drive/openstack/ ln -s <creation date> latest

   Enter the following information in the meta_data.json file.

   Code Block
   { <uuid>: <instance12345.mydomain.com> }

   Enter the following information in the user_data file.

   Code Block

   { "setup": { "admin_account": { "adminUserName": "admin", "adminUserPassword": "admin" }, "rest_account": { "restUserName": "rest_user", "restUserPassword": "rest_password" }, "netconfig_account": { "netconfigUserPassword": "netconfig_password" }, "dns": { "primaryDNSServerIP": "125.62.150.2", "secondaryDNSServerIP": "125.62.150.3", "hostName": "SWELite-123", "domainName": "rbbn.com" }, "staticroute": { "defaultGateway": "10.0.1.1", "route1": { "ipDestinationAddr1": "176.159.22.32", "ipDestinationMask1": "255.255.255.255", "ipNexthopAddress1": "10.0.0.1", "ipStaticRouteMetric1": "1" } }, "syslog": { "ServerAddress": "1.1.1.1" }, "ntp": { "Ntp1ServerName": "10.253.6.92", "IsNtp1AuthEnabled": "1", "Ntp1ServerKeyId": "10", "Ntp1ServerKey": "10" }, "mgt0": { "adminIPAddress": "10.21.150.3", "adminNetmask": "255.255.128.0", "MACAddress": "52:54:00:51:2E:4C" }, "pkt0": { "applicationIPV4Address": "192.168.21.2", "applicationIPV4Netmask": "255.255.255.0", "MACAddress": "52:54:00:51:47:4D", "NextHopIP1": "192.168.21.1" }, "pkt1": { "applicationDHCPSuppliedParamUsageeth2DHCPSuppliedParamUsage": "32", "NextHopIP2": "10.0.1.1" }, "pkt2": { "eth2DHCPSuppliedParamUsageeth3DHCPSuppliedParamUsage": "32", "NextHopIP3": "10.0.1.1" }, "pkt3": { "eth3DHCPSuppliedParamUsageeth4DHCPSuppliedParamUsage": "32", "NextHopIP4": "10.0.1.1" }, "edgeview": { "EdgeviewFQDNName": "ev.mydomain.com", "EdgeviewManagementID": "45:34:56:23:45" } } }

   Available_sinceTypeModified ForRelease8.0.3

   } }

   
   The following table outlines the possible parameters of the user_data file.

   Caption
   0 Table 1 User_data File Parameters
   Div ifIpAddrAssignMethodDetermines whether the specific node-level settings are configured dynamically (through DHCP) or statically characters.adminIpAddrAssignMethodEnumadminIPAddress admin adminIpAddrAssignMethod For static addressing, you must use a valid IPv4 address for the adminIPAddress parameter.No15 to applicationIpAddrAssignMethod node-level applicationIPV4Address Ethernet 1 applicationIpAddrAssignMethod parameter use a applicationIPV4Address applicationIPV4Netmask Ethernet 1 field does eth1IpAddrAssignMethod a valid applicationIPV4Netmask applicationDHCPSuppliedParamUsage0Specifies second is configuredeth2IpAddrAssignMethodeth2IPV4Address eth2IpAddrAssignMethod use a eth2IPV4Address eth2IPV4Netmask eth2IpAddrAssignMethod parameter a valid eth2IPV4Netmask eth2DHCPSuppliedParamUsageNextHopIP2 Eth2 pkt2eth3IpAddrAssignMethodeth3IPV4Address eth3IpAddrAssignMethod use a eth3IPV4Address eth3IPV4Netmask eth3IpAddrAssignMethod use a eth3IPV4Netmask eth3DHCPSuppliedParamUsage the DHCP NextHopIP3 Eth3 pkt3 fourth eth4IpAddrAssignMethodeth4IPV4Address eth4IpAddrAssignMethod eth4IPV4Address eth4IPV4Netmask maximum lengthasmIPV4AddressNoneprimaryDNSServerIP IP address (IPv4 format) of the primary DNS server ifIpAddrAssignMethod Setting this field to empty (with static addressing) disables the primary DNS server.Specifies a REST user password to use in subsequent authentications. If this parameter and the restUserName are either empty or not provided, then the SBC does not set up the node for REST access until you create a REST user from the UIntpNoConfigures the MD5 key to authenticate the first staticrouteipDestinationMask115 to ipStaticRouteMetric1 route cost metric value route1 container. Parameter Name Mandatory Data Type Default Value Possible Values Description dns No Enum 0 0 - static 1 - dynamic N/A N/A N/A N/A A container that defines the DNS server details. hostName No String None 64 to maximum length Specifies a hostname for the SBC Edge. The combination of the host and domain names is the FQDN, which must not exceed 255 characters. If the FQDN is not provided then the default hostname is the node serial number. domainName No String None 255 to maximum length Specifies a domain name for the SBC Edge, which the SBC uses only if the IP addressing is static. The combination of the host and domain names is the FQDN, which must not exceed 255 admin_account Yes N/A N/A N/A A container that defines the admin user configurations. characters. primaryDNSServerIP No String 0 0 - static 1 - dynamic Determines whether the specific node-level settings are configured dynamically (through DHCP) or statically. mgt0 Yes N/A N/A N/A Defines the management interface. None 15 to maximum length Sets the IP address (IPv4 format) of the primary DNS server. This field does not apply if the ifIpAddrAssignMethod parameter is set to dynamic. Setting this field to empty (with static addressing) disables the primary DNS server. secondaryDNSServerIP No String None 15 to maximum length Sets the IP address (IPv4 format) of the secondary DNS server. This field does not apply if the ifIpAddrAssignMethod parameter is set to dynamic. adminNetmask Setting this field to empty (with static addressing) disables the secondary DNS server. admin_account Yes N/A N/A N/A A container that defines the admin user configurations. adminUserName Yes String None 32 to maximum length Sets the admin IP subnet. This field does not apply if the adminIpAddrAssignMethod parameter is set to dynamic. For static addressing, you must use a valid IPv4 subnet for the adminNetmask parameter. MACAddress No String None N/A It is optional to enter the MACAddress information of the interface objects (mgt0, pkt0, pkt1, pkt2, and pkt3). If you provide this information, the cloud-init function performs the interface mapping based on the supplied MAC addresses. If you do not provide this information, the interface mapping is performed using the default PCI order. NOTE: You must include the MACAddress information to perform interface mapping. adminDHCPSuppliedParamUsage No Enum 0 0 - USE_ALL 1 - USE_IP_ONLY 2 - USE_IP_DNS_ONLY Determines how the SBC uses the parameters that the DHCP server supplies when a logical interface is configured with Dynamic IP addressing. USE_ALL - The SBC uses all supported DHCP parameters. The SBC uses the supplied DNS servers as global DNS servers, which replace the currently configured DNS servers. This configuration does not affect the split-DNS settings. USE_IP_ONLY - The SBC uses only the IP address and netmask. This configuration ignores the DNS server and other settings, and does not affect the current split-DNS settings. USE_IP_DNS_ONLY - The SBC uses only the IP address, domain-name, and DNS server IP addresses. The SBC uses the supplied domain-name and the DNS server IP addresses depending on the value of the ConfigureSplitDNS parameter. NOTE: If you add the adminDHCPSuppliedParamUsage parameter on any interface, the interface becomes dynamic. configureEth1IF No N/A 0 N/A Specifies that the first packet network is configured. Specifies an administrative username to use in subsequent logins. adminUserPassword Yes String None 128 to maximum length Specifies an administrative user password to use in subsequent logins. netconfig_account No String None N/A A container that defines the netconfig configuration. NOTE: Only Release 8.0.3 and later support the netconfig_account configuration. netconfigUserPassword No String None N/A Overrides the default netconfig password and allows you to set the system without a hardcoded password. rest_account N/A N/A N/A N/A A container that defines the rest account configuration. restUserName No String None 32 to maximum length Specifies a REST username to use in subsequent authentications. If this parameter and the restUserPassword are either empty or not provided, then the SBC does not set up the node for REST access until you create a REST user from the UI. restUserPassword No String None 128 to maximum length Specifies a REST user password to use in subsequent authentications. If this parameter and the restUserName are either empty or not provided, then the SBC does not set up the node for REST access until you create a REST user from the UI. mgt0 Yes N/A N/A N/A A container that defines the management interface. adminIpAddrAssignMethod No Enum 0 0 - static 1 - dynamic Determines whether the specific mgt0 settings are configured dynamically (through DHCP) or statically. pkt0 Yes N/A N/A N/A Defines the first packet network for voice traffic. adminIPAddress No String None 15 to maximum length Sets the admin IP address. This field does not apply if the adminIpAddrAssignMethod parameter is set to dynamic. For static addressing, you must use a valid IPv4 address for the adminIPAddress parameter. adminNetmask No String None 15 to maximum length Sets the admin IP subnet. This field does not apply if the adminIpAddrAssignMethod parameter is set to dynamic. For static addressing, you must use a valid IPv4 subnet for the adminNetmask parameter. adminDHCPSuppliedParamUsage No Enum 0 0 - USE_ALL 1 - USE_IP_ONLY 2 - USE_IP_DNS_ONLY Determines how the SBC uses the parameters that the DHCP server supplies when a logical interface is configured with Dynamic IP addressing. USE_ALL - The SBC uses all supported DHCP parameters. The SBC uses the supplied DNS servers as global DNS servers, which replace the currently configured DNS servers. This configuration does not affect the split-DNS settings. USE_IP_ONLY - The SBC uses only the IP address and netmask. This configuration ignores the DNS server and other settings, and does not affect the current split-DNS settings. USE_IP_DNS_ONLY - The SBC uses only the IP address, domain-name, and DNS server IP addresses. The SBC uses the supplied domain-name and the DNS server IP addresses depending on the value of the ConfigureSplitDNS parameter. NextHopIP1 No String None 15 to maximum length Specifies the Eth1 next hop IP address. pkt1 N/A N/A N/A N/A Defines the second packet network for voice traffic. NOTE: If you add the adminDHCPSuppliedParamUsage parameter on any interface, the interface becomes dynamic. pkt0 Yes N/A N/A configureEth2IF No BOOLEAN_TYPE N/A A container that defines the first packet network for voice traffic. applicationIpAddrAssignMethod No Enum 0 0 - static 1 - dynamic Determines whether the specific node-level settings are configured dynamically (through DHCP) or statically. applicationIPV4Address No String None 15 to maximum length Sets the Ethernet 1 IP address. This field does not apply if the applicationIpAddrAssignMethod parameter is set to dynamic. For static addressing, you must use a valid IPv4 address for the applicationIPV4Address parameter. applicationIPV4Netmask No String None 15 to maximum length Sets the Ethernet 1 IP subnet. This field does not apply if the eth1IpAddrAssignMethod parameter is set to dynamic. For static addressing, you must use a valid IPv4 subnet for the applicationIPV4Netmask parameter. applicationDHCPSuppliedParamUsage No Enum 0 0 - USE_ALL 1 - USE_IP_ONLY 2 - USE_IP_DNS_ONLY Determines how the SBC uses the parameters that the DHCP server supplies when a logical interface is configured with Dynamic IP addressing. USE_ALL - The SBC uses all supported DHCP parameters. The SBC uses the supplied DNS servers as global DNS servers, which replace the currently configured DNS servers. This configuration does not affect the split-DNS settings. USE_IP_ONLY - The SBC uses only the IP address and netmask. This configuration ignores the DNS server and other settings, and does not affect the current split-DNS settings. USE_IP_DNS_ONLY - The SBC uses only the IP address, domain-name, and DNS server IP addresses. The SBC uses the supplied domain-name and the DNS server IP addresses depending on the value of the ConfigureSplitDNS parameter. NextHopIP1 No String None 15 to maximum length Specifies the Eth1 next hop IP address. pkt1 N/A N/A N/A N/A Defines the third packet network for voice traffic. configureEth3IF No Enum 0 0 - static 1 - dynamic Determines whether the specific node-level settings are configured dynamically (through DHCP) or statically. Defines the second packet network for voice traffic. eth2IpAddrAssignMethod No Enum 0 0 - static 1 - dynamic Determines whether the specific node-level settings are configured dynamically (through DHCP) or statically. eth2IPV4Address No String None 15 to maximum length Sets the Ethernet 1 IP address. This field does not apply if the eth2IpAddrAssignMethod parameter is set to dynamic. For static addressing, you must use a valid IPv4 address for the eth2IPV4Address parameter. eth2IPV4Netmask No String None 15 to maximum length Sets the Ethernet 1 IP subnet. This field does not apply if the eth2IpAddrAssignMethod parameter is set to dynamic. For static addressing, you must use a valid IPv4 subnet for the eth2IPV4Netmask parameter. eth2DHCPSuppliedParamUsage No Enum 0 0 - USE_ALL 1 - USE_IP_ONLY 2 - USE_IP_DNS_ONLY Determines how the SBC uses the parameters that the DHCP server supplies when a logical interface is configured with Dynamic IP addressing. USE_ALL - The SBC uses all supported DHCP parameters. The SBC uses the supplied DNS servers as global DNS servers, which replace the currently configured DNS servers. This configuration does not affect the split-DNS settings. USE_IP_ONLY - The SBC uses only the IP address and netmask. This configuration ignores the DNS server and other settings, and does not affect the current split-DNS settings. USE_IP_DNS_ONLY - The SBC uses only the IP address, domain-name, and DNS server IP addresses. The SBC uses the supplied domain-name and the DNS server IP addresses depending on the value of the ConfigureSplitDNS parameter. NextHopIP2 No String None 15 to maximum length Specifies the Eth2 next hop IP address. pkt2 N/A N/A N/A N/A Defines the third packet network for voice traffic. configureEth4IF No N/A 0 N/A Specifies that the fourth packet network is configured. eth3IpAddrAssignMethod No Enum 0 0 - static 1 - dynamic Determines whether the specific node-level settings are configured dynamically (through DHCP) or statically. eth3IPV4Address No String None 15 to maximum length Sets the Ethernet 1 IP address. This field does not apply if the eth3IpAddrAssignMethod parameter is set to dynamic. For static addressing, you must use a valid IPv4 address for the eth3IPV4Address parameter. eth3IPV4Netmask No String None 15 to Sets the Ethernet 1 IP subnet. This field does not apply if the eth4IpAddrAssignMethod parameter is set to dynamic. For static addressing, you must use a valid IPv4 subnet for the eth4IPV4Netmask parameter. eth4DHCPSuppliedParamUsage No Enum 0 0 - USE_ALL 1 - USE_IP_ONLY 2 - USE_IP_DNS_ONLY Determines how the SBC uses the parameters that the DHCP server supplies when a logical interface is configured with Dynamic IP addressing. USE_ALL - The SBC uses all supported DHCP parameters. The SBC uses the supplied DNS servers as global DNS servers, which replace the currently configured DNS servers. This configuration does not affect the split-DNS settings. USE_IP_ONLY - The SBC uses only the IP address and netmask. This configuration ignores the DNS server and other settings, and does not affect the current split-DNS settings. USE_IP_DNS_ONLY - The SBC uses only the IP address, domain-name, and DNS server IP addresses. The SBC uses the supplied domain-name and the DNS server IP addresses depending on the value of the ConfigureSplitDNS parameter. NextHopIP4 No String None 15 to maximum length Specifies the Eth4 next hop IP address. gatewayAddress No String None 15 to maximum length Sets the gateway address for the default static route. This field does not apply if the ifIpAddrAssignMethod parameter is set to dynamic. For static addressing, you must configure this field. You must configure the field within the same subnet, but not the same address, as the applicationIPV4Address parameter. asmDHCPEnabled No BOOLEAN_TYPE None N/A Determines whether DHCP is enabled on the Application Solution Module (ASM). This field does not apply if either the node does not have an ASM or the ifIpAddrAssignMethod parameter is set to dynamic. maximum length Sets the Ethernet 1 IP subnet. This field does not apply if the eth3IpAddrAssignMethod parameter is set to dynamic. For static addressing, you must use a valid IPv4 subnet for the eth3IPV4Netmask parameter. eth3DHCPSuppliedParamUsage No Enum 0 0 - USE_ALL 1 - USE_IP_ONLY 2 - USE_IP_DNS_ONLY Determines how the SBC uses the parameters that the DHCP server supplies when a logical interface is configured with Dynamic IP addressing. USE_ALL - The SBC uses all supported DHCP parameters. The SBC uses the supplied DNS servers as global DNS servers, which replace the currently configured DNS servers. This configuration does not affect the split-DNS settings. USE_IP_ONLY - The SBC uses only the IP address and netmask. This configuration ignores the DNS server and other settings, and does not affect the current split-DNS settings. USE_IP_DNS_ONLY - The SBC uses only the IP address, domain-name, and DNS server IP addresses. The SBC uses the supplied domain-name and the DNS server IP addresses depending on the value of the ConfigureSplitDNS parameter. NextHopIP3 No String None 15 to maximum length Sets the ASM's IPV4 address. This field does not apply if either the node does not have an ASM or asmDHCPEnabled is set to true. timeZoneGeoName No String UTC 128 to maximum length Sets the system's time zone. Specifies the Eth3 next hop IP address. pkt3 N/A N/A netconfig_account No String N/A A container that defines the netconfig configuration. NOTE: Only Release 8.0.3 and later support the netconfig_account configuration. netconfigUserPassword No String None N/A Overrides the default netconfig password and allows you to set the system without a hardcoded password. dns N/A N/A N/A N/A A container that defines the DNS server details. N/A Defines the fourth packet network for voice traffic. eth4IpAddrAssignMethod No Enum 0 0 - static 1 - dynamic Determines whether the specific node-level settings are configured dynamically (through DHCP) or statically. eth4IPV4Address No String None 15 to maximum length Sets the Ethernet 1 IP address. This field does not apply if the eth4IpAddrAssignMethod parameter is set to dynamic. For static addressing, you must use a valid IPv4 address for the eth4IPV4Address parameter. eth4IPV4Netmask No String None 15 to maximum length Sets the Ethernet 1 IP subnet. This field does not apply if the eth4IpAddrAssignMethod parameter is set to dynamic. secondaryDNSServerIP No String None 15 to maximum length Sets the IP address (IPv4 format) of the secondary DNS server. This field does not apply if the ifIpAddrAssignMethod parameter is set to dynamic. Setting this field to empty (with static addressing) disables the secondary DNS server. adminUserName Yes String None 32 to maximum length Specifies an administrative username to use in subsequent logins. adminUserPassword Yes String None 128 to maximum length Specifies an administrative user password to use in subsequent logins. rest_account N/A N/A N/A N/A A container that defines the rest account configuration. restUserName No String None 32 to maximum length Specifies a REST username to use in subsequent authentications. If this parameter and the restUserPassword are either empty or not provided, then the SBC does not set up the node for REST access until you create a REST user from the UI. For static addressing, you must use a valid IPv4 subnet for the eth4IPV4Netmask parameter. eth4DHCPSuppliedParamUsage No Enum 0 0 - USE_ALL 1 - USE_IP_ONLY 2 - USE_IP_DNS_ONLY Determines how the SBC uses the parameters that the DHCP server supplies when a logical interface is configured with Dynamic IP addressing. USE_ALL - The SBC uses all supported DHCP parameters. The SBC uses the supplied DNS servers as global DNS servers, which replace the currently configured DNS servers. This configuration does not affect the split-DNS settings. USE_IP_ONLY - The SBC uses only the IP address and netmask. This configuration ignores the DNS server and other settings, and does not affect the current split-DNS settings. USE_IP_DNS_ONLY - The SBC uses only the IP address, domain-name, and DNS server IP addresses. The SBC uses the supplied domain-name and the DNS server IP addresses depending on the value of the ConfigureSplitDNS parameter. NextHopIP4 No String None 15 to maximum length Specifies the Eth4 next hop IP address restUserPassword No String None 128 to maximum length . syslog N/A N/A N/A N/A A container that defines the syslog server configuration. ServerAddress No String None 128 to maximum length Specifies the IP address or FQDN of the Syslog server where the SBC sends log entries. If this field is empty then the SBC does not add a Syslog server. ServerPort Yes N/A N/A N/A A container that defines the NTP server configuration. Ntp1ServerName No String None 255 to maximum length Configures the hostname, IP, or IPv6 address of the first configured NTP server. If the hostname is supplied, the system uses the DNS to connect to the NTP server. NOTE: The SBC uses this parameter only when the useDynamicNetSettings parameter is set to false. If useDynamicNetSettings is set to true, the first configured NTP server is in the runtime rt_NTPServer1 parameter. IsNtp1AuthEnabled No Enum 0 0 - btFalse 1 - btTrue Enables or disables the authentication of the first NTP server. NOTE: The SBC uses this parameter only when the useDynamicNetSettings parameter is set to false. Ntp1ServerKeyId No Integer 0 0 - Minimum 2147483647 - Maximum Configures the MD5 Key ID to authenticate the first NTP server 0, which is the system default value when the NTP server is not configured. If you configure the NTP server you must use a value higher than 0. NOTE: The SBC uses this parameter only when the useDynamicNetSettings parameter is set to false. Integer 514 514 to minimum 65534 to maximum Specifies the Syslog server port number where the SBC sends log entries. ServerTransport Yes Enum 0 0 - stUDP 1 - stTCP Specifies the protocol that the SBC uses to send log entries to the Syslog server. DefaultLevel No Enum 4 0 - llDefault 1 - llTrace 2 - llDebug 3 - llInfo 4 - llWarn 5 - llError 6 - llFatal 7 - llOff Controls the default minimum severity level of messages sent to this server. You can override this default value on a per-system basis through the Subsystems Configuration. The Informational setting produces the most output and the Fatal setting produces the least output. The more output there is the more the parameter impacts system performance. NOTE: The following are valid values for the DefaultLevel: 3 - Informational 4 - Warning 5 - Error 6 - Fatal ntp No N/A N/A N/A A container that defines the NTP server configuration. Ntp1ServerName No String None 255 to maximum length Configures the hostname, IP, or IPv6 address of the first configured NTP server. If the hostname is supplied, the system uses the DNS to connect to the Ntp1ServerKey No String None 64 to maximum length NTP server. NOTE: The SBC uses this parameter only when the useDynamicNetSettings parameter is set to false. If useDynamicNetSettings is set to true, the first configured NTP server is in the runtime rt_NTPServer1 parameter. IsNtp1AuthEnabled No N/A N/A N/A A container that defines the defaultgateway and route1 configurations. defaultGateway No String None 15 to maximum length Specifies the gateway IP address. This parameter is a member of the staticroute container. route1 No N/A N/A N/A A container that defines the route configurations. This container is a member of the staticroute container. ipDestinationAddr1 No String None 15 to maximum length Specifies the destination IP address. This parameter is a member of the route1 container. Enum 0 0 - btFalse 1 - btTrue Enables or disables the authentication of the first NTP server. NOTE: The SBC uses this parameter only when the useDynamicNetSettings parameter is set to false. Ntp1ServerKeyId No Integer 0 0 - Minimum 2147483647 - Maximum Configures the MD5 Key ID to authenticate the first NTP server 0, which is the system default value when the NTP server is not configured. If you configure the NTP server you must use a value higher than 0. NOTE: The SBC uses this parameter only when the useDynamicNetSettings parameter is set to false. Ntp1ServerKey No String None 64 to maximum length Sets the subnet mask for the ipDestinationAddr1 parameter. This parameter is a member of the route1 container. ipNexthopAddress1 No String None 15 to maximum length Specifies the next hop IP address. This parameter is a member of the route1 container. Configures the MD5 key to authenticate the first NTP server. NOTE: The SBC uses this parameter only when the useDynamicNetSettings parameter is set to false. staticroute No N/A N/A N/A A container that defines the defaultgateway and route1 configurations. defaultGateway No String None 15 to maximum length Specifies the gateway IP address. This parameter is a member of the DefaultLevel No Enum 4 0 - llDefault 1 - llTrace 2 - llDebug 3 - llInfo 4 - llWarn 5 - llError 6 - llFatal 7 - llOff Controls the default minimum severity level of messages sent to this server. You can override this default value on a per-system basis through the Subsystems Configuration. The Informational setting produces the most output and the Fatal setting produces the least output. The more output there is the more the parameter impacts system performance. NOTE: The following are valid values for the DefaultLevel: 3 - Informational 4 - Warning 5 - Error 6 - Fatal SyslogFacility Yes Enum 9 0 - sfUser 1 - sfKern 2 - sfMail 3 - sfDaemon 4 - sfAuth 5 - sfLpr 6 - sfNews 7 - sfUucp 8 - sfCron 9 - sfLocal0 10 - sfLocal1 11 - sfLocal2 12 - sfLocal3 13 - sfLocal4 14 - sfLocal5 15 - sfLocal6 16 - sfLocal7 Controls which Syslog Facility the SBC uses to send log entries. You can use this parameter to facilitate the sorting of messages from different nodes on a central Syslog server. ServerPort Yes Integer 514 514 to minimum 65534 to maximum Specifies the Syslog server port number where the SBC sends log entries. ServerTransport Yes Enum 0 0 - stUDP 1 - stTCP Specifies the protocol that the SBC uses to send log entries to the Syslog server. edgeview No Boolean 0 0 - Disable 1- Enable Enable or disable the configuration. Note: When you enable this parameter, the EdgeviewFQDNName and EdgeviewManagementID parameters are mandatory. EdgeviewFQDNName Yes String None 15 to 255 characters The EdgeView server address (IP address or FQDN). EdgeviewManagementID Yes String None N/A Caution: When you enter the EdgeView Management ID, you must insert a colon every two characters (00:00:00). Otherwise, the  Spacevars 0 product3 cannot connect to the EdgeView. The EdgeView Management ID. For information about retrieving the EdgeView Management ID, refer to Obtaining and Installing an SBC SWe Lite Production License. staticroute container. route1 No N/A N/A N/A A container that defines the route configurations. This container is a member of the staticroute container. ipDestinationAddr1 No String None 15 to maximum length Specifies the destination IP address. This parameter is a member of the route1 container. ipDestinationMask1 No String None 15 to maximum length Sets the subnet mask for the ipDestinationAddr1 parameter. This parameter is a member of the route1 container. ipNexthopAddress1 No String None 15 to maximum length Specifies the next hop IP address. This parameter is a member of the route1 container. ipStaticRouteMetric1 No String None 15 to maximum length Specifies the route cost metric value. This parameter is a member of the route1 container. edgeview No Boolean 0 0 - Disable 1- Enable Enable or disable the configuration. NOTE: When you enable this parameter, the EdgeviewFQDNName and EdgeviewManagementID parameters are mandatory. EdgeviewFQDNName Yes String None 15 to 255 characters The EdgeView server address (IP address or FQDN). EdgeviewManagementID Yes String None N/A CAUTION: When you enter the EdgeView Management ID, you must insert a colon every two characters (00:00:00). Otherwise, the  Spacevars 0 product3 cannot connect to the EdgeView. The EdgeView Management ID. For information about retrieving the EdgeView Management ID, refer to Obtaining and Installing an SBC SWe Lite Production License. MACAddress No String None N/A It is optional to enter the MACAddress information of the interface objects (mgt0, pkt0, pkt1, pkt2, and pkt3). If you provide this information, the cloud-init function performs the interface mapping based on the supplied MAC addresses. If you do not provide this information, the interface mapping is performed using the default PCI order. NOTE: You must include the MACAddress information to perform interface mapping.

   
   

3. Enter the following command to save the ISO file.

   Code Block
   mkisofs -R -V config-2 -o vendorconfig.iso config_drive

   
   

4. After you create the ISO file, you must mount the file.

Anchor
mount mount

Mounting a Config-drive Image

You must mount the ISO file created in the Creating a Config-drive Image procedure.

To Mount a Config-drive Image

Use the following procedure to mount a config-drive image.

1. Modify the XML definition of the VM to attach the ISO file as a read only drive

   Enter the following command to save the ISO file.

   Code Block
   mkisofs -R -V config-2 -o vendorconfig.iso /config_drive

   After you create the ISO file, enter the following commands to attach it to either the KVM Hypervisor, VMware, or Hyper-V.

   Info
   title Note
   Alter the vendorconfig.iso filename so it identifies the vendor and VNF name.

   
   

   Code Block
   <disk type="file" device="cdrom"> <driver name="qemu" type="raw" cache="none" /> <source file="/var/third-party/vendorname/vendorconfig.iso" /> <readonly /> <target dev="vdc" /> </disk>

   
   

2. Boot the

   Spacevars
   0 product3

   . The 

   Spacevars
   0 product3

   performs auto configuration, and then opens the main WebUI.

...