| Include Page |
|---|
| _LBS Unsupported Note |
|---|
| _LBS Unsupported Note |
|---|
|
The
supports configuring a Load Balancing Service (LBS) to distribute
INVITE and REGISTER details between SBC platforms or Dmedia requests among M-SBC instances
, as applicable. To disable Load Balancing for a particular zone, refer to Zone - Retarget Support - CLI.in a cluster. | Info |
|---|
|
To configure a an LBS on a PKT port (any IP Interface other than MGMT), execute the command "set system clusterAdmin clusterComm type ip" before configuring the LBS configuration on M-SBC. Refer to Cluster Admin - CLI for configuration details. |
Use the 'show table/system loadBalancingService...' command to view Load Balancing Service status Refer to Show Table System for details.
| Include Page |
|---|
| Configure_ClusterAdmin_first |
|---|
| Configure_ClusterAdmin_first |
|---|
|
Refer to Cluster Admin - CLI for configuration details.
Command Syntax
SBC Core Syntax (except M-SBC)
The following Load Balancing Service CLI syntax applies to the following platforms:
- SBC 5xx0, 7000, SWe
- S-SBC (in a SWe Cloud D-SBC configuration)
| Code Block |
|---|
% set system loadBalancingService
groupName <group_name>
inviteRetargetMode <disable | redirect>
registerRetargetMode <disable | redirect>SBC M-SBC Syntax
The following Load Balancing Service CLI applies only to M-SBC (in a SWe Cloud D-SBC configurationdistributed SBC SWe deployment).
| Code Block |
|---|
% set system loadBalancingService
groupName <group_name>
privateIpInterfaceGroupName <name> |
Command Parameters
SBC Core Parameters (except M-SBC)
The following Load Balancing Service parameters apply to the following platforms:
- SBC 5xx0, 7000, SWe
- S-SBC (in a SWe Cloud D-SBC configuration)
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Load Balancing Service Parameters |
|---|
3 | Load Balancing Service Parameters
| Parameter | Description |
|---|
groupName | <name> – Domain name of the load balancing group. (1-63 characters) |
inviteRetargetMode
| Specifies the load balancing service mode for INVITEs. Use this parameter to enable load balancing for initial INVITE requests. If set to redirect, calls are retargeted, as necessary, to balance the load using SIP 302 "Moved Temporarily" response code. disabled (default)redirect
|
registerRetargetMode
| Specifies the load balancing service mode for REGISTERs. Use this parameter to enable load balancing for REGISTER requests.
If set to redirect, new registrations are retargeted, as necessary, to balance the load using SIP 302 "Moved Temporarily" response code.disabled (default)redirect
SBC M-SBC Parameters
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Load Balancing Service Parameters (M-SBC) |
|---|
| 3 | Load Balancing Service Parameters (M-SBC) |
|---|
|
| Parameter | Description |
|---|
groupName | <name> – Domain name of the load balancing group. (1-63 characters) | privateIpInterfaceGroupName | <name> – Use this parameter to specify the name of the private IP Interface Group the M-SBC/T-SBC uses to communicate to the Media Resource Function (MRF) for this load balancing group. |
|
Command Examples
To configure the load balancing service on SM-SBC:
| Code Block |
|---|
set system loadBalancingService groupName lbg1.xyz.com inviteRetargetMode redirect registerRetargetMode redirectprivateIpInterfaceGroupName LIF1
commit |
To configure the load balancing service on M-SBC:
SBC Core Syntax (except M-SBC)
This configuration applies to a feature that is no longer supported and the configuration is no longer required.
| Code Block |
|---|
% |
| Code Block |
|---|
set system loadBalancingService groupName lbg1.xyz.com privateIpInterfaceGroupName LIF1
commit
groupName <group_name>
inviteRetargetMode <disable | redirect>
registerRetargetMode <disable | redirect> |