| Parameter | Description |
|---|
addPrefix1ForInterLataCalls | When enabled, allows the addition of the prefix "1" for Inter LATA calls. |
addPrefix1ForIntraLataCalls | When enabled, prefix "1" is added to Intra LATA calls. |
addPrefix011ForInternationalCalls | When enabled, prefix 011 is added to international calls. |
annexESupport | Annex E is supported. |
applySwitchTypeCpcProfile | Use this flag to enable the CPC/OLI Parameter Mapping feature on the associated trunk group(s). |
callBackWhenFreeSupport | Use this flag to enable the Call Back When Free (CBWF) feature on the associated trunk group(s). See Call Back When Free Support for feature details. |
calledNumber7Digits | Enable flag to send the 7-digit called number as part of the outgoing signaling protocol. |
callingNumber7Digits | Enable flag to send the 7-digit calling number as part of the outgoing signaling protocol. |
changeBearerCapFrom3_1KHzToSpeech | Enable flag to reset bearer capability of 3.1 kHz received from the ingress to speech for this outgoing trunk group. |
convertNumbersToE164Format | Enable flag to convert numbers to E.164 format outgoing trunk group. |
cpcMapping | Use this flag to enable the CPC mapping on the associated trunk group(s). |
dialedNumberAsCalledNumber | When enabled, the PSX populates the called number (associated with a returned route) with the dialed number. |
disableChargingAuthorityForChosenCarrier | When enabled, the SBC does not delete the ISUP parameters from the ACM and CPG messages, and it allows the CHG message to transit when it is acting as the chosen carrier. |
discardCallingAndContractNumbers | When enabled, the SBC will not include calling and contractor numbers in egress signaling when calling number NOA is Network Specific and the first digit of the calling number is not 0, or the calling number screening is set to User Provided, Verified, and Failed. |
discardGAPAddlClgIfSameAsClgNumberAndIngressSIP | When enabled, for SIP-to-ISUP calls the SBC does not include the GAP additional calling number in the egress signaling if it is the same as the original calling number. |
discardTnsAndTrunkgroupOwningCarrierMatch | When enabled, it causes the TNS parameter to be discarded when it matches the Owning Carrier assigned to the egress trunk group. |
dontStripClgNumberForRestrictedPresentation | When enabled, the PSX does not strip (delete) the digits of the calling number for restricted presentation. |
forcedOverrideOlipValue | When enabled, and there is a value other than none in the Forced OLIP Value field in the ingress section of the trunk group to which this signaling profile is applied, the value in that field is copied to the OLI parameter on the egress trunk and sent in the PSX policy response. |
generateFeParam | When enabled, controls the generation of the FE parameter. |
oliMapping | When enabled, it enables the OLI parameter mapping on the associated trunk group(s). |
overwriteChargeInformationIfChosenIXC | When enabled, the SBC will modify the parameters related to charge indication if the value of the Carrier type parameter determined by the PSX is Chosen IXC. |
performCalledPartyMemberCheck | When enabled, the PSX checks the called party member status in the subscriber table for the JTI prefix. |
propagateChargeMessage | When enabled, the PSX propagates the CRG messages received on the associated egress trunk group from succeeding exchanges to the originating exchange for billing purposes. |
propagateGdParam | When enabled, SBC controls the propagation of the Generic Digits parameter (switch ID/trunk group ID) in the forward direction in the egress IAM. |
propagateIngressChannelInfo | When enabled, propagate ingress PSTN channel information in the INVITE header sent by a SBC to this SIP Server (via the "chan" parameter in the From: field). |
reorderTrunkBasedOnIsupPreference | When enabled, the PSX orders route lists appropriately for calls over ISUP trunks that terminate to a protocol converter for R2 signaling. |
replacePrefix0WithPlus81ForTranslationSourceNumber | When enabled, and when the translation source number has prefix 0, PSX replaces the prefix 0 with +81. |
rerouteOnSignalingCongestion | When enabled, calls on the associated trunk group are rerouted to an alternate route. |
resetOlipForTollFreeCalls | When enabled, the SBC resets the OLIP for toll free calls to the pay phone code. |
restoreCallingNumberIfDerivedFromBillingNumber | When enabled, the calling number that came in the policy request is sent in the policy response. |
restoreCallingNumberIfDerivedFromRedirectingNumber | When enabled, and if the PSX derives the calling number from the redirecting number during call processing, the PSX restores the original calling number before sending it in the policy response. |
restoreCallingNumberIfDerivedFromTrunkGrp | When enabled, and if the PSX derives the calling number from the default calling number associated with the ingress trunk group during call processing, the original calling number is restored before the call is sent out on the egress trunk group. |
| | |
restoreFciInternationalBit | When enabled, the PSX copies the incoming FCI A-bit to the outgoing FCI A-bit. |
sendBillingNumberAsClgNumber | When enabled, the PSX populates the contents of the billing number over to the calling party parameter. |
sendBillingNumberAsClgNumberIfClgNumberNotPresent | When enabled, and if the calling number does not exist or the calling number presentation is set to Restricted, the PSX populates the calling number field in the policy response with the billing number. |
sendCallingNumberWhenNotDerivedFromInput | When enabled, and if the calling number does not exist or the calling number presentation is set to Restricted, the PSX populates the calling number field in the policy response with the billing number. |
sendContractNumberIfAllowedByIngressSip | When enabled, and and the ingress signaling is SIP, the contractor number, if it exists, will be sent in the egress signaling. |
sendTollFreeNumberInGapParam | When enabled, the toll free number will be sent in the Generic Address Parameter (GAP). |
sendTollFreeNumberInOcnParam | When enabled, the toll free number will be sent in the Original Called Number (OCN) parameter.
|
stripRepAreaCodeDigits | When enabled, RAC digits are removed from the called party number.
|
transitAllRedirectionNumberNOA | When enabled, the PSX informs the SBC to forward the R-REL transparently to the previous switch regardless of the Nature Of Addresss. The options are: |
undoLnp | When enabled, the SBC undoes LNP on the associated trunk group(s).
|
useOutputANIForCDNIS | When enabled, the Automatic Number Identification (ANI) to be included in the egress signaling is used for the ANI provisioned in the Custom DNIS DM rule on the associated egress trunk group. |