Versions Compared

Old Version 3

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version Current

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Add_workflow_for_techpubs
AUTH1UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26c9b90306, userName='null'}
JIRAIDAUTHSBX-75383
REV5UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb8305e9, userName='null'}
REV6UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb8305e9, userName='null'}
REV3UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ccb7089b, userName='null'}
REV1UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ccb7089b, userName='null'}


Panel

In this section:

Table of Contents
maxLevel2

This object allows you Use the GW Sig Port window to configure a signaling ports port for gateway-to-gateway (GW to GW) call signaling. The gateway-to-gateway signaling is a protocol that transports call signaling messages between SBC (and GSX) instances over a TCP connection and requires that an external PSX is part of the network. The SBC supports gateway-to-gateway signaling .

...

GW signaling port limitations:

on all platforms, including virtualized SBC SWe deployments.

The parameters to define the GW signaling port differ based on your type of the SBC platform. For cloud-based deployments of SBC SWe (I-SBC or D-SBC), the parameters include IP Var so that the IP address for the port can be specified using a metavariable rather than a static IP address. For other SBC platforms,  use the IP Address V4 or V6 parameter to enter a specific IP address.

The SBC supports a single GW signaling port at a time. The GW signaling port must be defined within

...

the default address context and

...

the

...

defaultSigZone zone, and it must be assigned an index value of 1.


Include Page
Unique_IP_for_SigPort
Unique_IP_for_SigPort

Include Page
IP_IGs_ServedBySeperateProcessors
IP_IGs_ServedBySeperateProcessors

...

View

...

GW Sig Port

On the SBC main screen, go to Configuration > System Provisioning > Category: Base Provisioning > Signaling Ports > Gw GW Sig Port.

The Gw GW Sig Port window is displayed. The following figure shows the window for an I-SBC or D-SBC (cloud) deployment that includes the IP Var parameter.

Caption
0Figure
1Signaling Ports - Gw Sig Port with IP Var

Image Modified

The Gw Sig Port can be checked for each Address Context or for each Zone or for all the Address Contexts and Zones created. Use the drop-down box to select the desired Address Context and ZoneThe following figure shows the window for non-cloud deployment that includes the IP Address V4 or V6 parameter.

Caption
0Figure
1Gw Sig Port Main Field

Image Removed

To Edit Gw Sig Port

To edit any of the Gw Sig Ports in the list, click the radio button next to the specific Gw Sig Port name.

Caption
0Figure
1Gw Sig Port Highlighted

Image Removed

The Edit Selected Gw Sig Port window is displayed below.

Caption
0Figure
1Gw Sig Port Edit Window

Image Removed

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

Signaling Ports - Gw Sig Port with IP Address

Image Added

Create the GW

...

Sig Port

To create a new Gw GW Sig Port, click New Gw sig Port tab on the Gw

  1. Select default from the Address Context drop-down and  defaultSigZone from the Zone drop-down.
  2. Click the New GW Sig Port on the GW Sig Port List panel.

...

...

Image Removed

The Create New Gw Sig Port Port window is displayed. The following example shows the parameters for an I-SBC or D-SBC deployment.

Caption
0Figure
1Gw Sig Port Create Window

Image Modified


The following fields are displayed:

Caption
0Table
1Gw Sig Port Parameters


Parameter

Description

Index

Specify

Set the index for gateway signaling port to 1.

Ip Interface Group Name

The

Specify the name of the IP interface group used by this

Signaling Port

signaling port.

Ip Address

Specifies

Specify the IP

Address of the Gateway Signal Listen Port. This is V4 and V6 IP
address in dotted decimal form (for example 128.127.50.224). Default is 0.0.0.0.

address for the gateway signaling listening port in IPV4 or IPV6 format.

This is a required parameter visible on hardware systems and SBC SWe systems that do not use metavariables.

Note: For cloud-based I-SBC, D-SBC SBC SWe deployments, this parameter is not visible.

Port Number

The logical port number of the TCP port to use for this connection. Must be 1-65535, default is 2569.

Role

The main role of the signaling port:
• primary(default)—the port that makes gateway signal link connection requests to other

Spacevars
0product
, using its IP address as the local address for listening.
• secondary—an alternate port that is used for listening only and cannot be used to establish new gateway signal links.

When no primary port exists, connection requests to other 
Spacevars
0product
cannot be issued and calls which require them are disconnected.
When a secondary port is configured to be primary, the previous primary is automatically made secondary.

Mode

The operational state of the Gateway signaling service:
• inService(default)—the signaling port listens for incoming gateway signal link connection requests.
• outofService—the signal port is not available for incoming gateway signal link connection requests and thus cannot be used to create a new gateway signal links to other

Spacevars
0product
.

State

The administrative state of this gateway signaling port:
• disabled—Not active
• enabled—Active

...

IP Var

Specify the metavariable to use to assign an IP address to the gateway signaling port in an I-SBC or D-SBC deployment. .

Note: This parameter is visible for only I-SBC and D-SBC deployments in the SBC SWe.


Edit the GW Sig Port

To delete edit any of the created Gw Sig PortPorts in the list, click the radio button next to the specific Gw specific Gw Sig Port which name.

  1. Click the radio button next to the name of the entry you want to

...

Caption
0Figure
1Gw Sig Port Highlighted

Image Removed

  1. edit. The Edit  Gw Sig Port window opens.

  2. Change the variable value and click Save.

Delete the GW Sig Port

To delete a GW Sig Port,

  1. Click the radio button next to the name of the entry you want to delete.
  2. Click the delete icon (X) at

...

  1. the end of the

...

  1. row.

...

Caption
0Figure
1Gw Sig Port Delete Confirmation

Image Removed

  2. Confirm the deletion when prompted

...

  1. .