Page History

HTTPS Support

The EMA GUI is available via TLS-secured (https) access either directly through port 443 or indirectly through port 80 to 443. ACL rules are not applicable to prevent unsecured (http) access.

A sample X.509 certificate, which is a copy of the BMC and the EMA Platform Mode certificate, is shipped along with the 

Spacevars
0 product

shipment. The size of this certificate is 2,000 bytes.

Infonote
title Note
The BMC is not applicable to Spacevars 0 product2 .

The EMA uses the common Local Cert store of the 

Spacevars
0 series4

(used also for SIP/TLS) rather than having its own separate certificate store. The operator may replace that sample certificate at any time. The replacement mechanism is implemented with post installation/upgrade scripts.

Certificates with RSA keys up to 4,096 bits are supported.

note

Sonus recommends using only 2,048 bit certificates with release 3.1. 

Spacevars
0 company

 discourages the use of 4,096 bit certificates in 3.1 due to anticipated upgrade issues with the current software.

Enter the following URL in the browser to access the

Spacevars
0 product

EMA:

https://<hostname>

where, the where <host name> is one of the management IP addresses of the

Spacevars
0 product

, or the equivalent DNS name. For example, https://10.54.41.198.17

The EMA uses a self-signed certificate which may produce a warning message by from Internet Explorer and Firefox. These messages may be ignored.

note

Info
title
Note
The Spacevars 0 series4 is delivered with sample self-signed X.509 certificates. Please be Be aware that even though these sample certificates will allow you to use HTTPS to access the Spacevars 0 product from EMA, BMC and EMA Platform Mode interfaces, using this protocol with the sample certificates is not a truly secure access method. If your organization requires a more secure access, refer to Generating PKI Certificates.

note

Info
title
Note
The Spacevars 0 series4 supports SHA-256 for certificate verification.

Logging In

Supported Browsers and Client Computers

Refer to See 

Link_in_new_tab
Text Supported Browsers and Client Computer Requirements URL Introduction to EMA

for a listing list of supported browsers and client platforms when for accessing EMA.

Procedure

Following are the steps to To log into the Embedded Management Application (EMA):

1. Launch your web browser.

2. Enter the

   Spacevars
   0 product

   EMA URL <ip address/device
   name>

   name> 

   Info

    note

   title

   Note

   Sometimes, when When using Internet Explorer/Mozilla Firefox browser, a website security issue may prevent you from going directly to the  the SBC application login screen, as shown in example below.

   Caption
   0 Figure 1 Certificate Security Error
   Image Modified

3. Click

   Continue to this Website (not recommended) option to access the 

   Spacevars
   0 product

   application login screen.

   Advanced.

   Caption
   0 Figure 1 Firefox Message - Self-Certified Website
   Image Added

4. Click Add Exception. 

   Caption
   0 Figure 1 Firefox Message - Add Security Exception
   Image Added

5. Uncheck the Permanently store this exception check-box and click Confirm Security Exception. 

    

   The Login window appears as shown below

   :

   . 

   Caption
   0 Figure 1 Login
   Image Modified

6. Enter your Username

   and

    and Password. Your

   Username

   username and

   the Password

   password will be supplied along with

   the

   the 

   Spacevars
   0 product

   installation

    installation package. Once you have successfully logged

   in to

   into the SBC,

   you

   your temporary password expires and you are prompted to change your password.

   note

Info
title Note
This change password screen appears only for the first

log on

login of the new user.

Caption
0 Figure 1 Change Password
Image Modified

Ensure your new password meets the following criteria

are met to successfully change the password

:

• • Minimum length of characters is 8.
  • Minimum number of upper case characters is 1.
  • Minimum number of lower case characters is 1.
  • Minimum number of numeric digits is 1.
  • Minimum number of special characters is 1.
  • Maximum number of consecutive repeating characters is 3.
  • Minimum number of differences compared to the old password is 4.
  • Do not repeat any of the last 4 passwords.

7. Once

the

your password is successfully changed, enter

the Username

your username and

the new Password and

new password on the Login screen and click Log In.

Information in the Login Window

The Login window displays the following:

• Username
• Password

The following table describes the login window components.

Caption
0 Table 1 Login Window Components
Attributes Description Username Name of the user logging into the application. Password Password associated with the user who is logging in.

Info
title Note
Note
The Username and Password is You can also change the password in EMA without logging in to the application. The option to change password is available on the SBC Application login screen.
Note
Your username and password are same as that for the CLI.

Last Login

Display Date

Information 

 When The last login date of the user is displayed during the login time. When a user logs into either the CLI /or EMA, his/her information on the last successful and failed login date and the IP address attempts is displayed. The user evaluates this information to check illegal activities in the account.The information which are displayed at logininformation shown includes:

1. Last successful login date and time.
2. Last successful login IP address.
3. Last unsuccessful login date and time.
4. Last unsuccessful login IP address.

5. Number of failed attempts after successful login.

    

Info

note

title Note

The

Items 3, 4 and 5

will be displayed

display only when the last successful login date is older than the last unsuccessful login date.

See the figure Login Message - Previous Unsuccessful Attempts.

note

Info
title Note
The Last Login Information is also displayed displays for a new user for the first login, as the . The new user is first authenticated and then allowed to change the system-generated password.

Configuring a Banner in the Login Screen

1. On the main screen, navigate to Admin > Application Management. Click Banner chiclet on the left hand side of the page to display the Configure Login Banner window.
2. Enable Show Login Banner option. You can request the user to acknowledge the Banner by enabling the Require User to Acknowledge Banner before Logging in option and also, you can request the user to acknowledge every time they login or only during the first login.
3. Add your banner text in the text box next to Banner Text option to display your Banner content.
4. Click Save to save your edits.

Logging Out of EMA

To log out of EMA:

Hover the mouse pointer over <your_username> on the menu bar. and click Log Out.

Caption
0 Figure 1 Log Out
Image Added

Security Enhancement to Allow Only One Concurrent EMA Session

Info
This security enhancement is available beginning with SBC Core version 06.02.00R000.

This enhancement enables the EMA application (including EMA in platform mode) to disable concurrent user sessions. Once a new session is established, any existing session is terminated immediately. When an EMA user attempts to log in, the system checks for any open sessions with the same username. If any existing user session is identified, that user is immediately logged out from the application and allows the new user to log in to the system.

Info
title Note
This feature is applicable to all EMA users (local users, radius users, PKI certificate-based users, and CAC users).

Pagebreak