...
...
...
...
Back to Table of Contents
Back to CLI System-Level Mode
Back to request Command Details
Back to Request Address Context - CLI
...
The request addressContext zone
command is available from both system-level and configure modes. This command allows you to perform system-level commands against a particular zone, such as recovering blacklisted endpoints and resetting statistics counts on all signaling ports.
Command Syntax
Code Block |
---|
|
> request addressContext <addressContext name> zone <zone name>
cacNonRegEndPointRemoveEntry sourceIpAddress <IP address>
filterSipSrc fqdnEntry <IP address>
ipPeer <peer name> pathCheck localAdminState state <block | unblock> remoteAdminState state <block | unblock>
mtrmConnPort <reset | statReset>
sipArsEndpointRecoveryAll
sipArsEndpointRecoveryByIp ipAddress <ip address> port <port#>
sipSigConnResetAll
sipSigPortResetAll
sipTrunkGroup <TG name> packetOutage clear |
Command Parameters
Caption |
---|
0 | Table |
---|
1 | request addressContext zone Parameters |
---|
|
...
...
filterSipSrc
...
cacNonRegEndPointRemoveEntry | sourceIpAddress <IP address> – Use this command to
|
|
...
remove any CAC entries associated with the specified source IP address. | filterSipSrc
| Use this object to define information related to filtering a SIP message against the source IP address. | ipPeer
| <peer name> pathCheck
|
|
...
– Use this parameter to manually block or unblock the Local Admin state or Remote Admin state of the peer in the specified zone. localAdminState state <block | unblock> remoteAdminState state <block | unblock>
| mtrmConnPort | Use this object to reset Master Trunk Resource Manager (MTRM) connection port and/or MTRM port statistics. reset – Resets the Master Trunk Group Connection Port and resets all stats related to the connection port.statReset – Resets the Master Trunk Group Connection Port statistics.
|
|
...
NOTE: The reset command has no impact if executed on a disabled or out-of-service object. | sipArsEndpointRecoveryAll
| Recovers all blacklisted endpoints in this zone. |
|
...
NOTE: This command only applies for peers blacklisted using ARS mechanism (not via PATHCHECK). | sipArsEndpointRecoveryByIp | Recovers a blacklisted endpoints in this zone by IP address and port. ipAddress <ip adddress> – Endpoint's IP address.port <endpoint port#> – Endpoint's port number.
|
|
...
NOTE: This command only applies for peers blacklisted using ARS mechanism (not via PATHCHECK). | sipSigConnResetAll | Resets all the statistics counts to zero on all SIP signaling port connections. | sipSigPortResetAll | Resets all the statistics counts to zero on all SIP signaling ports. | sipTrunkGroup | <TG_NAME> -- Specify the SIP trunk group for which to clear packet outage counts. Options include:
cmds queryPsxOnNextRefreshRegister – Use this command in Ingress trunk group (only) to force the SBC to do a PSX dip for the next refresh REGISTER sent to the core. This command is applied to all refresh REGISTERs on all active registrations currently handled by the SBC.
newRegistrarIndex – Specify the route index to route to if more than one route is configured.(Default = 0)overRideInternalExpires – Enable flag to override SBX internal expires timer.registrarFqdn – Refresh REGISTERs on active registrations only towards this FQDN are sent for PSX query.registrarIpAddress – Refresh REGISTERs on active registrations only towards this Registrar IP are sent for PSX query.
packetOutage clear services natTraversal adaptiveLearning clearStats
|
|
...
queryPsxOnNextRefreshRegister conditions:
- This feature requires Pathcheck support using OPTIONS Ping and ARS static blacklisting to detect the reachability of a particular IP/FQDN.
- If both request command and IPSP flags are configured, the request command takes precedence over IPSP flags.
- The parameters
registerFqdn and registerIpAddress are mutually exclusive. Use one or the other in the command, but not both.
|
|
Example
...
To clear Packet Outage Detection state for a SIP trunk group:
...
request addressContext default zone INTERNAL_ZONE sipTrunkGroup TG-1 packetOutage clear
reason Trunk Group Packet Outage Detection State is cleared |
...