Page History

This section provides information on installing software

on to the following

Session Border Controller platforms: SBC 5100™, SBC 5110™, SBC 5200™, SBC 5210™, SBC 5400™ and SBC

7000™.

Pre-Installed Software for the Jumpstart System

The 

platforms are pre-installed with the latest version of the following platform software components:

• Operating System
• BMC Firmware—The Baseboard Management Controller (BMC) is a specialized micro-controller embedded in the

  Spacevars
  0

• series6

  platforms.
• BIOS Firmware—The Basic Input/Output System.

The 

from the Ribbon Support Portal. Download the application software package to your local computer or server

to install the application

. Refer to Downloading

Software from

the Ribbon Support Portal.

For detailed information on installing the new application software,

refer to Installing SBC Application.

Standalone vs. High Availability

The 

• Standalone—A single SBC server.
• High Availability (HA) / Redundant pair—A redundant SBC pair with one system protecting the other system in case of system failure. The HA configuration consists of two 

  Spacevars
  0 product

  servers configured for box-level redundancy.

SBC Operating Modes

When you initially configure

Only Embedded Routing Engine (ERE) mode is supported for all SBC products from the 6.0.0 release. Refer to Routing and Policy Management

to know more about the supported modes from the 6.0.0 release.

Embedded Routing Engine (ERE)– which is a light version of the PSX Policy Server for small to medium size networks with no complex routing. Select this mode if you are using an external PSX.

Return Merchandise Authorization (RMA) SBC

An ISO (re-imaging) should be performed on every SBC received through the RMA process. Perform ISO with the appropriate OS and application files. To know more about re-installing the OS, refer to:

• Re-Installing ConnexIP Operating System for SBC 5000 Series
• Re-Installing ConnexIP Operating System for SBC 7000 Series