This section describes the steps necessary to configure the features required for a SIP endpoint to register with the
using
Local/Pass-through Authorization Tables:
Sonus SBC SBC ConfigurationAdd an Entry to the Local Registrar Table
To add a Local Registrar Table entry:
- In the WebUI, click the Settings tab.
- In the left navigation pane, go to SIP > Local Registrars
- Click the Create SIP Local Registrar () icon.
- Enter a name for the table entry.
Click OK.
Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | Add Local Registrar Table Entry |
---|
| Image Removed |
|
Add a Local/Pass-through Authorization Table
To add a Local/Pass-through Auth Table:
- In the WebUI, click the Settings tab.
- In the left navigation pane, go to SIP > Local/Passthru Auth Tables.
- Click the Create Local/Pass-through Authorization Table () icon.
- Enter a name for the table entry (i.e: Authorization Table).
Click OK.
Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | Add Local/Pass-through Authorization Table
Image Removed |
Add an Entry to the Local/Pass-through Authorization Table
To add an entry to the table:
- In the WebUI, click the Settings tab.
- In the left navigation pane, go to SIP > Local/Pass-thru Auth Tables.
- Click the Authorization Table entry.
- Click the Create Local/Pass-through Authorization Entry () icon.
- Complete the Authorization Parameters fields as shown below.
Click OK.
Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | Add Entry to Local/Pass-through Authorization Table |
---|
| Image Removed |
|
Add
Add a Call Routing Table
To add a Call Routing Table:
- In the WebUI, click the Settings tab.
- In the left navigation pane, go to Call Routing Table.
- Click the Create () icon.
- Enter a desired name in the Description field.
Click OK.
Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | Add Call Routing Table
Image Removed |
To add and configure a Signaling Group:
- In the WebUI, click the Settings tab.
- In the left navigation pane, go to Signaling Groups.
- Click Create Signaling Group and select SIP Signaling Group.
Configure the Signaling Group as shown below.
Panel |
---|
|
caption
0 | Figure |
---|
1 | Add and Configure SIP Signaling Group |
---|
|
Image Removed |
Endpoint Registration
Endpoint Configuration
To configure the endpoint:
- Configure the endpoint with the user's credentials and the IP address.
Click OK to register the endpoint with the
as shown below.: Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | Configure Endpoint |
---|
| Image Modified |
|
Registration Verification
When the endpoint registers, the registration request comes to the node through the SIP Signaling Group and the
responds to the REGISTRATION request with a 200 OK message.
Using the Log Exchange utility, you can easily verify the relevant SIP messaging for a successful SIP endpoint registration:
Register Message |
---|
Image Modified |
200 OK Message |
---|
Image Modified |
Upon successful registration, the
Registrar Table also displays the endpoint as a
Registered User as shown below: Panel |
---|
|
Caption |
---|
0 | Figure |
---|
1 | Endpoint Displayed as Registered User |
---|
| Image Removed |
|
pagebreak. Refer to Creating and Modifying SIP Local Registrars.