to For the Sonus SBC 1000/2000 to function as a DHCP server, it must be enabled and have a DHCP pool configured on the at least one of its interfaces. The Sonus SBC 1000/2000 will only perform
Spacevars
0
longproduct
only performs DHCP server functionality on those interfaces that have a DHCP pool associated with them.
The Sonus SBC 1000/2000 DHCP
Spacevars
0
longproduct
DHCP Server supports serving up to a maximum of 20 address pools. A DHCP pool typically consists of a name, an IP address range, netmask, default router, and other various network parameters, allowing the Sonus SBC 1000/2000 to
Spacevars
0
longproduct
to serve as a DHCP server to multiple connected subnets. It also allows the Sonus SBC 1000/2000 to
Spacevars
0
longproduct
to provide different DHCP parameters to different pools of clients (e.g. SIP phones, engineering workstations, VPN users, etc.).
...
...
The SBC supports IPv4 addresses for this feature; IPv6 is not supported.
To create or to modify an existing DHCP Pool:
...
Panel
borderStyle
none
Caption
0
Figure
1
DHCP Pools
Image Modified
Modifying a DHCP Pool
...
Include Page
_Disable_Entry
_Disable_Entry
nopanel
true
Creating a DHCP Pool
From the DHCP Pools window, click on the ( Image Modified) at the top of the screen.
Panel
borderStyle
none
Caption
0
Figure
1
Create DHCP Pool Entry
Image Modified
...
Pool Attributes - Field Definitions
...
Vendor Options allows the Sonus SBC 1000/2000 to
Spacevars
0
longproduct
to provide vendor parameters for different pools of clients (i.e, SIP phones, engineering workstations, VPN users, etc.). The configuration values are specific to the phone or device being configured. For valid values, consult the manual that accompanied the phone/device.
Below is an example configuration for a Polycom (CX500) phone. Follow the initial instructions for Creating and Modifying DHCP Pools and configure as shown below.
These fields must be configured before the Vendor specific configuration below.
Panel
borderStyle
0
none
Caption
Figure
1
Pool Attribute Configuration
Image Removed
Vendor Specific Configuration
Panel
borderStyle
INLINE
captionnone
0
1
Figure
Vendor Specific InformationINLINE
Image Removed
Vendor Specific Information - Field Definitions
...
Panel
bgColor
#FAFAFA
borderStyle
none
Specifies the Vendor-Identifying Vendor Option data to be sent. A valid entry can be either an ascii string of the attribute or a hex string in the aa:bb:cc format. Maximum length: 64 characters.
