Page History

Note

Upgrades of the Sonus SBC 1000/2000
Spacevars
0 product
(SBC) boot partition are infrequent and - in general end- end users should not need to perform this procedure.
If you are unsure whether or not your Sonus SBC 1000/2000 requires a boot code upgrade, see the upgrade notes for your version of the Sonus SBC 1000/2000 software.

Warning
Changing the Sonus SBC 1000/2000 Boot Image disrupts call services on the Sonus SBC 1000/2000, when the restart required to make the upgrade effective is performed, and should only be completed during a scheduled service outage.

...

In the WebUI, click the Settings tab.
In the left navigation pane, go to System > Software Management > Boot Partition.
Note
icon false
title Important Note:
Remember that you are upgrading the Boot partition and not the Application partition.
Panel
borderStyle none
Caption
0 Figure
1 Boot Partition
Image Modified
Click the Upload Boot Imagelink located on the top right hand side of the pane.
Panel
borderStyle none
Caption
0 Figure
1 Upload Boot Image
Image Modified
Under Select File, click the Browse button and select the Sonus SBC 1000/2000 Boot image to which you wish to upgrade.
Click OK.
Throughout the upload process, the web interface will dispatch a series of status messages: click image thumbnails to see them in full resolution
Section
Column
Panel
borderStyle none
Align
align center
(1) Upgrading the Boot Image
(approx. 2 mins)
Column
Panel
borderStyle none
Align
align center
(2) Boot Image
Successfully Upgraded
Once the upgrade has completed, click Close.
On the Boot Partition page, verify that the Last Upload Status is listed as Success
Panel
borderStyle none
Caption
0 Figure
1 Verify Last Upload Status
Image RemovedImage Added

After the Boot Image is successfully upgraded, you must reboot the Sonus SBC 1000/2000 for the changes to take effect.

Pagebreak

Space shortcuts