Page History

Tone tables allow the Sonus SBC 1000/2000 Administrator

Spacevars
0 product

 administrator to customize the tones a user hears when placing a call. You can modify the tone to match your local PSTN or PBX. The default tone table is configured for the values used in the United States for the following categories: Ringback, Dial, Busy, Congestion, Call Waiting, Disconnect, and Confirmation.

Info
A maximum of eight Tone Tables is permitted in the system.

Note
For Spacevars 0 series3 Only: Do not configure a ringback or congestion tone with frequencies greater than 1KHz when also setting for "continuous" (as opposed to Cadence).

To create or modify an Entry to a Tone Table:

1. In the WebUI, click the Settings tab.

2. In the left navigation pane, click Tone Tables > Default Tone Table.

   Caption
   0 Figure 1 Default Tone Table (SBC 1000 / 2000)
   Image Modified

   Caption
   0 Figure 1 Default Tone Table (SBC SWSe Lite)
   Image Added

   Pagebreak

3. Click the expand ( ) icon.

   Caption
   0 Figure 1 Expand Icon
   Image Modified

Tone Tables - Field Definitions

...

Panel
bgColor #FAFAFA borderStyle none
Specifies the frequency in Hertz. Frequency 2 is optional

Pagebreak

Amplitude 1 and Amplitude 2

...

Panel
bgColor #FAFAFA borderStyle none
Specifies that the tone is used in a double cadence form. This only applies to POTS fixed phones, where the high voltage ring signal is switched on and off to create the ringing pattern. In North America, the standard ring cadence is "2-4", or 2000 ms followed by 4000 ms of silence (default Sonus Spacevars 0 company SBC 1000/2000 ring cadence). In Australia and the UK, the standard ring cadence is 400 ms on, 200 ms off, 400 ms on, 2000 ms off (or double cadence).

Pagebreak