Page History
| Panel | |
|---|---|
In this section:
|
...
| Column | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
...
| Info |
|---|
...
|
...
- This document details how to configure SMM Rules to restore upper-case letters in a customer SIP header.
| |
Related articles: |
...
Prerequisites
| Tip |
|---|
Requires Sonus SBC1000/2000 Version 2.2 or later |
...
| Info |
|---|
This document assumes the user has a working knowledge of the SBC, its WebUI and the SMM function. |
...
Summary
When adding a custom SIP header, the case of letters in the added header is not preserved. To restore the proper case, a second SMM entry, using the Raw Rule, is needed.
Input Invite
...
INVITE sip:6001@10.1.24.57:5060;user=phone SIP/2.0
user-to-user: 04412C312C49412C696476313130302C49445F552C41522C2C2C2C4E2C4E2C4E6F6E652C;encoding=hex
Allow: INVITE, ACK, CANCEL, BYE, UPDATE, NOTIFY, OPTIONS, REFER, REGISTER
Call-ID: call-8AA25A00-0000-0010-0C13-29@10.1.24.37
Contact: <sip:07768200610@10.1.24.37:5060;transport=UDP>
Content-Length: 263
Content-Type: application/sdp
CSeq: 1 INVITE
From: <sip:07768200610@10.1.24.37:5060>;tag=c0a8e61b-61
Max-Forwards: 70
P-Asserted-Identity: <sip:07768200610@10.1.24.37:5060>
Referred-By: <sip:33333@10.1.24.80;transport=tcp>
Supported: replaces,update,100rel
To: <sip:6001@10.1.24.57:5060;user=phone>
User-Agent: NET UX 2.2.1v195 UX
Via: SIP/2.0/UDP 10.1.24.37:5060;branch=z9hG4bK-UX-c0a8-e61b-0439
...
| Panel |
|---|
...
Configuring SMM to Restore Upper-Case Letters
Create a Header Rule that adds the User-to-User header and populates it with the value stored in SG User Value 1. SG User Value 1 would have been populated using a different SMM rule at the ingress SG.
Panel borderStyle none Caption 0 Figure 1 Create SIP Header Rule
...
When the SBC creates the new header, the case of the letters is not preserved (all the upper-case letters are sent as lower-case). To re-establish the proper case, make a second entry in the SMM table - a Raw Rule. Set the regex input to the lower-case and the regex output to the desired case. The Raw Rule will restore the desired case.
Panel borderStyle none Caption 0 Figure 1 Create SIP Raw Message Rule 
...
...
Apply the SMM Table to the egress Signaling Group.
| Panel | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
|
| Pagebreak |
|---|
Output Invite
| Panel |
|---|
INVITE sip:6001@10.1.24.57:5060;user=phone SIP/2.0
User-to-User: 04412C312C49412C696476313130302C49445F552C41522C2C2C2C4E2C4E2C4E6F6E652C;encoding=hex
Allow: INVITE, ACK, CANCEL, BYE, UPDATE, NOTIFY, OPTIONS, REFER, REGISTER
Call-ID: call-8AA25A00-0000-0010-0C13-29@10.1.24.37
Contact: <sip:07768200610@10.1.24.37:5060;transport=UDP>
Content-Length: 0
Content-Type: application/sdp
CSeq: 1 INVITE
From: <sip:07768200610@10.1.24.37:5060>;tag=c0a8e61b-61
Max-Forwards: 70
P-Asserted-Identity: <sip:07768200610@10.1.24.37:5060>
Referred-By: <sip:33333@10.1.24.80;transport=tcp>
Supported: replaces,update,100rel
To: <sip:6001@10.1.24.57:5060;user=phone>
User-Agent: NET UX 2.2.1v195 UX
Via: SIP/2.0/UDP 10.1.24.37:5060;branch=z9hG4bK-UX-c0a8-e61b-0439
...
Overview
Content Tools