...
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Profiles - Signaling - Internal Sip Cause Map Profile - Cause Map - Main Field |
|---|
|
 Image Modified |
To Edit Cause Map
...
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Trunk Provisioning - Trunk Provisioning - SIP Trunk Group |
|---|
|
Parameter | Description |
|---|
Internal Cause | Specifies the option to configure custom SIP cause response codes. Options are: Congestion Policing – SIP cause code used when an initial SUBSCRIBE request is rejected due to Adaptive Overload Control. This internal cause code is mapped to 503 by default, and a Retry-After header is added to SIP response. The Retry-After value is randomized between 'retryAfterMin' and 'retryAfterMax' values. The 'retryAfterMin' and 'retryAfterMax' values must be configured under Ingress Trunk Group in CLI. Refer to sipTrunkGroup congestionHandling SIP Trunk Group - Congestion Handling - CLI to configure these parameters.
Other Req Rate Policing – Cause code when a message rate other than REGISTER or SUBSCRIBE exceeds IP trunk group's maximum configured value.Register Rate Policing – Cause code when REGISTER message rate exceeds IP trunk group's maximum configured value.Register TGLimit – Cause code when current REGISTRATION exceeds IP trunk group's maximum registration limit.Register Timeout – Cause code from REGISTER request timeout.Subscription Rate Policing – Cause code when SUBSCRIBE message rate exceeds IP trunk group's maximum configured value.
Subscription TGLimit – Cause code when current Subscription on IP trunk group exceeds maximum configuration limit.
| Sip Cause
| Specifies the response code to use when a received SIP message other than an INVITE or a REGISTER is rejected due to congestion in the SBC. The value ranges from 300 to 606. |
|
...
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Profiles - Signaling - Internal Sip Cause Map Profile - Cause Map - Delete Confirmation |
|---|
|
|
Click OK Yes to remove the specific Cause Map from the list.