Page History
| Add_docset_workflow | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Info |
|---|
The SBC supports IPv4 addresses for this feature; IPv6 is not supported. |
Include Page
| Excerpt Include | ||||||
|---|---|---|---|---|---|---|
|
...
| Panel | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
|
| Pagebreak |
|---|
Field Definitions - System Information
...
| Panel | ||||
|---|---|---|---|---|
| ||||
Enter the Host Name for the SBC. This is typically useful when you plan to join SBC to a domain. This field is required. Refer to Hostname Conventions for hostname rules. |
Internet Domain Name
| Panel | ||||
|---|---|---|---|---|
| ||||
Typically useful if the SBC system resides on a network that uses an internet domain name (such as sonus.net). This field is displayed only when Static is selected from the Network Configuration field. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
Use this list box to select the desired logging level. Valid options: Trace, Debug, Informational, Warning, Error or Fatal. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
Use this list box to select the transport protocol for the logging information. Valid selections: UDP or TCP. |
Log Facility
| Panel | ||||
|---|---|---|---|---|
| ||||
Select a logging facility code to insert in the transmitted log such that the entries can be filtered. For more information see
|
Use NTP
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies whether the NTP will be used as a time source. Valid entries: Yes (NTP is used as the time source) or No (NTP is not used as the time source). Default entry: Yes. |
NTP Server
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies the host name or IP address of the NTP server. If the hostname is supplied, the
|
NTP Server Authentication
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies whether authentication is used for communicating with the NTP server. Valid entries: Enabled (Authentication is used with NTP Server) or Disabled (Authentication is not used with NTP Server). |
NTP Server - MD5 Key ID
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies the MD5 Key ID to be used in authenticating the first NTP server. This field is visible only when the NTP Server Authentication field is set to Enabled. |
NTP MD5 Key
Specifies the MD5 key used when authenticating the first NTP Server.
Field Definitions - Easy System Configuration
...
| Panel | ||||
|---|---|---|---|---|
| ||||
The Easy Setup feature provides a template for end-users to quickly configure and deploy Sonus SBC 1000/2000. When Easy Setup is enabled, a user interface Wizard is provided upon login. Items such as endpoint (define user and provider), routing (routing configuration applied to scenario), and country (tone table parameters and emergency numbers for a particular country) are configured. If you choose not to deploy the Wizard at initial setup, it is available through the Tasks tab for later configuration. Options: Launch on First Login. Easy Setup is launched following initial setup. See Working with SBC Easy Configuration for configuration details. Do Not Launch. Easy Setup is not launched following initial setup. To configure the Wizard later, see Running Using the Easy Configuration Wizard. |
Field Definitions - IP Address
...
Re-enter the same password for the REST user as you configured in the Enter Password field.
| Pagebreak |
|---|
Field Definitions - Connectivity Information
...
The Additional Static IP Route configuration enables you to create static routes/gateways for the additional Ethernet interface, if required. To create a static route, click the ( 
) icon in the Additional Static IP Routes section. Enter the fields with the definitions below and click OK. For detailed information about adding Static routes, see Creating Entries in a Static IP Route Table.
...
| Tip |
|---|
Once you have clicked OK, you may connect the Sonus SBC 2000 to your network using Ethernet Port 1. The SBC will now be reachable on its new IP address - you may browse to it now. |
| Pagebreak |
|---|
Overview
Content Tools